SSR8045CTS1 and SSR8045CTS2 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ 80 Amp SCHOTTKY CENTERTAP RECTIFIER SSR8045 CT S1 TX │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ │ │ └ Package: S1 = SMD1 │ S2 = SMD2 │ │ │ └ Configuration: CT = Common Cathode 45 Volts Features: • • • • Low Reverse Leakage Low Forward Voltage Drop Guard Ring for Overload Protection Also available in TO-258 and TO-259 Versions • 175ºC Operating Temperature • TX, TXV, and S Level Screening Available Maximum Ratings Symbol Value Units VRRM VRSM VR 45 Volts Io 80 Amps IFSM 1200 Amps TOP & TSTG -65 to +175 ºC RθJE 0.5 1.0 ºC/W Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current 3/ (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current 3/ (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) Operating & Storage Temperature Maximum Thermal Resistance Junction to Case Total Per Leg Notes: SMD1 (S1) SMD2 (S2) 1/ For ordering information, price, operating curves, and availability - Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Maximum electrical rating shown for centertap configurations both legs tied together. 4/ All electrical characteristics per leg @25ºC, unless otherwise specified. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0052A DOC SSR8045CTS1 and SSR8045CTS2 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic 4/ Instantaneous Forward Voltage Drop (TA = 25ºC, 300 – 500usec Pulse) Instantaneous Forward Voltage Drop (TA = -55ºC, 300 – 500usec Pulse) Reverse Leakage Current (100% of rated VR, 300µs pulse min.) Symbol Min Max Units IF = 10A IF = 20A IF = 40A VF1 VF2 VF3 –– –– –– 0.53 0.65 0.90 VDC IF = 20A VF4 –– 0.72 VDC TA = 25ºC TA = 100ºC IR1 IR2 –– –– 400 30 µA mA CJ –– 1600 pF Junction Capacitance (VR=10VDC, TA=25ºC, f=1MHz) SMD1 Outline: Available Part Numbers: SSR8045CTS1, SSR8045CTS2 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. SMD2 Outline: PIN ASSIGNMENT: SMD1 SMD2 Pin 2 Pin 2 Pin 1 Pin 1 Pin 3 Pin 3 Common Cathode (CT) Anode Cathode Anode DATA SHEET #: SH0052A DOC