RB151 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION RB157 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.5 Amperes FEATURES * * * * * High reverse voltage to 1000v Surge overload ratings to 50 amperes peak Good for printed circuit board assembly Weight: 1.04 grams Silver-plated copper leads RB-15 MECHANICAL DATA .360 (9.1) .340 (8.6) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .150 (3.8) .130 (3.3) 1.2 (30.5) MIN. POS. LEAD 1.0 (25.4) MIN. .032 (0.8) .028 (0.7) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .220 (5.6) .180 (4.6) Single phase, half wave, 60 Hz, resistive or inductive load. .220 (5.6) .180 (4.6) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL RB151 RB152 RB153 RB154 RB155 RB156 RB157 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 25o C Peak Forward Surge Current 8.3 ms single half sine-wave Volts IO 1.5 Amps I FSM 50 Amps superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Operating Temperature Range Storage Temperature Range RθJA 36 RθJC 12 0 C/ W TJ -55 to + 150 0 C T STG -55 to + 150 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridge VF Element at 1.0A DC Maximum Reverse Current at Rated @T A = 25 o C DC Blocking Voltage per element @T A = 100 o C RB151 RB152 RB153 RB154 1.0 RB155 RB156 RB157 UNITS Volts 5.0 uAmps 1 mAmps IR NOTE:1.Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length P.C.B. mounting. 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. 2005-3 REV: A RATING AND CHARACTERISTIC CURVES ( RB151 THRU RB157 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD 60 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT 50 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 1.6 1.4 1.2 1.0 .8 .6 60 Hz RESISTIVE OR INDUCTIVE LOAD .4 .2 0 0 0 2 4 6 10 20 40 60 NUMBER OF CYCLES AT 60Hz 20 100 50 80 110 140 170 AMBIENT TEMPERATURE, ( ) 200 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD FIG. 4 - TYPICAL REVERSE CHARACTERISTICS TJ = 25 Pulse Width = 300us 1% Duty Cycle MIN. MAX. 1.0 MEDIUM .1 .01 .4 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) CHARACTERISTICS 10 10 1.0 TJ = 25 0.1 .01 .6 .8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON 140