MSD601 NPN General Purpose Transistors 3 P b Lead(Pb)-Free 1 2 SOT-23 MAXIMUM RATINGS(Ta=25°C) Symbol Value Unit Collector-Emitter Voltage VCEO 50 V Collector-Base Voltage VCBO 60 V Emitter-Base Voltage VEBO 7.0 V Collector Current - Continuous IC 100 mA Collector Current - Peak IC(P) 200 mA Total Device Dissipation TA=25°C PD 0.2 mW Junction Temperature Tj +150 °C Storage Temperature Tstg -55 to +150 °C Rating WEITRON http://www.weitron.com.tw 1/6 18-Sep-06 MSD601 ELECTRICAL CHARACTERISTICS Characteristics Symbol Min Typ Max Unit Collector-Emitter Breakdown Voltage IC = 2.0mA, IE = 0A V(BR)CEO 50 - - V Collector-Base Breakdown Voltage IC = 10µA, IB = 0A V(BR)CBO 60 - - V Emitter-Base Breakdown Voltage IE= 10µA, I C=0 V(BR)EBO 7.0 - - V Collector Cutoff Current VCB = 45V, I C = 0A ICBO - - 0.1 µA Emitter Cutoff Current VEB = 10V, I C = 0A ICEO - - 0.1 µA VCE(sat) - - 0.5 V hFE 90 - - ON CHARACTERISTICS Collector-Emitter Saturation Voltage IC = 100mA, I B = 10mA DC Current Transfer Ration1 VCE =2.0V, IC = 100mA 1.Pulse Test : Pulse Width ≤ 300µs, D.C. ≤ 2% CLASSIFICATION hFE @VCE = 10V, I C = 2.0mA Rank R S Range 210-340 290-460 Marking YR YS WEITRON http://www.weitron.com.tw 2/6 18-Sep-06 MSD601 SOT-23 Outline Dimension Unit:mm A SOT-23 B TOP VIEW C D E G H K J L M Dim A B C D E G H J K L M Min 0.35 1.19 2.10 0.85 0.46 1.70 2.70 0.01 0.89 0.30 0.076 Max 0.51 1.40 3.00 1.05 1.00 2.10 3.10 0.13 1.10 0.61 0.25 0.95 0.95 2.0 0.9 0.8 WEITRON http://www.weitron.com.tw 3/6 18-Sep-06 MSD601 Tape & Reel and Packaging Specifications for Small-Signal Transistors, FETs and Diodes Embossed Tape and Reel is used to facilitate automatic pick and place equipment feed requirements. The tape is used as the shipping container for various products and requires a minimum of handling. The antistatic/conductive tape provides a secure cavity for the product when sealed with the “peel–back” cover tape. • Two Reel Sizes Available (7"and 13",) • SOT–23, SC–70/SOT–323, • Used for Automatic Pick and Place Feed Systems SC–89, SC–88/SOT–363,SC–88A/SOT–353, • Minimizes Product Handling SOD–323, SOD-523 in 8 mm Tape • EIA 481, –1, –2 Use the standard device title and add the required suffix as listed in the option table below (Table 1). Note that the individual reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimum lot size is one full reel for each line item, and orders are required to be in increments of the single reel quantity. SOD-323 SC-59, SC-70, SC-75,SOT-23 8 mm 8 mm SC-88, SOT-363 T1 Orientation SC-88A, SOT-353 T1 Orientation 8 mm 8 mm Direction of Feed Typical Reel Orientations Table 1. EMBOSSED TAPE AND REEL ORDERING INFORMATION Package Tape Width (mm) Pitch mm Reel Size mm(inch) Devices Per Reel and Minimum Device Suffix Order Quantity SOT–23 SC–70/SOT–323 SC–89 SC–88/SOT-363 SC–88A/SOT-353 SOD-323 SOD-523 WEITRON http://www.weitron.com.tw 8 4 178 (7) 3,000 8 4 330 (13) 10,000 8 4 178 (7) 3,000 8 4 330 (13) 10,000 8 4 178 (7) 3,000 8 4 330 (13) 10,000 8 4 178 (7) 3,000 8 4 330 (13) 10,000 8 4 178 (7) 3,000 8 4 330 (13) 10,000 8 4 178 (7) 3,000 8 4 330 (13) 10,000 8 4 178 (7) 3,000 8 4 330 (13) 10,000 4/6 18-Sep-06 MSD601 EMBOSSED TAPE AND REEL DATA FOR DISCRETES CARRIER TAPE SPECIFICATIONS 10 Pitches Cumulative Tolerance on Tape ±0.2 mm P0 K t P2 D E Top Cover Tape A0 K0 B1 F W B0 P # Note 1 D1 For Components 2.0 mm x 1.2 mm and Larger Center Lines of Cavity Embossment User Direction of Feed FOR MACHINE REFERENCE ONLY0 INCLUDING DRAFT AND RADII CONCENTRIC AROUND B 0 R Min Top Cover Tape Thickness 0.10 mm Max. Barcode Label Tape and Components Shall Pass Around Radius “R” Without Damage Bending Radius 10° Embossed Carrier 100 mm Maximum Component Rotation Embossment 1 mm Max Typical Component Cavity Center Line Tape 1 mm Max 250 mm Camber (Top View) Allowable Camber To Be 1 mm/100 mm Nonaccumulative Over 250 mm Typical Component Center Line DIMENSIONS Size B1 Max 8mm 4.55 mm 1.5+0.1 mm #(Note 2) D -0.0 D1 1.0 Min E F K 1.75±0.1 mm 3.5±0.05 mm 2.4 mm Max 5.5±0.05 mm 6.4 mm Max P0 P2 4.0±0.1 mm 2.0±0.1 mm R Min T Max W Max 25 mm 0.6 mm 8.3 mm 12mm 8.2 mm 16mm 12.1 mm 7.5±0.10 mm 7.9 mm Max 16.3 mm 24mm 20.1 mm 11.5±0.1 mm 11.9 mm Max 24.3 mm 1.5 mm Min 30 mm 12±0.3 mm Metric dimensions govern - English are in parentheses for reference only. NOTE 1: A 0, B 0 , and K 0 are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to.50 mm max., NOTE 2: the component cannot rotate more than 10 o within the determined cavity. NOTE 3: If B1 exceeds 4.2 mm for 8 mm embossed tape, the tape may not feed through all tape feeders. WEITRON http://www.weitron.com.tw 5/6 18-Sep-06 MSD601 EMBOSSED TAPE AND REEL DATA FOR DISCRETES D (MEASURED AT HUB) E (MEASURED AT OUTER EDGE) 20.2 MIN 330.0 MAX 13.2 to 12.8 (ARBOR HOLE) A (HUB DIA) 3.5 to 2.5 TAPE START SLOT DETAIL A C (MEASURED AT INNER HUB) 1.6 DETAIL A A C D (Max) E (Max) 9.9 14.4 10.9 9.9 14.4 10.9 Reel Diameter Tape Size Min Max Min Max 178.0 8.0 50.0 - 8.4 330.0 8.0 50.0 - 8.4 Reel Dimensions Metric Dimensions Govern - English are in parentheses for reference only Storage Conditions Temperature: 5 to 40 Deg.C (20 to 30 Deg. C is preferred) Humidity: 30 to 80 RH (40 to 60 is preferred ) Recommended Period: One year after manufacturing (This recommended period is for the soldering condition only. The characteristics and reliabilities of the products are not restricted to this limitation) WEITRON http://www.weitron.com.tw 6/6 18-Sep-06