TVS RECTRON P6KE SEMICONDUCTOR TECHNICAL SPECIFICATION SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory Glass passivated chip construction 600 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time DO-15 1.0 (25.4) MIN. .034 (0.9) DIA. .028 (0.7) .300 (7.6) .230 (5.8) .140 (3.6) .104 (2.6) Ratings at 25 o C ambient temperature unless otherwise specified. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS DIA. 1.0 (25.4) MIN. o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types P6KE6.8 thru P6KE400 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) RATINGS Peak power dissipation with a 10/1000uS (NOTES 1, FIG.1) SYMBOL VALUE UNITS P PPM Minimum 600 Watts P M(AV) 5.0 Watts I FSM 100 Amps VF 3.5/5.0 Volts T J , T STG -55 to + 150 Steady state power dissipation at T L = 75oC lead lengths, .375” ( 9.5 mm ) ( NOTES 2 ) Peak forward surge current, 8.3ms single half sine wavesuperimposed on rated load( JEDEC METHOD ) ( NOTES 3 ) Maximum instantaneous forward voltage at 50A for unidirectional only ( NOTES 4 ) Operating and storage temperature range o NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig.2. 2. Mounted on copper pad area of 1.6 X 1.6”( 40X40 mm) per Fig. 5 3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum. 4. VF = 3.0V max. for devices of V(BR) < 200V and VF = 5.0 Volts for devices of V(BR) > 200V. 0 C 2002-12 PPPM, PEAK PULSE POWER, KW FIG. 1 - PEAK PULSE POWER RATING CURVE 100 Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25 10 1.0 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% RATING AND CHARACTERISTIC CURVES ( P6KE6.8 THRU P6KE400CA ) FIG. 2 - PULSE DERATING CURVE 100 75 50 25 0 10mS 0 TP, PULSE WIDTH, sec 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE,( 200 ) FIG. 4 - TYPICAL JUNCTION CAPACITANCE FIG. 3 - PULSE WAVEFORM 150 6,000 tr = 10usec. f = 1.0 MHz Vsig = 50mVp-p TJ = 25 Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM CJ, CAPACITANCE, pF IPPM, PEAK PULSE CURRENT,% 25 Peak Value IPPM 100 IPPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. 50 td 1,000 Measured at Stand off Voltage,VWM 100 10 0 0 Measured at Zero Bias 1.0 2.0 t, TIME,mS 3.0 4.0 1.0 10 100 200 V(BR), BREAKDOWN VOLTACE, VOLTS RECTRON RATING AND CHARACTERISTIC CURVES ( P6KE6.8 THRU P6KE400CA ) FIG. 5 - STEADY STATE POWER DERATING CURVE FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL L IFSM, PEAK FORWARD SURGE CURRENT AMPERES 200 60Hz Resistive or Inductive Load = 0.375"(9.5mm) Lead Lengths 3.75 2.5 1.6X1.6X.040" (40X40X1mm) Copper Heat Sinks 1.25 8.3ms Single Half Sine-Wave (JEDED Method) 100 10 0 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE ( 175 200 1 10 ) NUMBER OF CYCLES AT 60 Hz FIG. 7 -TYPICAL REVERSE LEAKAGE CHARACTERISTICS ID, INSTANTANEOUS REVERSE LEAKAGE CHRRENT, MICROAMPERES PM(AV), STEADY STATE POWER DISSIATION, WATTS 5.0 1000 100 10 1 0.1 0.01 .001 0 100 200 300 400 500 V(BR) BREAKDOWN VOLTAGE, VOLTS RECTRON 100 TRANSIENT VOLTAGE SUPPRESSORS 600W SERIES TVS DIODES / DO-15 ( CASE 8 ) 600W TYPE P6KE6.8 P6KE6.8A P6KE7.5 P6KE7.5A P6KE8.2 P6KE8.2A P6KE9.1 P6KE9.1A P6KE10 P6KE10A P6KE11 P6KE11A P6KE12 P6KE12A P6KE13 P6KE13A P6KE15 P6KE15A P6KE16 P6KE16A P6KE18 P6KE18A P6KE20 P6KE20A P6KE22 P6KE22A P6KE24 P6KE24A P6KE27 P6KE27A P6KE30 P6KE30A P6KE33 P6KE33A P6KE36 P6KE36A P6KE39 P6KE39A P6KE43 P6KE43A P6KE47 P6KE47A P6KE51 P6KE51A P6KE56 P6KE56A MIN. MAX. (mA) Reverse Stand off Voltage VWM (Volts) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 Breakdown Voltage VBR @IT (Volts) Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 55.6 57.1 51.3 53.1 48 49.6 43.5 44.8 40 41.4 37 38.5 34.7 35.9 31.6 33 27.3 28.3 25.5 26.7 22.6 23.8 20.6 21.7 18.8 19.6 17.3 18.1 15.3 16 13.8 14.5 12.6 13.1 11.5 12 10.6 11.1 9.7 10.1 8.8 9.3 8.2 8.6 7.5 7.8 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 RECTRON TRANSIENT VOLTAGE SUPPRESSORS 600W SERIES TVS DIODES / DO-15 ( CASE 8 ) 600W Breakdown Voltage VBR @IT (Volts) TYPE P6KE62 P6KE62A P6KE68 P6KE68A P6KE75 P6KE75A P6KE82 P6KE82A P6KE91 P6KE91A P6KE100 P6KE100A P6KE110 P6KE110A P6KE120 P6KE120A P6KE130 P6KE130A P6KE150 P6KE150A P6KE160 P6KE160A P6KE170 P6KE170A P6KE180 P6KE180A P6KE200 P6KE200A P6KE220 P6KE220A P6KE250 P6KE250A P6KE300 P6KE300A P6KE350 P6KE350A P6KE400 P6KE400A P6KE440 P6KE440A Notes : MIN. MAX. (mA) Reverse Stand off Voltage VWM (Volts) 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 332 360 380 396 418 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 Maximum Reverse Leakage at VWM ID(uA) Maximum Peak Pulse Current IPPM (Amps) Maximum Clamping Voltage at IPPM VC (Volts) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.7 7.1 6.1 6.5 5.6 5.8 5.1 5.3 4.6 4.8 4.2 4.4 3.8 3.9 3.5 3.6 3.2 3.4 2.8 2.9 2.6 2.7 2.5 2.6 2.3 2.4 2.1 2.2 1.7 1.8 1.7 1.7 1.4 1.4 1.2 1.2 1.0 1.1 0.95 1.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 1. VBR measured after IT applied for 300ms. IT = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. P6KE6.8C,P6KE440CA) electrical characteristics apply in both directions. 3. For bidirectional types having VWM of 10 volts and less, the ID Iimit is doubled. 4. All devices UL listed file# E211196. RECTRON