FM220 FM2100 THRU

FM220
THRU
FM2100
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANG 20 to 100 Volts CURRENT 2.0 Ampere
FEATURES
*
*
*
*
*
*
Low swiching noise
Low forward voltage drop
High current capability
High speed switching
High surge capabitity
High reliability
DO-214AA
0.083 (2.11)
0.077 (1.96)
MECHANICAL DATA
* Case: Molded plastic
* Epoxy:Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position:Any
* Weight: 0.098gram
0.155 (3.94)
0.130 (3.30)
0.180 (4.57)
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.096 (2.44)
0.084 (2.13)
0.060 (1.52)
0.030 (0.76)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
0.008 (0.203)
0.004 (0.102)
0.220 (5.59)
0.205 (5.21)
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
SYMBOL
FM220 FM230 FM240 FM250 FM260 FM280 FM290 FM2100 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60
80
90
100
Maximum RMS Voltage
VRMS
14
21
28
35
42
56
63
70
Volts
Maximum DC Blocking Voltage
VDC
20
30
40
50
60
80
90
100
Volts
Volts
Maximum Average Forward Rectified Current @ T T=120oC
IO
2.0
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
I FSM
60
Amps
RθJA
40
0
CJ
130
TJ
-55 to + 125
0
C
T STG
-55 to + 150
0
C
Thermal Resistance Junction to Ambient
Total Capacitance
Operating Temperature Range
Storage Temperature Range
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 2.0A DC
Maximum Average Reverse Current
@T A = 25o C
at Rated DC Blocking Voltage
@T A = 100 oC
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 10 volts.
2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
VF
IR
Amps
pF
FM220 FM230 FM240 FM250 FM260 FM280 FM290 FM2100
0.55
0.70
C/W
0.85
UNITS
Volts
0.2
mAmps
2.0
mAmps
2006-11
AVERAGE FORWARD CURRENT, (A)
2.0
1.5
FM
250
240
0
210
-FM
-FM
220
FM
1.0
0.5
0
Single Phase Half Wave 60Hz
Resistive or Inductive Load
0.375" (9.5mm) Lead Length
0
25
50
75
100
125
150
175
INSTANTANEOUS FORWARD CURRENT, (A)
RATING AND CHARACTERISTICS CURVES ( FM220 THRU FM2100 )
20
10
TA = 25 OC
Pulse Width = 300µS
1% Duty Cycle
FM220
FM230
FM240
FM250
FM260
FM280
FM290
FM2100
1.0
0.1
0.1 0.3
O
LEAD TEMPERATURE, ( C)
100
TJ = 125 OC
1.0
0.1
TJ = 75 OC
0.01
TJ = 25 OC
0.001
0
20
40
60
FM220~FM240
80
100
120
140
200
100
80
60
40
20
1.0
4
1.3
1.5
1.7
1.9
2.1
10
1.0
TJ = 150 OC
0.1
TJ = 125 OC
0.01 T = 75 OC
J
0.001
10
40
FM250~FM260
FM280~FM2100
TJ = 25 OC
0
20
40
60
80
100
120
140
FIG.4 TYPICAL REVERSE CHARACTERISTICS
PEAK FORWARD SURGE CURRENT, (A)
CT, JUNCTION CAPACITANCE, (pF)
TJ = 25 OC
0.4
1.1
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
400
0.1
0.9
100
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
10
0.7
FIG.2 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT, (mA)
INSTANTANEOUS REVERSE CURRENT, (mA)
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
10
0.5
INSTANTANEOUS FORWARD VOLTAGE, (V)
80
REVERSE VOLTAGE, (V)
FIG.5 TYPICAL JUNCTION CAPACITANCE
60
8.3mS Single Half Sine-Wave
JEDEC Method
50
40
30
20
10
0
1
2
4
6 8 10
20
40
80 100
NUMBER OF CYCLES AT 60Hz
FIG.6 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.