SMT GATE DRIVE TRANSFORMERS 1500VDC Basic and Operational Insulation 1500VDC isolation between Gate and Drive Basic insulation (1.4mm creepage/clearance) and operational available Operating frequency: 50kHz and up Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C 5 Part 3,4 Number Pri-Sec Insulation (VDC) Turns Ratio Leakage 2 Inductance (µH MAX) Primary Inductance (µH MIN) MAX 1 V*µsec DCR Primary (Ω MAX) DCR Secondary (Ω MAX) Package Size (L x W x H) (mm MAX) 0.60 2.00 1.60 0.80 0.75 0.60 2.00 1.60 0.80 0.75 8.6 x 6.7 x 2.5 8.0 x 6.6 x 5.3 9.0 x 8.6 x 7.6 7.2 x 6.1 x 3.8 8.6 x 6.7 x 3.6 0.62 0.88 0.91 0.91 0.91 0.88 0.62 0.91 0.46 0.380 11.8 x 8.8 x 4.0 11.8 x 8.8 x 4.0 9.0 x 8.6 x 7.6 9.0 x 8.6 x 7.6 9.0 x 8.6 x 7.6 OPERATIONAL INSULATION PE-68386NL 1:1 1500 9.7 785 0.46 P0926NL 1:1:1 1500 23.8 300 0.50 P0544NL 1:1:1 1500 45.1 3300 0.70 P2033 1:1 1500 9.3 500 17.00 PA0264NL 1:1:1 1500 12.7 1140 0.65 BASIC INSULATION (1.4 MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY) PA0173NL 1:1:1 1500 Vrms 17.2 980 0.75 PA0185NL 1:1 1500 Vrms 17.2 980 0.75 PA0184NL 1:1 1500 Vrms 27.2 1200 0.50 PA0297NL 2:1:1 1500 Vrms 27.2 1200 0.60 PA0510NL 2.5:1:1 1500 Vrms 27.2 1200 0.68 NOTES: 1.The maximum volt-µsec rating limits the peak flux density to 2200 Gauss when used in a unipolar drive application. For bi-polar drive applications a maximum volt-µsec of two times this rating is acceptable (ie: 2* (volt*µsec rating) Volt*µsec = (voltage applied to the primary) * dutycycle / Frequecy = V * alpha / Freq_Hz = V * µsec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3.Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard tape and reel specification EIA481. 4.The "NL" suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the "NL" suffix, but an RoHS compliant version is required, please contact Pulse for availability. 5.The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Mechanical Schematic .340 MAX 8,64 PE-68386 Date Code Country of Origin .050 1,27 4X .100 2,54 1 .265 MAX 6,73 .200 5,08 3 .005/0,13 4 SURFACES 4 2 3 3 4 Weight . . . . . . . . . . . . . .0.28 grams Tape & Reel . . . . . . . . . . .1500/reel Tube . . . . . . . . . . . . . . . . . .60/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 2 1 6 P0264 Date Code Country of Origin .100 2,54 .225 5,71 SUGGESTED PAD LAYOUT .340 MAX 8,64 1 6 6 .060 1,52 .098 MAX 2,49 1 5 .265 MAX 6,73 4 6 .200 5,08 .100 2,54 4X .100 2,54 .140 MAX 3,56 .005/0,13 6 SURFACES 5 3 .070 1,78 .220 5,59 .320 8,13 SUGGESTED PAD LAYOUT 4 Weight . . . . . . . . . . . . . .0.23 grams Tape & Reel . . . . . . . . . . . .800/reel Tube . . . . . . . . . . . . . . . . . .75/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 113 SPM2007 (6/08) SMT GATE DRIVE TRANSFORMERS 1500VDC Basic and Operational Insulation Mechanicals Schematics 6X .050 1,27 .146 3,71 6 3 4 .260 MAX 6,60 .340 MAX 8,64 7 6 .005/0,13 .300 7,62 3X .100 2,54 5 3 P0544 / PA0297 / PA0510 3 1 5 .050 1,27 Date Code Country of Origin 2 .060 1,52 1 .225 5,71 5 4 1 8 4 5 .035 0,89 .180 4,57 .340 8,64 (.050 1,27( .140 3,57 .035 0,89 (.050 1,27( Weight . . . . . . . . . . . . . .0.29 grams Tape & Reel . . . . . . . . . . .1200/reel Tube . . . . . . . . . . . . . . . . . .80/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 1 .025 0,64 .250 6,35 PA0173 PA0185 Date Code Country of Origin .330 8,38 SUGGESTED PAD LAYOUT 8X .430 10,92 .330 8,38 .460 11,68 (.150 3,81( P2033 Date Code Country of Origin 5 Weight . . . . . . . . . . . . . .0.60 grams Tape & Reel . . . . . . . . . . . .400/reel Tube . . . . . . . . . . . . . . . . . .50/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .005/0,13 .310 7,87 ( 1 .250 6,35 SUGGESTED PAD LAYOUT .005/0,13 6 SURFACES 8 SURFACES Dimensions: Inches mm PA0173 8 1 4 4 .100 2,54 .160 4,06 MAX .004/0,10 ( .070 1,78 6 3 .100 2,54 .010 0,25 .150 3,81 4 8 6 SURFACES .280 7,11 PA0184 1 SUGGESTED PAD LAYOUT 4 6 4 8 .300 MAX 7,62 .235 5,97 4 .100 2,54 8 Part Number 1 6 6 SURFACES .355 MAX 9,02 8 5 3 Weight . . . . . . . . . . . . . .0.48 grams Tape & Reel . . . . . . . . . . .1000/reel Tube . . . . . . . . . . . . . . . . . .80/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .210 MAX 5,33 .060 1,52 1 6X .050 1,27 .330 8,38 .315 MAX 8,00 2 .023 0,58 2 SUGGESTED 5 PAD LAYOUT 6X .024 0,61 P0926 Date Code Country of Origin .073 1,85 1 7 6 Unless otherwise specified, all tolerances are ± .010 0,25 2 Weight . . . . . . . . . . . . . .0.48 grams Tape & Reel . . . . . . . . . . . .900/reel Tube . . . . . . . . . . . . . . . . . .60/tube 5 3 1 4 3 PA0185 6 4 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 114 SPM2007 (6/08)