END CAPS QSEC HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING Features/Applications QSEC offers an economical means of sealing the ends of power and control cables to ensure a watertight seal. The internal surface of the end caps has a layer of Recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths. Protects against oxidation, ozone, UV radiation, etc. Operating temperature: -55°C to +110°C, 1000V Minimum shrink temperature: 120°C RoHS Compliant Protection against oxidation, ozone & UV radiation L Dw A D Ensures seal A-spiral hot melt adhesive Technical Data Property Test Method Typical Data IEC 216 -55°C to +110°C Operating Temperature Tensile Strength ASTM D 638 > 14 MPa Elongation at Break ASTM D 638 > 400% Density ASTM D 792 1.05 150°C, 168 hrs. > 300% Elongation at Break After Aging Dielectric Strength IEC 243 > 15kV/ mm Volume Resistance IEC 93 > 10 14 Ω.cm Product Dimensions Part Number As Supplied (mm) D (min) Recovered (mm) D (max) A (+ 10%) L (+ 10%) Dw (+ 5%) For Cable Diameter (mm) Standard Packaging *(QB) (Qty) Standard Length End Cap QSEC105-12/4-QB200 12 4 15 40 2.6 4-10 200 QSEC110-14/5-QB200 14 5 18 45 2.2 5-12 200 QSEC115-20/6-QB150 20 6 25 55 2.8 6-16 150 QSEC120-25/8.5-QB150 25 8.5 30 68 2.8 10-20 150 QSEC130-35/16-QB100 35 16 35 83 3.3 17-30 100 QSEC135-40/15-QB100 40 15 40 83 3.3 18-32 100 QSEC140-55/26-QB50 55 26 50 103 3.5 28-48 50 QSEC150-75/36-QB40 75 36 55 120 4.0 45-68 40 QSEC160-100/52-QB30 100 52 70 140 4.0 55-90 30 QSEC170-120/60-QB15 120 60 70 150 4.0 65-110 15 QSEC180-145/60-QB15 145 60 70 150 4.0 70-130 15 QSEC190-160/82-QB10 160 82 70 150 4.0 90-150 10 QSEC200-200/90-QB10 200 90 70 160 4.2 100-180 10 Extended Length End Cap QSEC110L-14/5-QB200 14 5 30 55 2.2 5-12 200 QSEC130L-42/15-QB100 42 15 40 110 3.3 18-34 100 QSEC140L-55/23-QB50 55 23 70 140 3.8 25-48 50 QSEC145L-62/23-QB50 62 23 70 140 3.8 25-55 50 QSEC150L-75/32-QB40 75 32 70 150 4.0 40-68 40 QSEC150XL-75/36-QB40 75 36 70 170 4.2 45-68 40 QSEC160L-105/45-QB30 105 45 65 150 4.0 50-90 30 Notes: 1. End cap with valve stem is available upon request. 2. * See Part Number Guide for standard packaging codes.. 3. Cross Reference Guide available. www.Qualtekusa.com