HIGH VOLTAGE SCHOTTKY RECTIFIERS Solid State Devices, Inc. (SSDI) is excited to release its new high voltage, low VF schottky rectifiers for the military and aerospace industries. The examples below feature 40 - 80 amp, 150 - 200 volt schottky rectifiers with TX, TXV, & S level screening available. Screening is based on MIL-PRF-19500. Screening flows are available on request. Contact us today for samples or more information about our high reliability schottky devices. SED40KB200 & SSR40G200 Series 150 - 200 Volts, 40 Amps Power Schottky Diode ▪▪ Low forward voltage drop: 0.95V max @ 40A, 25°C ▪▪ Low reverse leakage ▪▪ Hermetically sealed surface mount package ▪▪ Guard ring for overvoltage protection ▪▪ Eutectic die attach ▪▪ TX, TXV, and S level screening available Sedpack 2 (KB) Sedpack 2 with lead (KE) *also available in reverse polarity (KF) Cerpack (G) SSR40150J & SSR40200J 150 - 200 Volts, 40 Amps Schottky Rectifier ▪▪ Low forward voltage drop: 1.1V max @ 40A, 25°C ▪▪ High surge rating ▪▪ Low reverse leakage current ▪▪ Low junction capacitance ▪▪ Isolated hermetically sealed package ▪▪ Ultrasonic aluminum wire bonds ▪▪ Custom lead forming available ▪▪ TX, TXV, and S level screening available TO-257 (J) SSR80150CTM & Z thru SSR80200CTM & Z 150 - 200 Volts, 80 Amps Schottky Centertap Rectifier ▪▪ Low forward voltage drop: 1.05V max @ 40A, 25°C ▪▪ High surge rating ▪▪ Low reverse leakage current ▪▪ Low junction capacitance ▪▪ Isolated hermetically sealed package ▪▪ Ultrasonic aluminum wire bonds ▪▪ Ceramic seal for improved reliability available ▪▪ TX, TXV, and S level screening available TO-254 (M) TO-254Z (Z) Solid State Devices, Inc. ▪ 14701 Firestone Blvd. La Mirada, CA 90638 ▪ (562) 404-4474 ▪ FAX (562) 404-1773 ▪ www.ssdi-power.com SED40KB200 and SSR40G200 SERIES Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number / Ordering Information1/ SED40 SSR40 ___ ___ ___ │ │ │ │ │ │ │ └ │ │ │ │ │ └ └ 40 AMPS 200 VOLTS POWER SCHOTTKY DIODE Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level FEATURES: Voltage 150 = 150 V 200 = 200 V Package KB = Sedpack 2 KE = Sedpack 2 with Lead KF = Sedpack 2 with Lead, Reverse Polarity G = Cerpack Low Reverse Leakage Low Forward Voltage Drop Hermetically Sealed Surface Mount Package Guard Ring for Overvoltage Protection Eutectic Die Attach TX, TXV, and Space Level Screening Available. Contact Factory. MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage SED40__150, SSR40G150 SED40__200, SSR40G200 Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 100oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Case KE, KB, G KF Symbol Value Units VRRM VRWM VR 150 200 Volts IO 40 Amps IFSM 500 Amps TOP & TSTG -55 to +150 RJC 1.5 3.5 o C o C/W NOTES: 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. (KB) SEDPACK 2 (KE) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. (KF) CERPACK (G) DATA SHEET #: SH0064B DOC SED40KB200 and SSR40G200 SERIES Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol -55 25 100 125 150 Unit Instantaneous Forward Voltage Drop typical maximum (IF = 5 Amps, 300 sec Pulse) VF 750 - 670 750 560 - 520 600 480 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF = 15 Amps, 300 sec Pulse) VF 970 - 765 840 655 - 615 700 580 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF = 30 Amps, 300 sec Pulse) VF 1280 - 830 900 725 - 690 750 655 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =40 Amps, 300 sec Pulse) VF 1470 - 865 950 760 - 725 810 695 - mVolts Reverse Leakage Current (Rated VR, 300 sec pulse minimum) typical maximum IR 0.1 - 0.6 10 2.5 - mA Junction Capacitance (VR =10 VDC, TA = 25oC, f = 1 MHz) typical maximum CJ - - - pF CASE OUTLINE: SED40KB200 0.0001 0.0002 0.01 - 400 500 CASE OUTLINE: SED40KE200 CASE OUTLINE: SED40KF200 CASE OUTLINE: SSR40G200 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0064B DOC SSR40150J SSR40200J Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 40 AMPS 150 - 200 VOLTS SCHOTTKY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SSR40 __ _J_ __ __ │ └ Screening 2/ __ = Not Screened │ │ │ │ │ │ │ │ │ │ └ │ │ TX = TX Level TXV = TXV Level │ | S = S Level │ │ └ Leg Bend │ __ = Straight │ (See Figure 1) DB = Down Bend UB = Up Bend │ └ Package J = TO-257 Voltage 150 = 150V, 200 = 200V FEATURES: High Surge Rating Low Reverse Leakage Current Low Junction Capacitance Isolated Hermetically Sealed Package Ultrasonic Aluminum Wire Bonds Custom Lead Forming Available TX, TXV, and Space Level Screening Available Consult Factory2/ MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage SSR40150J SSR40200J Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC) 4/ o Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA=25 C) Operating and Storage Temperature Maximum Thermal Resistance Junction to Case Symbol Value Units VRRM VRWM VR 150 200 Volts IO 40 Amps IFSM 250 Amps RJC NOTES: 1/ For ordering information, price, operating curves, and availability - contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Recovery conditions: IF = 0.5 Amp, IR = 1.0 Amp, rec. to 0.25 Amp. 4/ Legs 2 & 3 tied together. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. o TOP & TSTG -65 to +200 DATA SHEET #: SH0065A o 2.0 C C/W TO-257 DOC SSR40150J SSR40200J Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS per leg Symbol -55 25 100 125 150 Unit Instantaneous Forward Voltage Drop typical maximum (IF =5 Amps, 300 sec Pulse) VF 775 - 700 800 590 - 550 650 500 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =15 Amps, 300 sec Pulse) VF 1000 - 830 930 720 - 680 775 640 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =25 Amps, 300 sec Pulse) VF 1300 - 900 1000 790 - 750 830 710 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =40 Amps, 300 sec Pulse) VF 1550 - 1000 1100 890 - 850 940 810 - mVolts Reverse Leakage Current (Rated VR, 300 sec pulse minimum) typical maximum IR 0.1 - 0.6 10 2.5 - mA Junction Capacitance (VR =10 VDC, TA = 25oC, f = 1 MHz) typical maximum CJ - - - pF 0.0001 0.0002 0.01 - 400 500 Case Outline: TO-257 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0065A DOC SSR80150CTM&Z thru SSR80200CTM&Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 80 AMP, 150 - 200 VOLTS SCHOTTKY CENTERTAP RECTIFIER Part Number/Ordering Information 1/ SSR80 __ __ __ __ __ 2/ __ = Not Screened │ │ │ └ Screening │ TX = TX Level │ │ │ │ TXV = TXV Level │ │ │ │ S = S Level │ │ │ │ │ │ └ Lead Options │ __= Straight Leads │ │ │ DB = Down Bent UB = Up Bent │ │ │ │ └ │ Package M = TO-254 │ │ Z = TO-254Z │ │ │ └ Configuration CT = Common Cathode CA = Common Anode │ D = Doubler │ DR = Doubler Reverse │ └ Family/Voltage 150 = 150V FEATURES: High Surge Rating Low Reverse Leakage Current Low Junction Capacitance Isolated Hermetically Sealed Package Ultrasonic Aluminum Wire Bonds Ceramic Seal for Improved Reliability Available TX, TXV, or Space Level Screening Available2/ 200 = 200V Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage SDR80150_ SDR80200_ Average Rectified Forward Current 3/ (Resistive Load, 60 Hz Sine Wave, TC= 100ºC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA= 25ºC, per leg) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case, each individual diode Junction to Case 3/ NOTES: 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request.. 3/ Both legs tied together. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Symbol Value Units VRRM VRWM VR 150 200 Volts IO 80 Amps IFSM 250 Amps TOP & TSTG -65 to +200 ºC RθJC 2.0 1.4 ºC/W TO-254 DATA SHEET #: SH0066B TO-254Z DOC SSR80150CTM&Z thru SSR80200CTM&Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS per leg Symbol -55 25 100 125 150 Unit Instantaneous Forward Voltage Drop typical maximum (IF =5 Amps, 300 sec Pulse) VF 765 - 690 790 575 - 540 650 490 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =15 Amps, 300 sec Pulse) VF 980 - 815 900 720 - 680 750 650 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =25 Amps, 300 sec Pulse) VF 1300 - 900 960 825 - 790 850 760 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =40 Amps, 300 sec Pulse) VF 1500 - 1000 1050 960 - 940 1000 920 - mVolts Reverse Leakage Current (Rated VR, 300 sec pulse minimum) typical maximum IR 0.0001 - 0.001 0.01 0.5 - 2 10 10 - mA Junction Capacitance (VR =10 VDC, TA = 25oC, f = 1 MHz) typical maximum CJ - 400 500 - - - pF TO-254 TO-254Z Optional Lead Bent Configuration Down Bent (DB Suffix) Up Bent (UB Suffix) Code Pin Assignment Function Pin 1 Pin 2 Pin 3 CT Common Cathode Anode Cathode Anode CA Common Anode Cathode Anode Cathode D Doubler Cathode AC Anode DR Doubler, Reverse Anode AC Cathode For information on curves, contact the Factory Representative for Engineering Assistance. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0066B DOC