TVS RECTRON TFMBJ SEMICONDUCTOR TECHNICAL SPECIFICATION SERIES SURFACE MOUNT GPP GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory Glass passivated chip construction 600 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time DO-214AA 0.083 (2.11) 0.077 (1.96) 0.155 (3.94) 0.130 (3.30) 0.180 (4.57) 0.160 (4.06) Ratings at 25 o C ambient temperature unless otherwise specified. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0.004 (0.102) 0.220 (5.59) 0.205 (5.21) Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types TFMBJ5.0 thru TFMBJ170 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) SYMBOL VALUE UNITS Peak Power Dissipation with a 10/1000uS (Note 1,2, Fig.1) P PPM Minimum 600 Watts Peak Pulse Current with a 10/1000uS waveform ( Note 1, Fig.3 ) I PPM SEE TABLE 1 Amps PM(AV) 5.0 Watts I FSM 100 Amps VF SEE NOTE 4 Volts T J , T STG -55 to + 150 RATINGS Steady State Power Dissipation at T L = 75oC (Note 2) Peak Forward Surge Current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) (Note 2,3) unidirectional only Maximum Instantaneous Forward Voltage at 50A for unidirectional only (Note 3,4) Operating and Storage Temperature Range NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2. 2. Mounted on 0.2 X 0.2”( 5.0 X 5.0mm ) copper pad to each terminal. 3. Lead temperature at TL = 25oC 4. Measured on 8.3mS single half sine-wave duty cycle = 4 pules per minute maximum. 5. VF = 3.5V on TFMBJ-5.0 thru TFMBJ-90 devices and VF = 5.0V on TFMBJ-100 thru TFMBJ-170 devices. 0 C 2002-12 FIG. 1 - PEAK PULSE POWER RATING CURVE 100 Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25 10 1.0 0.2X0.2"(5.0X5.0mm) copper pad areas 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS TP, PULSE WIDTH, sec 10mS PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% PPPM, PEAK PULSE POWER, KW RATING AND CHARACTERISTIC CURVES ( TFMBJ5.0 THRU TFMBJ170CA ) FIG. 2 - PULSE DERATING CURVE 100 75 50 25 0 0 25 FIG. 4 - TYPICAL JUNCTION CAPACITANCE FIG. 3 - PULSE WAVEFORM 6,000 tr = 10usec. f = 1.0 MHz Vsig = 50mVp-p TJ = 25 Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM Peak Value IPPM 100 IPPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. 50 CJ, CAPACITANCE, pF IPPM, PEAK PULSE CURRENT,% 150 td 2.0 3.0 4.0 t, TIME,mS FIG. 5 - TYPICAL JUNCTION CAPACITANCE BIDIRECTIONAL 6,000 f = 1.0 MHz Vsig = 50mVp-p TJ = 25 Measured at Zero Bias 1,000 Measured at Stand off Voltage,VWM 100 10 1.0 1,000 Measured at Stand off Voltage,VWM 100 1.0 10 100 200 V(WM), BREAKDOWN VOLTACE, VOLTS 1.0 IFSM, PEAK FORWARD SURGE CURRENT AMPERES 0 Measured at Zero Bias 10 0 CJ, JUNCTION CAPACITANCE,pF 75 100 125 150 175 200 50 TA, AMBIENT TEMPERATURE,( ) 10 100 200 V(WM), BREAKDOWN VOLTACE, VOLTS FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL 200 8.3ms Single Half Sine-Wave (JEDED Method) Unidirectional only 100 10 1 10 NUMBER OF CYCLES AT 60 Hz RECTRON 100 TRANSIENT VOLTAGE SUPPRESSORS 600W SERIES TVS DIODES / DO-214AA ( CASE 3 ) 600W Rectron Industry No. SMBJ5.0 SMBJ5.0A SMBJ6.0 SMBJ6.0A SMBJ6.5 SMBJ6.5A SMBJ7.0 SMBJ7.0A SMBJ7.5 SMBJ7.5A SMBJ8.0 SMBJ8.0A SMBJ8.5 SMBJ8.5A SMBJ9.0 SMBJ9.0A SMBJ10 SMBJ10A SMBJ11 SMBJ11A SMBJ12 SMBJ12A SMBJ13 SMBJ13A SMBJ14 SMBJ14A SMBJ15 SMBJ15A SMBJ16 SMBJ16A SMBJ17 SMBJ17A SMBJ18 SMBJ18A SMBJ20 SMBJ20A SMBJ22 SMBJ22A SMBJ24 SMBJ24A SMBJ26 SMBJ26A SMBJ28 SMBJ28A SMBJ30 SMBJ30A SMBJ33 SMBJ33A SMBJ36 SMBJ36A Rectron House No. TFMBJ5.0 TFMBJ5.0A TFMBJ6.0 TFMBJ6.0A TFMBJ6.5 TFMBJ6.5A TFMBJ7.0 TFMBJ7.0A TFMBJ7.5 TFMBJ7.5A TFMBJ8.0 TFMBJ8.0A TFMBJ8.5 TFMBJ8.5A TFMBJ9.0 TFMBJ9.0A TFMBJ10 TFMBJ10A TFMBJ11 TFMBJ11A TFMBJ12 TFMBJ12A TFMBJ13 TFMBJ13A TFMBJ14 TFMBJ14A TFMBJ15 TFMBJ15A TFMBJ16 TFMBJ16A TFMBJ17 TFMBJ17A TFMBJ18 TFMBJ18A TFMBJ20 TFMBJ20A TFMBJ22 TFMBJ22A TFMBJ24 TFMBJ24A TFMBJ26 TFMBJ26A TFMBJ28 TFMBJ28A TFMBJ30 TFMBJ30A TFMBJ33 TFMBJ33A TFMBJ36 TFMBJ36A Breakdown Voltage VBR @IT (Volts) MIN. MAX. (mA) Reverse Stand off Voltage VWM (Volts) 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 800.0 800.0 800.0 800.0 500.0 500.0 200.0 200.0 100.0 100.0 50.0 50.0 20.0 20.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 62.5 65.2 52.6 58.3 48.8 53.6 45.1 50.0 42.0 46.5 40.0 44.1 37.7 41.7 35.5 39.0 31.9 35.3 29.9 33.0 27.3 30.2 25.2 27.9 23.3 25.9 22.3 24.6 20.8 23.1 19.7 21.7 18.6 20.5 16.8 18.5 15.2 16.9 14.0 15.4 12.9 14.3 12.0 13.2 11.2 12.4 10.2 11.3 9.3 10.3 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 RECTRON TRANSIENT VOLTAGE SUPPRESSORS 600W SERIES TVS DIODES / DO-214AA ( CASE 3 ) 600W Rectron Industry No. SMBJ40 SMBJ40A SMBJ43 SMBJ43A SMBJ45 SMBJ45A SMBJ48 SMBJ48A SMBJ51 SMBJ51A SMBJ54 SMBJ54A SMBJ58 SMBJ58A SMBJ60 SMBJ60A SMBJ64 SMBJ64A SMBJ70 SMBJ70A SMBJ75 SMBJ75A SMBJ78 SMBJ78A SMBJ85 SMBJ85A SMBJ90 SMBJ90A SMBJ100 SMBJ100A SMBJ110 SMBJ110A SMBJ120 SMBJ120A SMBJ130 SMBJ130A SMBJ150 SMBJ150A SMBJ160 SMBJ160A SMBJ170 SMBJ170A Notes : Rectron House No. TFMBJ40 TFMBJ40A TFMBJ43 TFMBJ43A TFMBJ45 TFMBJ45A TFMBJ48 TFMBJ48A TFMBJ51 TFMBJ51A TFMBJ54 TFMBJ54A TFMBJ58 TFMBJ58A TFMBJ60 TFMBJ60A TFMBJ64 TFMBJ64A TFMBJ70 TFMBJ70A TFMBJ75 TFMBJ75A TFMBJ78 TFMBJ78A TFMBJ85 TFMBJ85A TFMBJ90 TFMBJ90A TFMBJ100 TFMBJ100A TFMBJ110 TFMBJ110A TFMBJ120 TFMBJ120A TFMBJ130 TFMBJ130A TFMBJ150 TFMBJ150A TFMBJ160 TFMBJ160A TFMBJ170 TFMBJ170A Breakdown Voltage VBR @IT (Volts) MIN. MAX. 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 133 133 144 144 167 167 178 178 189 189 54.3 49.1 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 86.9 78.6 95.1 86.0 102 92.1 106 95.8 115 104 122 111 136 123 149 135 163 147 176 159 204 185 218 197 231 209 (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reverse Stand off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 8.4 9.3 7.8 8.6 7.5 8.3 7.0 7.8 6.6 7.3 6.2 6.9 5.8 6.4 5.6 6.2 5.3 5.8 4.8 5.3 4.5 5.0 4.3 4.8 4.0 4.4 3.8 4.1 3.4 3.7 3.1 3.4 2.8 3.1 2.6 2.9 2.2 2.5 2.1 2.3 2.0 2.2 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 1. VBR measured after IT applied for 300ms. IT = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. SMBJ5.0C,SMBJ170CA) electrical characteristics apply in both directions. 3. For bidirectional types having VWM of 10 volts and less, the ID limit is doubled. 4. All devices UL listed file# E211196. RECTRON Mounting Pad Layout 0.106 MAX. (2.69 MAX.) 0.083 MIN. (2.10 MIN.) 0.050 MIN. (1.27 MIN.) 0.220 REF Dimensions in inches and (millimeters) RECTRON