Mini-Circuits Environmental Specifications ENV08T1 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -40° to 85°C Ambient Environment Individual Model Data Sheet Storage Temperature -55° to 100° C or -65° to 150° Ambient Environment Individual Model Data Sheet Thermal Shock -55° to 100°C, 100 cycles MIL-STD-202, Method 107, Condition A-3, except +100°C Mechanical Shock 1.5Kg, 0.5 ms, 5 shock pulses, Y1 direction only MIL-STD-883, Method 2002, Condition B, except Y1 direction only Vibration (Variable Frequency) 50g peak MIL-STD-883, Method 2007, Condition B Autoclave 15 psig, 100% RH, 121°C, 96 hours JESD22-A102, Condition C HAST 130°C, 85% RH, 96 hours JESD22-A110 Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage Solder Reflow Heat Sn-Pb Eutetic Process: 240°C peak Pb-Free Process: 260°C peak J-STD-020, Table 4-1, 4-2 and 5-2; Figure 5-1 Moisture Sensitivity: Level 1 Bake at 125°C for 24 hours Soak at 85°C/85% RH for 168 hours, Reflow 3 cycles at 260°C peak J-STD-020 Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25°C; terpene defluxer at 25°C; distilled water + proylene glycol monomethyl ether + MIL-STD-202, Method 215 ENV08T1 Rev: B 02/18/11 M130782 File: ENV08T1.pdf This document and its contents are the property of Mini-Circuits. Page: 1 Mini-Circuits Environmental Specifications ENV08T1 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec monoethanolamine at 63°C to 70°C ENV08T1 Rev: B 02/18/11 M130782 File: ENV08T1.pdf This document and its contents are the property of Mini-Circuits. Page: 2