Products for Wineries (Catalog)

PRODUCTS FOR WINERIES
Products for the wine-making industry
Products for wineries
INDEX
ISOLATORS-HD Series
Non-fusible motor disconnect switches
pg.16
2
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
EUREKA-HD Series
Pin and sleeve devices
pg.10
ADVANCE-GRP System
Switched interlocked
socket outlets
pg.4
3
ADVANCE-GRP System
[
]
SWITCHED INTERLOCKED SOCKET OUTLETS
REFERENCE STANDARDS
EN 60309-1
Plugs, socket outlets and couplers for industrial purposes.
Part 1: general requirements.
EN 60309-4
Plugs, socket-outlets and couplers for industrial purposes.
Part 4: Switched socket-outlets and connectors with or without interlock.
UL 1682
Plugs, receptacles and cable
connectors of the pin and sleeve type.
UL 1686
Standard for pin and sleeve configuration.
EN 60947-3
VERSIONS WITH MECHANICAL INTERLOCK
Low voltage switchgear and controlgear.
Part 3: switches, disconnectors, switch-disconnectors
and fuse-combination unit.
With switch-disconnector
UL 508 (NON-FUSED)
Industrial control equipement.
With MCB circuit breaker
TECHNICAL CHARACTERISTICS
4
Rated current:
20A-30A-60A
Rated voltage:
100÷600V~
Frequency:
50÷60Hz
Insulating voltage:
500/690V~
Protection degree:
IP67
(equivalent to 3R, 4/4X, 12K)
Operating temperature according
to the reference standard:
-25°C +40°C
Minimum operating temperature:
-40°C
Max. operating temperature:
+60°C
Self-extinguishing GW test:
960°C
Self-extinguishing UL94:
V0
Material:
Thermosettting
IK degree at 20°C:
IK10 (20J)
Manual motor controller
20A-30A-60A:
COMMAND Series
Colour:
Grey RAL7037
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
TERMINAL TORQUE
20/30A
60A
20/30A
60A
Switch
0.8 Nm (7 lb•in)
3.6 Nm (32 lb•in)
Ground / neutral
0.8 Nm (7 lb•in)
1.5 Nm (13 lb•in)
Auxilary contact
0.8 Nm (7 lb•in)
0.8 Nm (7 lb•in)
Pilot
_
0.8 Nm (7 lb•in)
Switch / ground / neutral 8-16 AWG (1.5÷10mm2) 2-10AWG (2.5÷25mm2)
Auxiliary contact
10-18 AWG (2.5÷1mm2) 12-20AWG (2.5÷1mm2)
Pilot
-
2
10-18AWG (2.5÷1mm )
TECHNICAL DATA MINIATURE CIRCUIT BREAKERS
AMP (A)
Voltage (V)
Short circuit rating
(kA)
Rated current
(A)
Ø D (mm)
20
480Y/277V
14
20/30
5
10
30
480Y/277V
10
60
6,3
10
ØD
Fulfill UL 498 CSA C22.2 N°5 and IEC 60947-2. For use in application
for which UL 1077 or CSA C22.2 N°235 are also allowed.
TECHNICAL DATA SWITCH DISCONNECTORS (UL 508)
Rated insulation voltage Ui
20A
30A
60A
Vac
690
690
690
Vdc
400
400
-
Rated impulse withstand voltage Uimp
kV
4
4
8
Thermal current Ith
A
30
40
63
A
30
40
63
600V
A
30
32
63
120V
Hp
1,5
2
3
240V
Hp
3
5
10
240V
Hp
7,5
10
25
480V
Hp
10
15
20
600V
Hp
15
20
30
1,5-10
1,5-10
10-35
Thermal current Ithe
Short circuit
ratings
Field wiring
size
Hp ratings
General applications - Single-phase and Three-phase
AC motor, all-pole interruption - Single-phase
AC motor, B, C, D, all-pole interruption - Three-phase
mm2
Flexible wire
AWG
16-8
16-8
10-2
mm2
1,5-16
1,5-16
10-35
AWG
16-8
16-8
10-2
Fuse class RK5 (time-delay)
(A) rms
5000
5000
5000
Fuse class J (fast-acting)
(A) rms
10000
10000
10000
Rigid wire
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
5
Products for wineries
TERMINAL CAPACITY
ADVANCE-GRP System
[
]
SPECIAL CHARACTERISTICS
ADVANCE-GRP CHARACTERISTICS
The ADVANCE-GRP product line includes a series of 20A, 30A, 60A interlocked sockets (compliant with EN60309-4 standards)
and the casings to contain them. It's the most complete range of interlocked sockets produced in GRP (Glass Reinforced Polyester)
thermosetting material.
A unique feature which enhances the exceptional mechanical strength of ADVANCE-GRP products is the SMC (Sheet Moulding
Compound) production process used for the casings.
SMC is a technology which uses exclusively non-woven sheets, pre-impregnated with polyester resin. This method consists in preparing
the sheet material inside a mould which, equipped with a negative mould, presses the composite so as to allow compaction.
SMC is an advanced technology which enhances the quality of the raw material without reducing the high-strength characteristics during
transformation; it's a high-performing technology in terms of the mechanical performance of the resultant product (glass fibre length,
homogeneity of the material, integrity of the fibres).
On the contrary, the BMC (Bulk Moulding Compound) technology is a technology for moulding composite materials which uses a
raw material available in "blocks" (short, charged fibres) which are subjected to high thermomechanical stress during the
transformation process, consequently diminishing the mechanical properties of the details, thereby reducing the impact strength
and flexural strength.
The glass-fibre reinforced polyester used in ADVANCE-GRP guarantees excellent mechanical strength and a long lifetime: this
material is highly resistant to contamination, completely corrosion resistant and suited for applications requiring the use of components
with low smoke emission and no halogens, LSOH (Low Smoke Zero Halogen) components. The outstanding properties of the
material are also guaranteed over time, thanks to the high RTI value (Relative Temperature Index), measured to be 20,000h.
Numerous verifications and tests have been carried out, even UV resistance tests, in order to guarantee the long duration of the
material's initial performance.
The thickness of the walls is sufficient to offer an excellent alternative to
aluminium, stainless
steel or cast iron.
TECHNICAL
CHARACTERISTICS
Xxxx
Xxxxxx
Frequenza di impiego:
50Hz
Tensione d’isolamento:
500/690V~
Grado di protezione:
IP20-IP44-IP66
Temperatura di impiego
secondo norma di riferimento: -25°C +40°C
Massima temperatura
di funzionamento:
60°C
OUTSTANDING HEAT AND FIRE RESISTANCE
Autoestinguenza GW test:
650°C - 750°C - 850°C
The glass-fibre reinforced polyester used in ADVANCE-GRP guarantees excellent heat and fire resistance: it does not propagate
Materiale:
Tecnopolimero
flames, emit halogens or smoke.
This material has outstanding flame retardancy: Glow Wire 960°C according
EN 60695-2-1; V0 according
to UL94. It's suited for
Grado IK to
a 20°C:
IK06 - IK09
applications requiring the use of components with low smoke emission and no halogens, LSOH (Low Smoke Zero Halogen).
OUTSTANDING IMPACT RESISTANCE
The glass-fibre reinforced polyester used in ADVANCE GRP and the high thickness of the casing walls guarantee an excellent
mechanical resistance to impacts.
The SMC technology used to produce the casings makes ADVANCE-GRP an indestructible product. The impact resistance of
the casings is higher than 20J (IK10) according to EN50102, even under limit temperature conditions (-40°C +60°C).
RESISTANCE TO CHEMICAL AGENTS
The ADVANCE-GRP interlocked sockets and casings, thanks to the glass-fibre reinforced polyester with which they are produced,
have excellent resistance to aggressive chemical substances, saline solutions, diluted acids, hydrocarbons, mineral oils, alcoholic
substances. They are ideal for use in highly corrosive atmospheres.
RESISTANCE TO ATMOSPHERIC AGENTS
The structure and materials used also make ADVANCE-GRP a product suited for the most extreme environmental conditions.
Degree of protection IP67 (equivalent to 3R, 4X, 12K) guarantees an excellent seal against the entry of solid objects or liquids into
the casings. Outstanding resistance to UV radiation, exceptional reliability under environmental stress and use at both low and high
ambient temperatures (-40°C +60°C)
6
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
TECHNICAL CHARACTERISTICS 20A-30A-60A VERSIONS
Single-piece
waterproof gasket
High-strength
material with superior
UV and chemical
resistance
Lockable handle
to meet OSHA
lockout/tagout
regolation
Fuse inspection
door, tamper-proof,
lockable, with
assisted opening
TECHNICAL CHACover entirely
separate from
Corrente
the base nominale:
for easy
16A-32A
installation
Frequenza di impiego:
50Hz
Dual mechanical
lock to increase
safety
Tensione
d’isolamento:
Captive stainless
500/690V~
steel closing
screwsdi protezione:
Grado
IP20-IP44-IP66
Temperatura di impiego
secondo norma di riferimento: -25°C +40°C
Massima temperatura
di funzionamento:
60°C
Autoestinguenza GW test:
650°C - 750°C - 850°C
Indicator light
LIGHT ON
- socket powered;
LIGHT OFF
- socket not powered.
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
7
ADVANCE-GRP System
[
]
TECHNICAL CHARACTERISTICS
INTERLOCKED SOCKET WITH SWITCH DISCONNECTOR - 20-30-60A
INTERLOCKED SOCKET WITH MCB - 20-30A
Pre-wired grounding
plate connects
to metal conduit
grounding system
Outdoor wall
fastening
MCB circuit breaker
EN/IEC 60947-2
UL 489 CSA C22.2
No.5-02
480Y/277V~ 10kA
Ample space
or easy wiring
Neutral terminal
Threaded metal
insert
Earth terminal
Easily extractable
support
Indicator light
Possibility for
plug-inserted control
microswitch assembly
Prewired receptacle
accepts all
manufacturer’s IEC
60309-2 plugs
TOP VIEW
BOTTOM VIEW
Module in
high-temperature
resistant engineering
polymer
(A)
Conduit
tub
20/30
1”
60
1 1/4”
Possible entry from bottom side
8
Self-centering punch marks to facilitate drilling
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
MOUNTING INSTRUCTION
Base wall fixing
Cable
entries
1
TOP
BACK
2
3
BOTTOM
Insert fixing
Enclosure
closing
1
1
1
2
2
2
Reinstall
the cover
Wiring
diagram
Fig.W1
X
1
Y
Fig.W2
Z
G
GROUNDING
(BONDING)
PLATE
X
Y
Z
W G
L1
L2 L3
N G
GROUNDING
(BONDING)
PLATE
L1
G
L2 L3
T1 T2 T3
GREEN/
YELLOW
G
GROUND
BUSS
(GREEN/
YELLOW)
L3
T1 T2 T3
NEUTRAL
BUSS
(BLUE)
GREEN/
YELLOW
L2
2
G
L3
L1
GROUND
BUSS
(GREEN/
YELLOW)
N
L2
L1
Pilot contact
(if installed)
3 POLES 4 WIRES
4 POLES 5 WIRES
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
9
EUREKA-HD Series
REFERENCE STANDARDS
PIN AND SLEEVE DEVICES
IEC 60309-1
Plugs, socket-outlets and couplers for industrial purposes.
Part 1: general requirements.
IEC 60309-2
Plugs, socket-outlets and couplers for industrial purposes
Part 2: dimensional interchangeability requirements for pin
and contact-tube accessories of harmonised configurations.
UL 1682
Plugs, receptacles and cable
connectors of the pin and sleeve type.
UL 1686
Standard for pin and sleeve configuration.
VERSIONS
Plugs and connectors
QUALITY MARKS
UL LISTED:
E238171, E238172
Appliance inlets
UL CLASSIFIED:
E238170
For specific quality marks please contact our technical service.
TECHNICAL CHARACTERISTICS FOR PIN & SLEEVE
Receptacle
Rated current:
16A - 32A - 63A - 125A (SERIES I)
Rated voltage:
100÷690V~
Frequency:
D.C. - 50÷500Hz
Insulating voltage:
500/690V~
20A - 30A - 60A - 100A (SERIES II)
Accessories Back Box
Protection degree
(IEC 60529):
TECHNICAL CHARACTERISTICS FOR BACK BOX
IP67
Operating temperature
according to the
Protection degree (IEC 60529):
IP66/IP67
reference standard:
Operating temperature:
-25°C +40°C
Max. operating temperature: +70°C
Max. operating temperature:
+70°C
Self-extinguishing
Self-extinguishing (IEC 60695-2-I):
GW test 850°C
(IEC 60695-2-I):
GW test 650°C / 850°C
Self-extinguishing (UL94):
V2 (3,2mm)
Self-extinguishing (UL94):
V1 (3mm)
Material:
Polyamide 6
Material:
VALOX®
IK degree at 20°C (EN 50102):
IK10 (20J)
IK degree at 20°C (EN 50102): IK10 (20J)
10
-25°C + 40°C
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Cross-section of connectable conductors (awg/mm2)
Rated current
Series I
Plugs, connectors
and appliance inlets
awg
Receptacle
Max
Min
Series II
mm2 awg
Cord grip range (Plugs and connectors)
Max
Min
mm2 awg
Rated current
mm2 awg
Series I
Outside Ø mm
Max
Min
Series II
mm2
awg
mm2
awg
mm2
16A
20A
16
1
12
2,5
16
1,5
12
4
16A
20A
,570
14
,710
18
32A
30A
14
2,5
10
6
14
2,5
8
10
32A
30A
,675
17
,910
23
63A
60A
10
6
6
16
10
6
4
25
63A
60A
,937
24
1,375
35
125A
100A
6
16
2
50
4
25
0
70
125A
100A
1,265
32
1,790
45
APPLICATION EXAMPLES
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
11
Products for wineries
WIRING AND INSTALLATION
EUREKA-HD Series
PERFORMANCE - ELECTRICAL (SERIES I)
Dielectric Voltage
3000 Volts for 1 minute per IEC
Withstand:
60309-1, Clause 19
Maximum Working Voltage: 690VAC/250 VDC (minimum creepage
and clearances per IEC)
Current Interrupting/
Tested to 125% rated current at 110%
Load Breaking:
rated voltage per IEC309-1 clause 20
Temperature Rise:
Maximum 50°C rise at rated current
per IEC309-1 Clause 22, Table 8
Endurance with Load:
16 Amp: 5000 cycles; Load only
Per IEC 60309-1 Clause 21: 32 Amp: 1000 cycles - Alternating load
63 Amp: 1000 cycles - Alternating load
125 Amp: 250 cycles - Alternating load
PERFORMANCE - ELECTRICAL (SERIES II)
Dielectric Voltage Withstand: 3000 Volts for 1 minute (fixed devices)
2200 Volts for 1 minute (portable devices)
Maximum Working Voltage: 600VAC/250 VDC (minimum creepage and
clearances per UL 840)
Current Interrupting/
Tested to 150% of full rated current
Load Breaking:
for circuit interrupting
Temperature Rise:
Maximum 30°C rise at full rated current
after 50 cycles overload at 150% rated
load at 0.75-pf
Horsepower Ratings:
Per Nec 430-151b reference for
non-interrupting ratings
Endurance with Load:
20 Amp: 5000 cycles; Load only
Per IEC 60309-1 Clause 21: 30 Amp: 1000 cycles - Alternating load
60 Amp: 1000 cycles - Alternating load
100 Amp: 250 cycles - Alternating load
MATERIALS FOR PIN & SLEEVE (SERIES I & II)
Housing:
Contact Carriers:
Cable Gland Nut:
Cable Bushing:
O-Ring, Seals & Gaskets:
Pins & Sleeves:
Sleeve Force Ring:
Terminal Screws:
Flap/Screw Cover Springs:
SNAP-ON Spring:
Mounting Flanges:
Valox®
Valox®
Valox®
Solid neoprene, onion ring type
Solid neoprene
Nickel plated brass
Zinc plated steel
Nickel plated steel
Stainless steel
Stainless steel
Valox®
Standard Interface / World Ready
Full International Compliances
EN 60309
UL Classification to IEC 60309-1 and IEC 60309-2.
cULus Listing: UL 1682/1686 and CSA C22.2
No. 182.1.
CE conforms to EC Low Voltage Directive.
12
PERFORMANCE - MECHANICAL (SERIES I)
Cold (-25°C) Impact
Per IEC 60309-1 Clause 24;
Resistance:
(-25°C) with 75cm drop
Cable O.D. Accommodation: Round portable service cords from
14.5mm O.D. through 50mm O.D.
Terminal Identification:
In accordance with IEC 60309-1
standards; as L1-L2-L3-N-G
Cable Pull-Out Force:
In accordance with IEC 60309-1, Clause 23
PERFORMANCE - MECHANICAL (SERIES II)
Cold (-25°C) Impact
Per UL 1682 Section 34 and IEC 60309-1
Resistance:
Clause 24
Cable O.D. Accommodation: Round portable service cord from 0.57”
O.D. through 1.79” O.D.
Terminal Identification:
In accordance with UL 1682 standards
and IEC 60390-1: as L1-L2-L3-N-G
Cable Pull-Out Force:
Per UL 1682 Section 33 and IEC 60309-1
Clause 23
PERFORMANCE - ENVIRONMENTAL (SERIES I & II)
Corrosion Resistance:
All metallic components stainless steel or
nickel plated brass
Sleeve pressure rings of zinc plated steel
MATERIALS FOR BACK BOX (SERIES I & II)
Housing:
Gasket:
Screws:
Grounding plate:
Polyamide 6
Solid neoprene
Stainless steel
2 inch plated steel
North American and Global Voltage
Polarization “clock positions” available in all standard ratings.
Solid, Safe Voltage Selections
One-Piece contact carriers with Full-Color IEC
standard voltage-phasing Coding ensures
correct product application every time.
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
CLOCK POSITION - NORTH AMERICAN RATINGS
RATED VOLTAGE
COLOUR
USAGE (NORTH AMERICAN)
110-130V
North American
208-250V
North American
380-415V
Europe
600V +
North American and Europe (500V)
277/480V
North American
277V
North American
125/250V
North American
250/440V
Latin America
220/440V
Europe
57/130V
Europe
12h
11h
1h
4P 5W
125/250V
10h
2h
3P 4W
2P 3W
9h
3Ø
120/208
3Ø
250V
380
50 Hz
440
60 Hz
>50V
250 DC
380
415
220/380
50 Hz
250/440
60 Hz
3h
250V
480V
8h
250V
3Ø 480V
For eu
countries are
black colour
57/100
75/130
3Ø 600V
380V
415V
3Ø
277/480V
100
130
277V
60 Hz
4h
3Ø Y347/600V
200/346
240/415
7h
5h
6h
CATALOG NUMBERING SYSTEM
SCM 430P9W
Suffixes: Construction Options
Internal Protection
IP67 = Watertight = W / IP44 = Splashproof=S
Clock position / Voltage
9 = “9h” Clock Hour = 250 VAC, 3 phase
Plug, Connector, Receptacle, Inlet B, Mechanical interlocked receptacle
Amperage: 20, 30, 60, 100A or EURO 16, 32, 63, 125A
Wires: 2P3W, 3P4W, 4P5W
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
13
EUREKA-HD Series
WATERTIGHT - IP67
No Tools, No Screws Necessary
Snap-on locking handle saves 75% on
assembly time.
Unique Snap-on assembly feature on
16A, 20A, 30A and 32A Amp plugs and
connectors makes installation and inspection fast and reliable.
Captive gaskets in handles seal out water,
chemicals and dust.
IP67
Watertight design and construction meet stringent IP67 internal
protection standards.
Rugged thermoplastic housings resist impact or abuse and provide excellent corrosion resistance.
Unique Scame strain relief grip and sealing system assure superior cable retention and watertight conductor termination.
Ideal for outdoor, wet marine and washdown applications.
Unique 75% faster assembly with Snap-on handle locking, and
cable grip system.
Easy Action Single-Wiring Point Access
Saves Time Wiring
All terminal screws face in same direction
allowing installer to make safe and secure
conductor terminations in 30% less time
than other devices. Rugged, corrosion free
thermoplastic housings are colour-coded
for safe reliable connections to all other
mating type /polarizations, with raised
earth terminal standard.
Simple Cable Clamping
Threaded cable gland on 16/32A and
20/30A devices makes assembly fast and
easy.
One-piece lock screw verifies clamp locking hold, with no external metal contact
possible (16/32A and 20/30A devices).
Unique and Quick
One-piece cable gland with locking screw
loads to cable followed by cable grip 6-Finger cable clamp/grip piece.
Watertight onion ring bushing fits a wide
variety of outside diameters.
Watertight and cable
Grip Safety
Grip cable flexible 6-Finger clamp teeth
holds well beyond all agency test pullout
forces.
No internal clamps required.
Available in all amperages.
The Performance Connection
Watertight spring-loaded covers with highstrength flex-hinge screw covers on IP67
devices.
Flap covers on IP44 splashproof styles.
Safety, performance and durability for all
EN 60309 applications worldwide.
14
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
Safe Connections Standard
- Heart contacts make first,
break last for safe connections even under load
The Easy Way
- Spring clip connection locking
feature on all 16/32A and 20/30A
plugs and connectors
75% Faster Cable builds
- Nylon lock screw System
- One-piece cable gland
- Nylon locking screw prevents loosening
- Hand assembly of cable gland, cable grip
- 6 Finger clamp and onion-ring bushing
Screw Collars Stay Put
- Turreted grip allows for easy handling
Combination Flap/Screw Cover
- Integral neoprene gasket for IP67
(Watertight protection)
- Unique flex hinge design
Neoprene Cable Bushing
- Onion ring design
- Universal fit capability
Solid Neoprene
Gasket In Handle
Cable grip 6-Finger Clamp
- Provides superior cable retention
Secure Grip Handle
- Tapered shoulder (16/32A and 20/30A)
- Ribbed (60/100A and 63/125A)
Safe Connections Standard
- Earth contacts make first,
break last for safe connections
even under load
Fast and Easy Wiring
- Unique, one-way terminal
access
- Clearly marked terminal
connections
Double Secure Wiring
- Dual, combination point
terminal screw for failsafe
connections
Grounding terminals
Ground plate
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
15
ISOLATORS-HD Series
]
[
NON-FUSIBLE MOTOR DISCONNECT
SWITCHES 20-40A
REFERENCE STANDARDS
EN 60947-3
Low voltage switchgear and controlgear.
Part 3: switches, disconnectors, switch-disconnectors
and fuse-combination unit.
EN 60529
Degrees of protection provided by enclosure.
UL 508 (NON-FUSED)
Industrial control equipement.
VERSION
Suitable as motor disconnect
per 2002 NEC article
430-109 (2) (b)
Surface mounting
OUTSTANDING HEAT AND FIRE RESISTANCE
The technopolymer used for Heavy Duty Isolators guarantees an
excellent heat and fire resistance: Glow Wire 960°C according to
EN 60695-2-1; 5VA according to UL94.
OUTSTANDING IMPACT RESISTANCE
This material guarantees an excellent mechanical resistance to impacts. The impact resistance of the casings is higher than 20J (IK10)
according to EN50102, even under limit temperature conditions (40°C +60°C).
RESISTANCE TO ATMOSPHERIC AGENTS
The structure and materials used also make HD ISOLATOR a product suited for the most extreme environmental conditions.The special silicon gasket and the IP65 degree guarantees an excellent seal
against the entry of solid objects or liquids into the casings even
after a long term installation.
Outstanding resistance to UV radiation, exceptional reliability under
environmental stress and use at both low and high ambient temperatures (-40°C +60°C).
16
TECHNICAL CHARACTERISTICS
Polarity:
3P
Rated current:
20A-30A-40A
Protection degree:
IP66
(equivalent to 3R, 4/4X, 12K)
Operating temperature
according to the
reference standard:
-5°C +40°C
Min-Max. operating
temperature:
-40°C +60°C
Material:
High performance
engineering plastic
IK degree:
IK10
Glow wire test:
960°C
Self extinguishing UL94:
5VA
Colour:
Grey RAL7004
3P+N with late break early make neutral pole.
Padlockable handle.
Equipped with door locking.
In-house endurance testing 10.000 electrical cycles / 20.000 mechanical
cycles.
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
TERMINAL CAPACITY
TERMINAL TORQUE
20/40A
20/40A
Switch
8÷16 AWG (1.5÷10 mm2)
Switch
0,8 Nm (7 lb•in)
Ground
10÷18 AWG (1÷4 mm2)
Ground
0,8 Nm (7 lb•in)
Neutral
8÷16 AWG
Neutral
0,8 Nm (7 lb•in)
Auxiliary contact
12÷18 AWG (1÷2.5 mm2)
Auxiliary contact
0,8 Nm (7 lb•in)
Isolators series of enclosed manual motor controllers are rotary
operated, 3 pole, 600V Hp rated switches, housed in thermoplastic/polycarbonate or sheet steel enclosures.
They are suitable for wet and corrosive environments.
Disconnect means
Short Circuit protective device
Plastic enclosed manual motor controllers
- UL/NEMA 3R/12 and NEMA 4X versions
- Standard black handle, selector or pistol type
Controller
ISOLATORS-HD products are properly installed on the load side
of a branch circuit protective device and are suitable for use as
motor disconnects as illustrated in figure.
Overloads protections
Motor disconnect
(OSHA Lock Out/Tag Out)
M
TECHNICAL DATA SWITCH DISCONNECTORS (UL 508)
Rated insulation voltage Ui
20A
30A
40A
Vac
690
690
690
Vdc
400
400
400
Rated impulse withstand voltage Uimp
kV
4
4
4
Thermal current Ith
A
20
30
40
Thermal current Ithe
A
20
30
40
600V
A
20
30
40
120V
Hp
1,5
1,5
2
240V
Hp
2.5
3
5
240V
Hp
5
7,5
10
480V
Hp
7.5
10
15
600V
Hp
10
15
20
mm2
1,5-10
1,5-10
1,5-10
AWG
16-8
16-8
16-8
mm2
1,5-16
1,5-16
1,5-16
AWG
16-8
16-8
16-8
Fuse class RK5 (time-delay)
(A) rms
5000
5000
5000
Fuse class J (fast-acting)
(A) rms
10000
10000
10000
Short circuit
ratings
Field wiring
size
Hp ratings
General applications - Single-phase and Three-phase
AC motor, all-pole interruption - Single-phase
AC motor, B, C, D, all-pole interruption - Three-phase
Flexible wire
Rigid wire
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
17
Industrial plugs and sockets
WATERTIGHT AND SPLASHPROOF PIN AND SLEEVE DEVICES IP67
EUREKA-HD Series
UL LISTED
E238171, E238172
A
Configuration
Clock
position
Voltage/
Colour
Coding
Plug
Connector
Receptacle
Inlet
3P 4W
7h
3Ø480
SCM420P7W
SCM420C7W
SCM420R7W
SCM420B7W
4P 5W
7h
3ØY277/480
SCM520P7W
SCM520C7W
SCM520R7W
SCM520B7W
3P 4W
7h
3Ø480
SCM430P7W
SCM430C7W
SCM430R7W
SCM430B7W
4P 5W
7h
3ØY277/480
SCM530P7W
SCM530C7W
SCM530R7W
SCM530B7W
3P 4W
7h
3Ø480
SCM460P7W
SCM460C7W
SCM460R7W
SCM460B7W
4P 5W
7h
3ØY277/480
SCM560P7W
SCM560C7W
SCM560R7W
SCM560B7W
Poles
&
Wires
Receptacle/
Connector
Plug/
Inlet
20
30
60
APPLICATION EXAMPLES
18
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
ADVANCE-GRP System
A
Configuration
Clock
position
Voltage/
Colour
Coding
Interlocked
Interlocked
with MCB
3P 4W
7h
3Ø480
SCM420MI7W
SCM420MI7W-M
SCM420MI7W-NB SCM420MI7W-NBM
4P 5W
7h
3ØY277/480
SCM520MI7W
SCM520MI7W-M
SCM520MI7W-NB SCM520MI7W-NBM
3P 4W
7h
3Ø480
SCM430MI7W
SCM430MI7W-M
SCM430MI7W-NB SCM430MI7W-NBM
4P 5W
7h
3ØY277/480
SCM530MI7W
SCM530MI7W-M
SCM530MI7W-NB SCM530MI7W-NBM
3P 4W
7h
3Ø480
SCM460MI7W
SCM460MI7W-M
SCM460MI7W-NB SCM460MI7W-NBM
4P 5W
7h
3ØY277/480
SCM560MI7W
SCM560MI7W-M
SCM560MI7W-NB SCM560MI7W-NBM
Poles
&
Wires
Receptacle/
Connector
Plug/
Inlet
Interlocked
without base (*)
Interlocked
without base
with MCB (*)
20
30
60
(*) Select bases in the next page of the catalogue.
APPLICATION EXAMPLES
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
19
Products for wineries
INTERLOCKED SOCKET OUTLETS IP67
Products for wineries
IP66/IP67 BASES AND CONSUMER UNIT
Description
Base for one
socket
Description
Base for one
socket with
derivation box
Description
Base for one
socket with
consumer unit
Description
Base for two
sockets with
derivation box
Description
Base for two
sockets with
consumer unit
DIN
Module modules
HxB
(mm)
Power
dissipation
(W)
16A-32A
-
260x130
-
1
63A
-
380x170
-
1
HxB
(mm)
Power
dissipation
(W)
DIN
Module modules
-
460x130
9
1
63A
-
580x170
13
1
HxB
(mm)
Power
dissipation
(W)
DIN
Module modules
6
460x130
9
1
63A
8
580x170
13
1
HxB
(mm)
Power
dissipation
(W)
DIN
Module modules
-
460x260
16
1
63A
-
-
-
-
HxB
(mm)
Power
dissipation
(W)
579.5210
13
460x260
16
1
63A
-
-
-
-
63A
579.5111
579.5211
63A
579.5120
-
16A-32A
16A-32A
63A
579.5110
16A-32A
16A-32A
DIN
Module modules
579.5200
16A-32A
16A-32A
63A
579.5100
16A-32A
16A-32A
Power dissipation in conformity with CEI 23-48 CEI 23-49.
IP66/IP67 when coupled with the respective component.
20
16A-32A
63A
579.5121
Pack Quantity.
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
BACK BOX
Description
HUB size
(Inch)
Receptacle
Inlets
Cubic Inch
capacity
Packaging
Size 1 (small)
1
16/20A - 32/30A
-
30
1/10
SCMBB01
1¼
63/60A
16/20A - 32/30A - 63/60A
75
1/10
SCMBB02
Size 2 (medium)
Notes:
- Internal grounding plate provided
- HUB is not included
NON-FUSIBLE MOTOR DISCONNECT SWITCHES
3 POLES - SURFACE MOUNTING 20A÷40A
306x226x115 mm
GENERAL
USE
Poles
IP degree
20A
3
IP66
1/12
SCM.20DS3-S1
30A
3
IP66
1/12
SCM.30DS3-S1
40A
3
IP66
1/12
SCM.40DS3-S1
Package/Bulk Pack
- Equipped with door locking.
- Switch disconnectors units suitable as spare parts available in the general catalogue.
Padlockable handle
in one position (OFF).
Padlockable handle in
two positions (ON/OFF).
OFF position = 3 padlocks
ON position = 1 padlock
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
21
Products for wineries
DIMENSIONS - BASES ADVANCE-GRP 20A-30A-60A
22
VERSION
A
B
C
579.5110
460
130
579.5111
460
130
579.5121
460
260
579.5120
460
260
579.5210
580
579.5211
580
D
E
F
G
H
I
260
-
137
31
198
114
8
260
150
137
31
198
114
8
260
-
137
31
198
244
8
260
150
137
31
198
244
8
170
380
-
181,5
35
310
150
10
170
380
168
181,5
35
310
150
10
(Dimensions in mm)
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
DIMENSIONS - SOCKET OUTLETS ADVANCE-GRP 20A-30A-60A
VERSION
A
B
C
D
E
F
G
H
I
L
M
N
2P+E
20A
260
130
360
280
170
164
114,5
7,75
198
31
25
33,5
3P+E
20A
260
130
365
282
175
164
114,5
7,75
198
31
25
33,5
3P+N+E
20A
260
130
390
282
182
164
114,5
7,75
198
31
25
33,5
2/3P+E
30A
260
130
390
285
189
164
114,5
7,75
198
31
25
33,5
3P+N+E
30A
260
130
400
286
185
164
114,5
7,75
198
31
25
33,5
2P+E
60A
3P+E
60A
380
170
550
420
225
203
150
8,3
310
35
32,5
40
3P+N+E
60A
(Dimensions in mm)
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
23
Products for wineries
DIMENSIONS - EUREKA-HD
PLUG IP67 20A AND 30A
A
B
Corp grip
range
C
PLUG IP67 60A
A
inches mm inches mm inches mm inches mm
Corp grip
range
C
inches mm inches mm inches mm
inches
mm
16/20A 2P3W
2,87
73
6,20
157
5,23
133 ,570-,710 14-18
60/63A 2P3W
4,41
112
9,68
246
7,67
195 ,937-1,375 24-35
16/20A 3P4W
3,17
81
6,47
164
5,51
140 570-,710 14-18
60/63A 3P4W
4,41
112
9,68
246
7,67
195 ,937-1,375 24-35
16/20A 4P5W
3,48
88
7,02
178
6,06
154 570-,710 14-18
60/63A 4P5W
4,41
112
9,68
246
7,67
195 ,937-1,375 24-35
30/32A 2P3W
3,66
93
7,37
187
6,13
156 ,675-,910 17-23
30/32A 3P4W
3,66
93
7,37
187
6,13
156 ,675-,910 17-23
30/32A 4P5W
3,96
101
8,15
207
6,91
176 ,675-,910 17-23
CONNECTOR IP67 20A AND 30A
A
B
Corp grip
range
C
CONNECTOR IP67 60A
A
inches mm inches mm inches mm inches mm
24
B
B
Corp grip
range
C
inches mm inches mm inches mm
inches
mm
16/20A 2P3W
2,87
73
6,75
171
2,97
75 ,570-,710 14-18
60/63A 2P3W
4,41
112 10,52 267
4,47
114 ,937-1,375 24-35
16/20A 3P4W
3,17
81
7,04
179
3,28
83
570-,710 14-18
60/63A 3P4W
4,41
112 10,52 267
4,47
114 ,937-1,375 24-35
16/20A 4P5W
3,48
88
7,62
194
3,75
95
570-,710 14-18
60/63A 4P5W
4,41
112 10,52 267
4,47
114 ,937-1,375 24-35
30/32A 2P3W
3,66
93
8,04
204
4,04
103 ,675-,910 17-23
30/32A 3P4W
3,66
93
8,04
204
4,04
103 ,675-,910 17-23
30/32A 4P5W
3,96
101
8,83
224
4,03
102 ,675-,910 17-23
(Dimensions in mm)
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
INLET IP67 20A AND 30A
A
inches
2,87
3,17
3,48
3,66
3,66
3,96
16/20A 2P3W
16/20A 3P4W
16/20A 4P5W
30/32A 2P3W
30/32A 3P4W
30/32A 4P5W
B
mm
inches
73
81
88
93
93
101
C
mm
1,96
1,96
1,96
2,32
2,32
2,32
inches
50
50
50
59
59
59
D
mm
4,50
4,50
4,50
4,50
4,50
4,50
inches
114
114
114
114
114
114
E
mm
,75
,75
,75
1,32
1,32
1,32
inches
19
19
19
34
34
34
F
mm
3,87
3,87
3,87
3,87
3,87
3,87
inches
98
98
98
98
98
98
G
mm
3,87
3,87
3,87
3,87
3,87
3,87
inches
98
98
98
98
98
98
H
mm
2,38
2,38
2,38
2,38
2,38
2,38
inches
60
60
60
60
60
60
mm
,282
,282
,282
,282
,282
,282
7,2
7,2
7,2
7,2
7,2
7,2
INLET IP67 60A
A
inches
60/63A 2P3W
60/63A 3P4W
60/63A 4P5W
B
mm
4,41
4,41
4,41
inches
112
112
112
C
mm
3,44
3,44
3,44
inches
87
87
87
4,50
4,50
4,50
D
mm
inches
114
114
114
E
mm
1,68
1,68
1,68
43
43
43
inches
3,87
3,87
3,87
F
mm
inches
98
98
98
G
H
mm
inches
mm
inches
98
98
98
3,25
3,25
3,25
83
83
83
,282
,282
,282
3,87
3,87
3,87
mm
7,2
7,2
7,2
RECEPTACLE IP67 20A AND 30A
A
16/20A 2P3W
16/20A 3P4W
16/20A 4P5W
30/32A 2P3W
30/32A 3P4W
30/32A 4P5W
B
C
D
E
F
G
H
I
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
2,87
3,17
3,48
3,66
3,66
3,96
73
81
88
93
93
101
2,32
2,34
2,37
2,79
2,79
2,81
59
60
60
71
71
71
2,97
2,97
2,97
2,97
2,97
2,97
,76
,76
,76
,76
,76
,76
,94
,94
,94
1,52
1,52
1,52
24
24
24
39
39
39
2,36
2,36
2,36
2,36
2,36
2,36
60
60
60
60
60
60
2,36
2,36
2,36
2,36
2,36
2,36
60
60
60
60
60
60
2,38
2,38
2,38
2,38
2,38
2,38
60
60
60
60
60
60
,219
,219
,219
,219
,219
,219
5,5
5,5
5,5
5,5
5,5
5,5
2,97
3,28
3,75
4,04
4,04
4,03
75
83
95
103
103
102
RECEPTACLE IP67 60A
A
60/63A 2P3W
60/63A 3P4W
60/63A 4P5W
B
C
D
E
F
G
H
I
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
4,41
4,41
4,41
112
112
112
4,16
4,16
4,16
106
106
106
4,50
4,50
4,50
114
114
114
1,68
1,68
1,68
43
43
43
3,87
3,87
3,87
98
98
98
3,87
3,87
3,87
98
98
98
3,25
3,25
3,25
83
83
83
,282
,282
,282
7,2
7,2
7,2
4,47
4,47
4,47
114
114
114
(Dimensions in mm)
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
25
Products for wineries
DIMENSIONS - DISTRIBUTION PEDESTAL TERMINAL
26
(Dimensions in mm)
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
Products for wineries
DIMENSIONS - BACK BOX
SCMBB01
SCMBB02
DIMENSIONS - NON-FUSIBLE MOTOR DISCONNECT SWITCHES
3 POLES 20A, 30A, 40A
(Dimensions in mm)
www.powerdynamics.com 145 Algonquin Parkway Whippany, NJ 07981 Phone(973)560-0019 [email protected]
27
ZP00935-USA-1
Click&Go
Power Dynamics, Inc.
145 Algonquin Parkway
Whippany, NJ 07981
Phone(973)560-0019
www.powerdynamics.com
[email protected]
SCAME PARRE S.p.A.
VIA COSTA ERTA, 15
24020 PARRE (BG) ITALY
TEL. +39 035 705000
FAX +39 035 703122
U
kr
ai
ne
U
ru
gu
ay
U
ni
te
d
Ki
ng
do
m
ScameOnLine
www.scame.com
[email protected]
U
.A
.E
.
Sp
ai
n
Sl
ov
ak
ia
Ro
m
an
ia
Po
rtu
ga
l
Po
la
nd
In
di
a
Fr
an
ce
Re
pu
bl
ic
C
ze
ch
C
ro
at
ia
C
hi
na
C
hi
le
H
er
ze
go
vi
na
Br
az
il
Bo
sn
ia
Ar
ge
nt
in
a
www.scame.com