SGA6586Z SGA6586ZDC to 4000MHz, Cascadable SiGe HBT MMIC Amplifier DC to 4000MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-86 Product Description Features The SGA6586Z is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring one-micron emitters provides high FT and excellent thermal performance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. Only two DC-blocking capacitors, a bias resistor, and an optional RF choke are required for operation. GaAs HBT 0 ORL 16 -20 -30 Si CMOS PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite -40 0 Si BJT Return Loss (dB) Gain (dB) IRL 8 GaAs pHEMT -10 24 InGaP HBT SiGe HBT GAIN GaAs MESFET Gain & Return Loss vs. Freq. @TL=+25°C 32 Si BiCMOS High Gain: 18.4dB at 1950MHz Cascadable 50Ω Operates from Single Supply Low Thermal Resistance Package Applications Optimum Technology Matching® Applied SiGe BiCMOS 0 1 GaN HEMT 2 3 Frequency (GHz) 4 5 RF MEMS Parameter Small Signal Gain Output Power at 1dB Compression Output Third Intercept Point Min. Specification Typ. 23.8 18.4 16.7 21.5 19.0 33.8 32.2 2500 Max. Unit dB dB dB dBm dBm dBm dBm MHz Condition 850MHz 1950MHz 2400MHz 850MHz 1950MHz 850MHz 1950MHz >10dB Bandwidth Determined by Return Loss Input Return Loss 21.4 dB 1950MHz Output Return Loss 18.0 dB 1950MHz Noise Figure 3.1 dB 1950MHz Device Operating Voltage 4.5 4.9 5.3 V Device Operating Current 72 80 88 mA Thermal Resistance 97 °C/W (Junction - Lead) Test Conditions: VS =8V, ID =80mA Typ., OIP3 Tone Spacing=1MHz, POUT per tone=-5dBm, RBIAS =39Ω, TL =25°C, ZS =ZL =50Ω RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. DS100916 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 6 SGA6586Z Absolute Maximum Ratings Parameter Rating Unit Max Device Current (ID) 160 mA Max Device Voltage (VD) 7 V +16 dBm +150 °C -40 to +85 °C +150 °C Max RF Input Power Max Junction Temp (TJ) Operating Temp Range (TL) Max Storage Temp Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD <(TJ -TL)/RTH, j-l Typical Performance at Key Operating Frequencies Parameter Unit 100 MHz 500 MHz 850 MHz 1950 MHz 2400 MHz Small Signal Gain dB 25.8 23.8 18.4 Output Third Order Intercept Point dBm 32.2 33.8 32.2 Output Power at 1dB Compression dBm 20.9 21.5 18.0 Input Return Loss dB 32.2 23.3 22.8 21.4 Output Return Loss dB 16.8 18.2 23.0 18.0 Reverse Isolation dB 24.0 23.9 23.6 21.2 Noise Figure dB 2.5 2.7 3.1 Test Conditions: VS =8V, ID =80mA Typ., OIP3 Tone Spacing=1MHz, POUT per tone=-5dBm, RBIAS=39Ω, TL =25°C, ZS =ZL =50Ω OIP3 vs. Frequency P1dB vs. Frequency VD= 4.9 V, ID= 80 mA VD= 4.9 V, ID= 80 mA 40 14.4 14.2 16.6 24 22 P1dB (dBm) 35 OIP3 (dBm) 16.7 30.2 16.8 17.4 17.4 19.7 3.7 3500 MHz 30 25 20 TL=+25ºC 18 16 TL=+25ºC 20 14 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3 Noise Figure vs. Frequency VD= 4.9 V, ID= 80 mA Noise Figure (dB) 5 4 3 2 TL=+25ºC 1 0 0 2 of 6 0.5 1 1.5 2 Frequency (GHz) 2.5 3 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS100916 SGA6586Z |S | vs. Frequency |S | vs. Frequency VD= 4.9 V, ID= 10 mA (Typ.) VD= 4.9 V, ID= 80 mA 11 32 0 24 -10 S11(dB) S21(dB) 21 16 8 0 0 1 2 3 Frequency (GHz) -30 +25°C -40°C +85°C TL 4 -20 -40 5 0 1 |S | vs. Frequency VD= 4.9 V, ID= 80 mA 5 22 0 -10 S22(dB) S12(dB) 4 VD= 4.9 V, ID= 80 mA -10 -20 -30 -40 0 1 2 3 Frequency (GHz) 4 -20 -30 +25°C -40°C +85°C TL DS100916 2 3 Frequency (GHz) |S | vs. Frequency 12 0 +25°C -40°C +85°C TL +25°C -40°C +85°C TL -40 5 0 1 2 3 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 4 5 3 of 6 SGA6586Z Pin 1 2, 4 Function RF IN GND 3 RF OUT/BIAS Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as possible. RF output and bias pin. DC voltage is present on this pin, therefore a DC blocking capacitor is necessary for proper operation. Application Schematic Frequency (Mhz) VS R BIAS 1 uF CD 1000 pF LC CB RF out CB 2 500 850 1950 2400 3500 CB 220 pF 100 pF 68 pF 56 pF 39 pF CD 100 pF 68 pF 22 pF 22 pF 15 pF LC 68 nH 33 nH 22 nH 18 nH 15 nH Recommended Bias Resistor Values for ID=80mA RBIAS=( VS-VD ) / ID 4 1 SGA6586Z 3 RF in Reference Designator Supply Voltage(VS) RBIAS 6V 13 8V 39 10 V 12 V 62 91 Note: RBIAS provides DC bias stability over temperature. Evaluation Board Layout VS 1 uF RBIAS A65 CB 4 of 6 LC 1000 pF CD CB Mounting Instructions 1. Use a large ground pad area under device pins 2 and 4 with many plated through-holes as shown. 2. We recommend 1 or 2 ounce copper. Measurements for this data sheet were made on a 31 mil thick FR-4 board with 1 ounce copper on both sides. 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS100916 SGA6586Z Suggested Pad Layout Package Drawing Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. DS100916 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 5 of 6 SGA6586Z Part Identification 65Z Ordering Information Ordering Code 6 of 6 Description SGA6586Z 13" Reel with 3000 pieces SGA6586ZSQ Sample bag with 25 pieces SGA6586ZSR 7” Reel with 100 pieces SGA6586ZPCK1 850MHz, 8V Operation PCBA with 5-piece sample bag 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS100916