MAATSS0019

MAATSS0019
Digital Attenuator, 4-Bit, Single Control, 15 dB
0.5 - 4.0 GHz
Functional Schematic 3,4
Features







Rev. V3
Single Control CMOS Logic for Each Bit
Attenuation: 1 dB Steps to 15 dB
Low DC Power Consumption: 50 µW
Lead-Free TSSOP-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
RF1
RF2
VS
GND GND GND GND GND GND
Pin 16
Description
The M/A-COM MAATSS0019 is a 4 Bit, 1 dB step
GaAs MMIC digital attenuator in a lead-free TSSOP16 surface mount plastic package.
The
MAATSS0019 is ideally suited for use where high
accuracy, very low power consumption and low
intermodulation products are required.
Typical
applications include radio, cellular, wireless LANs,
GPS equipment and other gain / level control
circuits.
The MAATSS0019 is fabricated using a mature 1
micron GaAs MESFET process.
The process
features full chip passivation for increased
performance and reliability.
8
4
2
1
Pin 1
GND GND VC1 VC2 VC3 VC4 GND GND
3. Required external blocking caps shown.
4. VS can be applied at RF1 or RF2 using a 10K Ω or greater
pull-up resistor.
Pin Configuration
Ordering Information 1,2
Part Number
Package
Pin No.
Function
Pin No.
Function
MAATSS0019
Bulk Packaging
1
Ground
9
RF Port 2
MAATSS0019TR
1000 piece reel
2
Ground
10
Ground
MAATSS0019SMB
Sample Board
3
VC1
11
Ground
4
VC2
12
Ground
5
VC3
13
Ground
6
VC4
14
Ground
7
Ground
15
Ground
8
Ground
16
RF Port 1
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0019
Digital Attenuator, 4-Bit, Single Control, 15 dB
0.5 - 4.0 GHz
Rev. V3
Electrical Specifications: TA = 25°C
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Reference Insertion Loss
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
dB
dB
dB
dB
—
—
—
—
1.3
1.6
1.8
2.5
1.6
—
—
—
Attenuation Accuracy
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 4.0 GHz
VSWR
0.5 - 2.0 GHz
2.0 - 4.0 GHz
Ratio
Ratio
—
—
1.3:1
1.3:1
—
—
Trise, Tfall
—
µS
—
2.5
—
Ton, Toff
—
µS
—
1.0
—
Input P1dB
> 0.5 GHz
dBm
—
24
—
IP2
Measured Relative to Input Power, Two Tone
input up to 5 dBm, 5 MHz Spacing > 0.5 GHz
dBm
—
80
—
IP3
Measured Relative to Input Power, Two Tone
input up to 5 dBm, 5 MHz Spacing > 0.5 GHz
dBm
—
47
—
Absolute Maximum Ratings 5,6
Parameter
Absolute Maximum
Input Power
50 MHz
500 - 4000 MHz
+27 dBm
+34 dBm
Control Voltage
± (0.25 dB +5% of Atten. setting in dB) dB
± (0.4 dB +5% of Atten. setting in dB) dB Typical
± (0.6 dB +5% of Atten. setting in dB) dB Typical
Truth Table 7,8
VC1
VC2
VC3
VC4
Attenuation (dB)
1
1
1
1
Reference IL
1
1
1
0
1
+8 V, -1.0 V
1
1
0
1
2
Operating Temperature
-40°C to +85°C
1
0
1
1
4
Storage Temperature
-65°C to +150°C
0
1
1
1
8
0
0
0
0
15
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. M/A-COM does not recommend sustained operation near
these survivability limits.
7. 0 = 0 ± 0.2 V, 1 = +5 V @ 50 µA max. current total.
8. VS = +5 V.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0019
Digital Attenuator, 4-Bit, Single Control, 15 dB
0.5 - 4.0 GHz
Rev. V3
Typical Performance Curves
Insertion Loss
Relative Attenuation
5
16
14
4
12
10
3
8
2
6
4
1
2
0
0
1
2
3
4
0
0
1
3
4
Output Return Loss
Input Return Loss
0
0
IL
1 dB
2 dB
4 dB
8 dB
15 dB
-10
-10
-20
-20
IL
1 dB
2 dB
4 dB
8 dB
15 dB
-30
-30
-40
2
Frequency (GHz)
Frequency (GHz)
0
1
2
3
4
-40
0
1
2
3
4
3
4
Frequency (GHz)
Frequency (GHz)
Attenuation Accuracy
Input IP3
50
0.8
1 dB
2 dB
4 dB
8 dB
15 dB
0.6
0.4
45
0.2
40
0
-0.2
IL
1 dB
2 dB
4 dB
8 dB
15 dB
35
-0.4
-0.6
0
1
2
Frequency (GHz)
3
4
30
0
1
2
Frequency (GHz)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0019
Digital Attenuator, 4-Bit, Single Control, 15 dB
0.5 - 4.0 GHz
Rev. V3
Lead Free TSSOP-16†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAATSS0019
Digital Attenuator, 4-Bit, Single Control, 15 dB
0.5 - 4.0 GHz
Rev. V3
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support