Coaxial Amplifier 50Ω ZHL-2 Medium High Power 10 to 1000 MHz Features • wideband, 10 to 1000 MHz • high IP3, +38 dBm typ. • medium high power, 29 dBm min. ZHL-2X Not Recommended for New Designs Applications • VHF/UHF • cellular • instrumentation • laboratory ZHL-2 CASE STYLE: T34 ConnectorsModel SMAZHL-2-S SMAZHL-2X-S Recommended Replacement Part: ZHL-2+ ZHL-2X+ Electrical Specifications MODEL NO. FREQ. (MHz) fL 10 10 ZHL-2 ZHL-2X* GAIN (dB) fU 1000 1000 MAXIMUM POWER OUTPUT (dBm) Flatness (1 dB Compr.) Max. ±1.0 ±1.0 Min. +29 +29 Min. 16 16 * Heat sink not included Open load is not recommended, potentially can cause damage. With no load derate max input power by 20 dB Maximum Ratings Operating Temperature Storage Temperature Input (no damage) +15 +15 DYNAMIC RANGE NF (dB) IP3 (dBm) Typ. 9.0 9.0 Typ. +38 +38 VSWR (:1) Max. In 2.0 2.0 Out 2.0 2.0 DC POWER Volt (V) Nom. 24 24 Current (A) Max. 0.6 0.6 To order without heat sink, add suffix X to model number. Alternative heat sinking and heat removal must be provided by the user to limit maximum temperature to 65°C, in order to ensure proper performance. For reference, this requires thermal resistance of user’s external heat sink to be 1.35°C/W Max. -20°C to 65°C -55°C to 100°C DC Voltage +25V Max. Permanent damage may occur if any of these limits are exceeded. Outline Drawing Outline Dimensions M OUNT I NG I NF OR M A T I ON F OR M ODE L S W I T H OUT H E A T SI NK Outline Dimensions ( inch mm ) A B C 4.75 2.00 2.12 120.65 50.80 53.85 D E .19 4.375 4.83 111.13 F G .23 1.540 5.84 39.12 H J .144 .58 3.66 14.73 K L M N .34 .50 1.50 1.00 8.64 12.70 38.10 25.40 P .12 3.05 Q R S T wt .38 4.00 .30 2.60 grams* 9.65 101.60 7.62 66.04 440.0 *325 grams without heatsink Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. D M152564 ZHL-2 150827 Page 1 of 2 ZHL-2 Typical Performance Data/Curves FREQ. (MHz) GAIN (dB) 23V 24V DIRECTIVITY (dB) 24.5V 23V 24V 24.5V IN NOISE FIGURE (dB) OUT POUT at 1 dB COMPR. (dBm) 24V 24V 17.7517.7717.76 18.1218.1318.12 18.0718.0718.07 18.0018.0118.00 17.6317.6317.64 26.1026.0026.10 25.4025.5025.40 25.7025.5025.60 25.7025.8025.70 26.6026.5026.50 1.58 1.08 1.11 1.23 1.43 1.87 1.80 1.76 1.59 1.22 9.19 8.56 7.95 8.11 8.46 10 100 200 300 400 30.03 30.09 30.23 30.46 30.69 492.30 619.20 746.20 873.10 1000.00 17.4217.4217.43 17.1317.1317.12 17.1917.1917.19 17.3117.3217.31 17.8417.8317.85 27.0027.0026.90 27.4027.3027.40 26.6026.8026.70 24.9024.9024.80 21.9022.0021.80 1.54 1.65 1.71 1.70 1.39 1.09 1.20 1.20 1.15 1.26 8.54 500 8.58 600 8.69 700 9.06 800 9.69 1000 31.05 31.37 31.44 31.67 31.41 ZHL-2 DIRECTIVITY ZHL-2 VSWR 2.5 30 19.0 24V 23V 24.5V DIRECTIVITY (dB) 18.2 17.8 17.4 24V IN 24.5V 2.0 26 24 1.5 22 1.0 20 17.0 200 400 600 FREQUENCY (MHz) 800 0 1000 OUT 28 VSWR 23V 18.6 0 FREQ. (MHz) 10.00 22.60 66.80 197.60 390.80 ZHL-2 GAIN GAIN (dB) VSWR (:1) 200 400 600 800 1000 0 200 400 600 800 1000 FREQUENCY (MHz) FREQUENCY (MHz) ZHL-2 NOISE FIGURE ZHL-2 OUTPUT POWER AT 1-dB COMPRESSION 35 at 24V NOISE FIGURE (dB) OUTPUT POWER (dBm) 10.0 33 31 29 27 9.4 8.8 8.2 7.6 7.0 25 0 200 400 600 FREQUENCY (MHz) 800 1000 0 200 400 600 FREQUENCY (MHz) 800 1000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2