HPU100 SERIES 100W Desk top type medical power supplies for Home health care applications. Description: The HPU100 series of AC/DC switching mode power supplies provide 100 Watts of continuous output power . All supplies are UL94V-1 min compliant, include IEC-320-C14 input for worldwide applications. They are suited for use in Home health care applications. All models meet FCC Part-18 Calss B and CISPR-11 EN55011 class B emission Limits and are designed to comply with UL/c-UL(UL 60601-1) ,TUV/T-mark (EN 60601-1) and new CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 260 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single Output Output Voltage Available From 11VDC Thru 48VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Output Voltage Protection Active Power Factor Correction Class I 2 year warranty Safety Approvals : Electrical Characteristics: Sym. Parameter Test Conditions Vin fin PF Po Vo Io Input Voltage Input Frequency Power Factor Correction Output Power Range Output Voltage Range Output Current Range Io=Full load, Vin=230 VAC Vin=90 to 260 VAC Iil Iih Input Current (Low Line) Input Current ( High Line) Io=Full load, Vin=115 VAC Io=Full load, Vin=230 VAC I rl Low Line Inrush Current I rh High Line Inrush Current Operating Voltage Eff REG-i REG -o Efficiency Io=Full load, 25 C , Cool start, Vin= 115VAC Io=Full load, 25 C , Cool start, Vin= 230VAC Io=Full Load, Vin=230VAC Line Regulation Load Regulation Io=Full Load Vin=230VAC OVP Over Voltage Protection Over Current Protection Time of Transient Response Hold-Up Time Start Up Time Ripple & Noise (Peak to Peak) Safety Ground Leakage C urrent Temperature Coefficient OCP Ttr Thold Ts Vrn Ilk TC Min. Typ. Max. Unit 260 90 47 63 0.95 1 100 0 See rating chart See rating chart W V A 1.35 0.5 A A 44 50 A 85 100 A 87 90 % 0.5 1 % 3 5 132 150 4 2 1.5 0.5 1 0.15 0.25 -0.04 0.04 % % % mS mS S % mA %/ C Min. Typ. Max. Unit 85 112 110 Io=Full Load to Half Load, Vin=100VAC Io=Full Load, Vin=110VAC Io=Full Load, Vi n= 10 0V AC Full Load, Vin=90VAC Io = Fu ll Load, V i n = 240 V A C/60Hz All output VAC Hz 12 0.3 Environmental : Sym. Toper Tstg Hr MTBF Pd Parameter Test Conditions Operating Temperature Storage Temperature Relative Humidity Operating Temperature at 25 C, Calculated per MIL-HDBK-217F Derate linearly from 100% load at 40 C to 50% load at 70 C 0 -40 5 0.1M 70 85 95 C C % Hrs HPU100 SERIES 100W Desk top type medical power supplies for Home health care applications. Safety Specifications: Sym. Parameter Test Conditions Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage Vpg for Primary to Ground Ris Isolation Resistance CISPR EMI requirements for CISPR-11 EMI requirements for FCC PART-18 FCC Vps Min. Typ. Max. Unit Primary to secondary 5600 VDC Primary to ground 2800 VDC 50 B B M CLASS CLASS Test Voltage = 2100VDC Vin=230VAC Vin=120VAC Output Voltage And Current Rating Chart (Single Output) : Model Number HPU100-105 HPU100-106 HPU100-107 HPU100-108 HPU100-109 HPU100-111 Output Voltage 11 13 16 21 27 40 ~ ~ ~ ~ ~ ~ 13 16 21 27 33 48 VDC VDC VDC VDC VDC VDC Output Current 9.09 7.69 6.25 4.76 3.70 2.50 ~ ~ ~ ~ ~ ~ 7.69 6.25 4.76 3.70 3.03 2.08 A A A A A A Total Regulation ① 5% 4% 4% 4% 3% 3% Maximum Output Power 100W 100W 100W 100W 100W 100W The output voltage under 30V had been approved by TUV/PSE. ① The total regulation on each model is required to use AWG#18×3C+ AWG#16×3C/4FT output cable. The regulation will be changed by modified output cable. Mechanical Specifications: Note: 1. Dimensions are shown in inches or mm. 2. Weight: 460-800gs approx. 3. Optional output connector: See page Appendix.