BRIDGE RECTIFIER - SPICE TABLES RECTRON# DB105 EDB103S RS405L RS406L RS404M RS407M RS604M RS607M MD5S 6.63E-09 6.54E-06 1.12E-07 1.12E-07 2.46E-06 2.95E-07 2.14E-07 2.14E-07 8.71E-08 0.0621 0.0182 0.01 0.01 0.0037 0.0052 0.0051 0.0051 0.0464 1.81 2.797 2 2 2.626 2.196 2.003 2.005 2.153 TT(sec) 2.89E-06 1.23E-07 1.00E-09 1.00E-09 2.89E-06 2.89E-06 2.89E-06 2.89E-06 2.89E-06 CJO(F) 4.79E-11 2.57E-11 1.06E-10 1.06E-10 2.86E-10 1.07E-10 3.90E-10 2.04E-10 2.37E-11 VJ(V) 1.582 2.088 0.4 0.4 0.25 0.694 1.045 0.292 0.866 M 0.467 0.318 0.333 0.333 0.333 0.308 0.3 0.3 0.325 EG(eV) 1.164 1.11 1.3 1.3 1.11 1.11 1.11 1.11 1.02 0.5 3 4 4 3 3 3 3 3.0254 0 0 0 0 0 0 0 0 0 IS(A) RS(ohm) N XTI KF AF 1 1 1 1 1 1 1 1 1 FC 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 BV(V) IBV(A) RECTRON# IS(A) RS(ohm) N 660 200 700 950 440 1100 440 1100 600 0.01 0.051 1.0E-06 1.0E-06 0.05 0.02 0.01 0.01 0.0022 RS201L 7.08E-09 22.1E-3 1.70 TT(sec) 4.32E-06 CJO(F) 2.92E-11 VJ(V) M EG(eV) 0.55 0.333 1.11 XTI 3 KF 0 AF 1 FC 0.5 BV(V) IBV(A) 100 5.00E-06 Reference: IS= Saturation current; RS= Ohmic resistance; N= Emission coefficient; TT= Forward transit time; CJO= zero-bias junction capacitance; VJ= Contact potential; M= Junction capacitance grading exponent; EG= Energy gap; XTI= IS temperature exponent; KF= Flicker noise coefficient; AF= Flicker noise exponent; FC= CJ forward-bias coefficient; BV= Reverse breakdown; IBV= Current at BV Note: 1) Each set of numbers only represents one diode element in the bridge.