SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation >1500VDC isolation between Gate and Drive Basic insulation (1.4mm creepage/ clearance) and functional available Operating frequency: 50kHz and up Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C 5 Leakage 2 Inductance (µH MAX) DCR Primary (Ω MAX) DCR Secondary (Ω MAX) Package Size (L x W x H) (mm MAX) Turns Ratio Pri-Sec Insulation MAX V*µsec Primary Inductance (µH MIN) PE-68386NL 1:1 1500 Vdc 9.7 785 0.46 0.60 0.60 8.6 x 6.7 x 2.5 P0926NL 1:1:1 1500 Vdc 23.8 300 0.50 2.00 2.00 8.0 x 6.6 x 5.3 P0544NL 1:1:1 1500 Vdc 45.1 3300 0.80 1.25 1.25 9.0 x 8.6 x 7.6 PA0264NL 1:1:1 1000 Vrms 12.7 1140 0.65 0.75 0.75 8.6 x 6.7 x 3.6 PA1323NL 1:1 1500 Vrms 21.7 600 2.0 1.25 1.25 9.5 x 7.1 x 5.3 3,4 Part Number Functional Insulation 1 Basic Insulation (1.4mm creepage and clearance between Primary and Secondary) PA0173NL 1:1:1 1500 Vrms 17.2 980 0.75 0.62 0.88 11.8 x 8.8 x 4.0 PA0185NL 1:1 1500 Vrms 17.2 980 0.75 0.88 0.62 11.8 x 8.8 x 4.0 PA0184NL 1:1 1500 Vrms 27.2 1200 0.50 0.91 0.91 9.0 x 8.6 x 7.6 PA0297NL 2:1:1 1500 Vrms 27.2 1200 0.60 0.91 0.46 9.0 x 8.6 x 7.6 PA2777NL 1:1 1500 Vrms 9.3 335.2 0.36 0.70 0.70 7.1 x 6.1 x 5.5 PA0510NL 2.5:1:1 1500 Vrms 27.2 1200 0.68 0.91 0.380 9.0 x 8.6 x 7.6 PA3493NL 1.25:1 1650 Vrms 23 656 1.3 1.03 0.85 10.9 x 9.7 x 2.7 Notes: 1. The Maximum volt-µsec rating limits the peak flux density to 2200 Gauss when used in a unipolar drive application. For bi-polar drive applications, a maximum volt-sec of two times this rating is acceptable (ie: 2* (volt*µsec rating) = (voltage applied to the primary) * dutycycle / Frequency = V * alpha / Freq_Hz = V * µsec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard tape and reel specification EIA481. 113 pulseelectronics.com 4. The “NL” suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the “NL” suffix, but an RoHS compliant version is required, please contact Pulse for availability. 5. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. SPM2007 (04/14) SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals Schematics PE-68386NL 1 6 3 4 Weight .............................0.28 grams Tape & Reel .........................1500/reel Tube ......................................60/tube Inches mm .010 Unless otherwise specified, all tolerances are ± 0,25 Dimension: SUGGESTED PAD LAYOUT PA0264NL NL Weight .............................0.28 grams Tape & Reel .........................1500/reel Tube ......................................60/tube Inches mm .010 Unless otherwise specified, all tolerances are ± 0,25 Dimension: P0926NL NL Weight .............................0.48 grams Tape & Reel .........................1000/reel Tube ......................................80/tube Inches mm .010 Unless otherwise specified, all tolerances are ± 0,25 Dimension: pulseelectronics.com SPM2007 (04/14) SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals (continued) Schematics P0544NL, PA0297, PA0510, PA0184NL Weight .............................0.60 grams Tape & Reel ............................40/reel Tube ......................................50/tube Inches mm .010 Unless otherwise specified, all tolerances are ± 0,25 Dimension: PA0173, PA0185 Weight .............................0.48 grams Tape & Reel ..........................900/reel Tube .......................................60/tube Inches mm .010 Unless otherwise specified, all tolerances are ± 0,25 Dimension: 114 pulseelectronics.com SPM2007 (04/14) SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Schematics Mechanicals (continued) PA3493NL mm mm 0$; mm mm mm 0$; mm DATE CODE CTRY OF MFG 3 mm mm ______________ 6 1 ______________ ______________ ______________ 4 1 6 3 4 Weight .............................0.31 grams Tape & Reel .........................1250/reel Tube ......................................50/tube SUGGESTED FOOTPRINT Dimension: mm Unless otherwise specified, all tolerances are ± 0,25 mm 0$; 685)$&(6 PA2777NL 6.3 6.3mm MAX 5.9mm MAX 8X 0.76 8X 0.508mm 8X 1.52 8X 0.89mm 7.4mm MAX .15 4.06±.25mm 4.45 0.127 3X 1.27mm 3X 1.27 BOTTOM VIEW TOP VIEW FINAL OUTLINE 115 6.22 pulseelectronics.com SUGGESTED LAND PATTERN Weight .............................0.32 grams Tape & Reel ..........................850/reel Tube ......................................120/tube Dimension: mm Unless otherwise specified, all tolerances are ± 0,25 SPM2007 (04/14) SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Schematics Mechanicals (continued) PA1323NL 1 6 3 4 Weight ...............................0.4 grams Tape & Reel ..........................700/reel Tube .....................................225/tube 7.11mm MAX Dimension: mm Unless otherwise specified, all tolerances are ± 0,25 5.33mm MAX 0.127 1.27mm .609X.254 (4X)2.54mm REF 1.27mm 5.08mm 2.54mm 9.52mm MAX 9.52mm 5.08mm REF pulseelectronics.com SPM2007 (04/14)