Mini-Circuits Environmental Specifications ENV06 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55° to 100°C Ambient Environment Individual Model Data Sheet Storage Temperature -55° to 100° C Ambient Environment Individual Model Data Sheet Humidity 90 to 95% RH, 240 hours, 50°C MIL-STD-202, Method 103, Condition A, Except 50°C and end-point electrical test done within 12 hours Solder Reflow Heat Sn-Pb Eutetic Process: 225°C peak Pb-Free Process 245° - 250°C peak J-STD-020, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage Vibration (High Frequency) 20g peak, 10-2000 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-202, Method 204, Condition D Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-202, Method 213, Condition A ENV06 Rev: A 02/25/11 M130240 File: ENV06.pdf This document and its contents are the property of Mini-Circuits. Page: 1