Sharma Film Capacitors MKTMPX SERIES SAFETY RECOGNIZED FILM CAPACITOR 1. 2. 3. 4. 5. 6. Rated Interference Suppression "X2" Metallized Polypropylene Composite dielectric. UL 1414 (250V AC), CUL 1414/Canda (250V VAC) VDE KEMA SEV NEMKO DEMKO SEMKO FIMKO CHINA: DIN EN 132400 (1994) / IEC60382-14 (1993) AND IEC DRAFT 40 (SEC)677 Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer circuits and available for EMI filter and switching power supply and radio-and monitor, television application. Flame retardant plastic cases and epoxy resin. (compliance with 94V-0) Self-healing properties. Proven series wound construction. Approved By : UL, CSA, VDE, KEMA, SEV, NEMKO, DEMKO, SEMKO, FIMKO, CHINA. V D E CQC SPECIFICATIONS : DISSIPATION FACTOR MAXIMUM PULSE RISE TIME -40 к to +100 к 280VAC 0.0022 ~ 4.7uF Applied 1500VDC for 1minute or 2100VDC for 1 second. +-10% (K) Measured after a charging voltage 100 ±15VDC for 1 minute. LESS THAN OR EQUAL TO 0.33PF Њ 30,000M: GREATER THAN 0.33PF Њ 10,000M:ΗPF 0.1% MAX. at 1KHz 250 VAC: 120 V/microsecond. PF SIZE 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047 0.056 0.068 0.068 0.082 0.1 0.1 0.1 0.12 0.15 0.15 0.18 0.18 0.22 T 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 5.0 6.0 6.0 6.0 5.0 5.5 6.0 6.0 5.5 6.5 7.5 6.0 8.5 6.0 8.5 OPERATING TEMPERATURE RATED VOLTAGE CAPACITANCE RANGE DIELECTRIC STRENGTH CAPACITANCE TOLERANCE INSULATION RESISTANCE W 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 13.0 13.0 13.0 18.0 18.0 13.5 18.0 18.0 18.0 18.0 26.5 18.0 26.5 18.0 Dimension H 9.0 9.0 9.0 9.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 11.5 13.0 13.5 15.0 14.5 16.0 14.5 P 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 10.0 10.0 10.0 15.0 15.0 10.0 15.0 15.0 15.0 15.0 22.5 15.0 22.5 15.0 dO 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 PF SIZE 0.22 0.27 0.33 0.33 0.33 0.39 0.47 0.47 0.47 0.47 0.47 0.56 0.68 0.68 0.82 0.82 1.0 1.0 1.0 1.5 1.5 1.8 2.0 2.0 2.2 2.2 2.5 3.0 3.3 4.0 4.7 W 26.5 26.5 18.0 26.5 26.5 26.5 17.5 18.0 26.5 26.5 32.0 32.0 26.5 32.0 32.0 26.5 32.0 32.0 37.0 32.0 37.0 37.0 31.0 38.0 31.0 38.0 38.0 38.0 38.8 48.0 48.0 W max T max H max 25 ±2.0 dO P±0.5 H 16.5 16.5 14.5 16.5 17.0 20.0 19.0 16.0 17.0 20.0 20.0 20.0 20.0 20.0 22.0 20.0 20.0 22.0 25.0 22.0 26.5 29.0 31.0 28.0 31.0 29.0 30.0 30.0 31.3 30.0 30.0 (Unit : mm) T 7.0 8.5 8.5 7.0 8.5 10.0 11.0 10.0 8.5 10.0 11.0 11.0 10.0 11.0 13.0 10.0 11.0 13.0 13.5 13.0 17.0 19.0 22.0 18.0 22.0 19.0 20.0 20.0 21.7 30.0 30.0 P 22.5 22.5 15.0 22.5 22.5 22.5 15.0 15.0 22.5 22.5 27.5 27.5 22.5 27.5 27.5 22.5 27.5 27.5 31.5 27.5 31.5 31.5 27.5 31.5 27.5 31.5 31.5 31.5 31.5 41.5 41.5 dO 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8D Tolerance: +/- 0.5mm Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Film Capacitors MKTMPX SERIES (MAIN INTERFERENCE SUPPRESSION CAPACITORS) 1. 3. 4. 5. Class "X1" UL 1414 (250V AC), CAN/CSA-C22.2 NO. 1-94 (250V VAC) VDE SEV NEMKO DEMKO SEMKO FIMKO : DIN EN 132 400(1994) / IEC 384-14 (1993) AND IEC DRAFT 40 (SEC)677 Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer circuits and available for EMI filter and switching power supply and radio-and monitor, television application. Fame retardent plastic cases and epoxy resin. (compliance with UL 94V-0) Self-healing properties. Proven series wound construction. 6. Approved By : UL, CSA, VDE, SEV, NEMKO, DEMKO, SEMKO, FIMKO. 2. V D E SPECIFICATIONS : OPERATING TEMPERATURE RATED VOLTAGE CAPACITANCE RANGE DIELECTRIC STRENGTH CAPACITANCE TOLERANCE INSULATION RESISTANCE DISSIPATION FACTOR MAXIMUM PULSE RISE TIME μF SIZE 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047* 0.056 0.068 0.082 0.1 0.1* 0.12 0.15 * 0.15 0.18 0.18 W 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 13.0 18.0 18.0 18.0 13.0 18.0 18.0 18.0 26.5 18.0 26.5 H 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 11.0 11.0 12.0 12.0 12.0 12.0 12.0 13.5 13.0 14.5 15.0 14.5 16.5 TYPE : MEX-X1 -40 ℃ to +100 ℃ 300VAC 0.0047 ~ 2.2 μF Applied 1290VDC for 1minute or 4000VDC for 1 second. +-5% (J) +-10% (K) +-20% (M) Measured after a charging voltage 100 ±15VDC for 1 minute. (1) LESS THAN OR EQUAL TO 0.33μF ≧ 30,000MΩ (2) GREATER THAN 0.33μF ≧ 10,000MΩ .μF 0.1% MAX. at 1KHz 250 VAC: 120 V/microsecond. T 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 6.0 7.5 8.5 6.0 8.5 7.0 P 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 10.0 10.0 15.0 15.0 10.0 15.0 15.0 15.0 22.5 15.0 22.5 dO 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 μF SIZE 0.22 0.22 0.27 0.33 0.33 * 0.33 0.39 0.47 0.47 * 0.47 0.56 0.56* 0.68 0.68 0.82 1.0 1.0 * 1.0 1.5 1.5* 1.8 2.2 2.2* W 18.0 26.5 26.5 18.0 26.5 26.5 26.5 26.5 26.5 32.0 32.0 26.5 26.5 32.0 32.0 26.5 32.0 37.0 32.0 37.0 37.0 32.0 37.0 W max T max H max 20 min dO P±0.5 H 14.5 16.5 17.0 16.0 16.5 17.0 20.0 17.0 20.0 20.0 20.0 20.0 20.0 20.0 22.0 20.0 22.0 25.0 22.0 26.5 29.0 30.0 29.0 (Unit : mm) T 8.5 7.0 8.5 10.0 7.0 8.5 10.0 8.5 10.0 11.0 11.0 10.0 10.0 11.0 13.0 10.0 13.0 13.5 13.0 17.0 19.0 15.0 19.0 P 15.0 22.5 22.5 15.0 22.5 22.5 22.5 22.5 22.5 27.5 27.5 22.5 22.5 27.5 27.5 22.5 27.5 31.5 27.5 31.5 31.5 27.5 31.5 dO 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 * PREFERRED Tel: (949)642-7324 SECI Engineers and Buyers' Guide Fax: (949)642-7327 Sharma Film Capacitors MKTMPX PART NUMBERING EXPLANATION M K T M P X 2 K 2 8 1 R H X1=1 Series: MKTMPX X2=2 Value EIA code: Example: 104= .1uF Lead space/case code: Tolerance: Voltage code: Example: P15= 15mm RoHS 10% only 280VAC=281 P15A= 15mm compliant 300VAC-301 1st case size per table std. Packaging/ lead length code: blank= bulk, T= taped, CL(*)= special cut lead length Example: CL4= cut lead length of 4mm Part numbering examples: Description: MKTMPX2105K281P27.5BRH X2 type, 1uF/280VAC, 10%, 27.5mm lead spacing, RoHS 2nd case code option(B): W32,H22,T13 Standard lead length of 25mm, bulk packaged MKTMPX2473K281P15CL4RH X2 type, .047uF/280VAC, 10%, 15mm lead space, RoHS Cut lead length= 4mm, bulk packaged MKTMPX2103K281P10TRH X2 type, .01uF/280VAC, 10%, 10mm lead spacing, RoHS taped & box packaged Tel: (949)642-7324 SECI Engineers and Buyers' Guide Fax: (949)642-7327