White High-Intensity LED Lamp (3 mm, 40° Viewing Angle) OVLAW4CB7 • • • • High luminous intensity Through-hole type Clear lens High efficiency Product Photo Here The OVLAW4CB7 is a round 3mm white high-intensity through-hole lamp with a 40° viewing angle. It is designed for wide-angle uniform light output. Applications • Indicators for medical, industrial, consumer and office equipment • Indicators for white goods and home appliances • Interior and exterior architectural and accent lighting • Signs and digital information displays, video screen non-color and RGB presentation • Automotive backlighting and indicators Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLAW4CB7 InGaN White 6200 Clear RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 06/2012 Page 1 of 6 White High-Intensity LED Lamp OVLAW4CB7 Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Reverse Voltage 5V Power Dissipation 100 mW Average Forward Current 25 mA Peak Forward Current (Duty Ratio = 1/10, Pulse Width =0.1ms) 100 mA Current Linearity vs Ambient Temperature -0.29 mA/° C LED Junction Temperature 125° C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Lead Soldering Temperature (5 seconds maximum) 260° C Electrical and Optical Characteristics (TA = 25o C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 4,360 6,200 ---- mcd IF = 20 mA 2Θ½ 50% Power Angle ---- 40 ---- deg IF = 20 mA VF Forward Voltage ---- 3.2 4.0 V IF = 20 mA IR Reverse Current ---- ---- 10 µA VR = 5 V ---- 0.31 ---- ---- IF = 20 mA ---- 0.32 ---- ---- IF = 20 mA x Chromaticity Coordinates y Standard Bins LEDs are sorted to the Luminous Intensity (IV) Forward Voltage (VF) and CCT bins listed below. Each bag consists of a single IV bin, a single VF bin and a single CCT bin. Orders are filled utilizing all of the IV, VF and CCT bins listed in the following tables. Optek will not accept orders for single IV, VF or CCT bins. VF IV Luminous Intensity Bin Min (mcd) Max (mcd) 0W 4,360 6,105 0X 6,105 8,550 0Y 8,550 11,970 Forward Voltage Bin Min Max A 2.6 2.8 B 2.8 3.0 C 3.0 3.2 D 3.2 3.4 E 3.4 3.6 F 3.6 3.8 G 3.8 4.0 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 06/2012 Page 2 of 6 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com White High-Intensity LED Lamp OVLAW4CB7 Standard Bins LEDs are sorted to the Luminous Intensity (IV) Forward Voltage (VF) and CCT bins listed below. Each bag consists of a single IV bin, a single VF bin and a single CCT bin. Orders are filled utilizing all of the IV, VF and CCT bins listed in the following tables. Optek will not accept orders for single IV, VF or CCT bins. Chromaticity Coordinates (x, y) 5A Rank Cx 5B 0.300 0.290 0.290 0.300 0.300 0.290 0.254 0.239 0.225 0.240 0.268 0.253 5C 0.290 0.300 0.300 0.290 0.239 0.254 0.283 0.268 0.290 0.300 0.253 0.268 Bin 9 Cy 5D Rank Cx 5E 5F 0.300 0.290 0.290 0.300 0.300 0.290 0.290 0.300 0.300 0.290 0.290 0.300 0.297 0.282 0.268 0.283 0.311 0.296 0.282 0.297 0.325 0.310 0.296 0.311 0.310 0.300 0.300 0.310 0.310 0.300 0.300 0.310 0.310 0.300 0.300 0.310 0.269 0.254 0.240 0.255 0.283 0.268 0.254 0.269 0.298 0.283 0.268 0.283 Bin 10 Cy 6A Rank Cx 6B 6C Bin 11 Cy 6D Rank Cx 6E 6F 0.310 0.300 0.300 0.310 0.310 0.300 0.300 0.310 0.310 0.300 0.300 0.310 0.312 0.297 0.283 0.298 0.326 0.311 0.297 0.312 0.340 0.325 0.311 0.326 Bin 12 Cy 7A Rank Cx 7B 7C 0.310 0.320 0.320 0.310 0.310 0.320 0.320 0.310 0.310 0.320 0.320 0.310 0.269 0.284 0.270 0.255 0.283 0.298 0.284 0.269 0.298 0.313 0.298 0.283 Bin 13 Cy 7D Rank Cx 7E 7F 0.310 0.320 0.320 0.310 0.310 0.320 0.320 0.310 0.310 0.320 0.320 0.310 0.312 0.327 0.313 0.298 0.326 0.341 0.327 0.312 0.340 0.355 0.341 0.326 Bin 14 Cy OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 06/2012 Page 3 of 6 White High-Intensity LED Lamp OVLAW4CB7 Typical Electro-Optical Characteristics Curves Note: The data shown above are typical curves. Every LED component may have some variations. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 06/2012 Page 4 of 6 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com White High-Intensity LED Lamp OVLAW4CB7 Beam Pattern Soldering: Soldering heat may damage the LED. Careful attention should be paid during the soldering process and PCB assembly. In order to eliminate the stress of heat shock, please solder the LEDs no closer than 3mm from the base of the epoxy bulb. Recommended Soldering Conditions: Wave Soldering Pre-heat Temperature Pre-heat Time Peak Temperature Dwell Time Manual Solder Dipping Hand Soldering by Iron 105°C Max 30 seconds Max 250°C Max 3 seconds Max 260°C Max 5 seconds Max 350°C Max 3 seconds Max Packaging: 500 pcs per bulk bag OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 06/2012 Page 5 of 6 White High-Intensity LED Lamp OVLAW4CB7 Reliability Test LED lamps are checked by reliability tests based on MIL standards. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 06/2012 Page 6 of 6 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com