RS601 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION RS607 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES * * * * * Low leakage Low forward voltage Mounting position: Any Surge overload rating: 150 amperes peak Silver-plated copper leads RS-6 MECHANICAL DATA * Epoxy : UL flammability classification 94V-0 * UL listed under the recognized component directory,File# E94233 .935 (23.7) .895 (22.7) .15£r¡ .23L (3.8£r¡ 5.7L) HOLE THRU .300 (7.5) .700 (17.8) .600 (16.8) .780 (19.8) .740 (18.8) AC 1.00 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .220 (5.6) .180 (4.6) .140 (3.5) Ratings at 25 o C ambient temperature unless otherwise specified. .280 (7.1) .268 (6.8) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL RS601 RS602 RS603 RS604 RS605 RS606 RS607 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts RATINGS o Maximum Average Forward Rectified Output Current at Tc = 75 C IO 6.0 Amps I FSM 150 Amps Typical Thermal Resistance (NOTE 1) RθJA 28 Typical Thermal Resistance (NOTE 2) R θJC 7.5 T J, T STG -55 to + 150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load Operating and Storage Temperature Range 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per element at 6.0A DC Maximum Reverse Current at Rated @T A = 25 o C DC Blocking Voltage per element @T A = 125 o C RS601 RS602 RS603 VF RS604 RS605 RS606 RS607 Volts 5.0 uAmps 1.0 mAmps IR NOTES: 1.Thermal resistance from junction to ambient with units in free air, P.C.B. mounted on 0.5x0.5” (12x12mm) copper pads, 0.375” (9.5mm) lead length. 2.Thermal resistance from junction to case with units mounted on a 2.6x1.4x0.06” thick (6.5x3.5x.15cm) Al. Plate. 3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. UNITS 1.1 2005-3 REV: A 150 8.3ms Single Half Sine-Wave (JEDEC Method) 120 90 60 30 0 INSTANTANEOUS FORWARD CURRENT, (A) 1 2 100 TJ = 25 10 Pulse Width = 300us 1% Duty Cycle 1 .1 .6 FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE 8 7 6 5 4 3 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) 60 Hz RESISTIVE OR INDUCTIVE LOAD 2 1 0 4 6 8 10 20 40 60 80100 NUMBER OF CYCLES AT 60Hz FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS .4 AVERAGE FORWARD OUTPUT CURRENT, (A) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0 50 100 CASE TEMPERATURE, ( INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( RS601 THRU RS607 ) 150 ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 TJ = 100 1.0 .1 TJ = 25 .01 0 20 40 80 100 120 140 60 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) RECTRON