RECTRON VR60 SEMICONDUCTOR TECHNICAL SPECIFICATION VARISTOR SILICON RECTIFIER CURRENT 0.5 Ampere FEATURES * * * * Low cost Low leakage Low forward voltage drop High current capability DO-15 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.4 gram 1.0 (25.4) MIN. .034 (0.9) DIA. .028 (0.7) .300 (7.6) .230 (5.8) .140 (3.6) .104 (2.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS DIA. 1.0 (25.4) MIN. o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL VR60 UNITS IO 0.5 Amps TJ -55 to + 150 0 C T STG -55 to + 150 0 C SYMBOL VR60 Maximum Average Forward Rectified Current at T A = 75 oC Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per element at 1.0A DC UNITS 1.5 Volts 0.5 Volts VF Minimum Forward Voltage Drop per element at 1.0mA DC Maximum Leak Current at 0.2V Forward Voltage IF 20 uAmps 2002-12 RATING AND CHARACTERISTIC CURVES ( VR60 ) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 1 - MAXIMUM NON-REPETITIVE SURGE CURRENT INSTANTANEOUS FORWARD CURRENT, (mA) 50 PEAK FORWARD SURGE CURRENT, (A) 100 40 8.3ms Single Half Sine-Wave (JEDEC Method) 30 20 10 30 10 3.0 TJ = 25 1.0 .3 .1 .03 .01 0 0 5 10 NUMBER OF CYCLES AT 60Hz 100 .3 .4 .5 .6 .7 .8 .9 1.0 INSTANTANEOUS FORWARD VOLTAGE, (V) RECTRON