MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Features Rev. V5 Functional Schematic Attenuation: 1 dB Steps to 50 dB Single Positive Supply Contains Internal DC to DC Converter Low DC Power Consumption Small Footprint, JEDEC Package Integral TTL Driver 50 ohm Impedance Lead-Free CSP-1 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of AT90-1106 Description The MAAD-007080 is a GaAs FET 6-bit digital attenuator with integral TTL driver. Step size is 1 dB providing a 50 dB total attenuation range. This device is in a PQFN plastic surface mount package. MAAD-007080 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required. For dual supply designs without switching noise, use MAAD-007082-000100. Ordering Information Pin Configuration1 Pin No. Function Pin No. Function 1 C16 17 NC 2 C8 18 NC 3 C4 19 +Vcc 4 C2 20 NC 5 C1 21 Cp 6 C32 22 NC 7 GND 23 Cp 8 NC 24 NC 9 NC 25 -Vee3 10 NC2 26 GND Part Number Package MAAD-007080-00100 Bulk Packaging MAAD-007080-001TR 1000 piece reel 11 GND 27 RF2 MAAD-0007080-001TB Sample Test Board 12 RF1 28 GND 13 GND 29 NC2 14 NC 30 -Vee3 15 NC 31 NC 16 NC 32 +Vcc Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 1. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) 2. Pins 10 & 29 must be isolated 3. -Vee is produced internally and requires a .1µF cap to GND. Generated noise is typical of switching DC-DC Converters. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Rev. V5 Electrical Specifications: TA = 25°C, Z0 = 50 Parameter Test Conditions Frequency Units Min Insertion Loss — DC - 2.4 GHz dB — Attenuation Accuracy Individual Bits 1-2-4-8-16-32 dB Any Combination of Bits 1 to 50 dB DC - 2.4 GHz DC - 2.4 GHz dB VSWR Full Range DC - 2.4 GHz Ratio — Switching Speed 50% Cntl to 90%/10% RF 10% to 90% or 90% to 10% — ns — 1 dB Compression — dBm — Input IP3 Two-tone inputs up to +5 dBm dB — V 4.75 5.0 5.25 — 0.8 5.0 50 MHz 0.5 - 2.4 GHz 50 MHz 0.5-2.4 GHz Max 5.5 6.0 ±(.3 +5% of atten setting) ±(.5 +8% of atten setting) 1.8:1 2:1 75 20 +21 +24 +35 +48 — — — Vcc — VIL VIH LOW-level input voltage HIGH-level input voltage — V 0.0 2.0 lin (Input Leakage Current) Vin = VCC or GND — µA -1.0 — 1.0 Icc4 Vcc min to max, Logic “0” or “1” — mA — 6 10 For guaranteed start-up — mA — — 125 mA — — 1.0 Turn-on Current 5 — Typ ΔIcc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V Switching Noise Generated from DC-DC Converter with recommended capacitors 3.5 MHz dBm — -93 — Thermal Resistance θjc — — °C/W — 15 — 4. During turn-on, the device requires an initial “Turn-on Current”. Once operational, Icc will drop to the specified levels. 5. The DC-DC converter is guaranteed to start in 100 µs as long as the power supplies can provide a minimum of 100 mA “Turn-on Current”. Absolute Maximum Ratings6,7 Parameter Absolute Maximum Input Power 0.05 GHz 0.5 - 2.4 GHz +27 dBm +34 dBm VCC -0.5V ≤ VCC ≤ +6.0V Vin8 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC Recommended PCB Configuration9 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. 8. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. 9. Application Note S2083 is available at www.macom.com. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Rev. V5 Handling Procedures Please observe the following precautions to avoid damage: Truth Table (Digital Attenuator) C32 C16 C8 C4 C2 C1 Attenuation Static Sensitivity 0 0 0 0 0 0 Loss, Reference Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 0 0 0 0 0 1 1.0 dB 0 0 0 0 1 0 2.0 dB 0 0 0 1 0 0 4.0 dB 0 0 1 0 0 0 8.0 dB 0 1 0 0 0 0 16.0 dB 1 0 0 0 0 0 32.0 dB 1 1 0 0 1 0 50.0 dB Moisture Sensitivity The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. 0 = TTL Low; 1 = TTL High Typical Performance Curves VSWR @ Insertion Loss Insertion Loss 2.2 1.9 5.0 VSWR Loss (dB) Out p ut Inp ut 6.0 4.0 1.6 1.3 1.0 3.0 0 400 800 1200 1600 2000 2400 0 400 Fre que ncy (MHz ) 1200 1600 2000 2400 Frequency (MHz) Attenuation Error, 1 dB Bit Attenuation Error, 2 dB Bit 0.2 0.2 Attenuation Error (dB) Attenuation Error (dB) 800 0.1 0.0 -0.1 -0.2 0.1 0.0 -0.1 0 400 800 1200 1600 Fre que ncy (MHz ) 2000 2400 0 400 800 1200 1600 2000 Frequency (MHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2400 MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Rev. V5 Typical Performance Curves Attenuation Error, 8 dB Bit Attenuation Error (dB) Attenuation Error (dB) Attenuation Error, 4 dB Bit 0.4 0.3 0.2 0.1 0.0 0.4 0.3 0.2 0.1 0.0 -0.1 -0.2 -0.1 0 0 400 800 1200 1600 2000 400 2400 1600 2000 1.0 Attenuation Error (dB) 0.6 0.2 -0.2 -0.6 0.6 0.2 -0.2 -0.6 0 400 800 1200 1600 2000 2400 0 400 Fre que ncy (MHz ) 800 1200 1600 2000 2400 Fre que ncy (MHz ) Attenuation Error, Max. Attenuation VSWR, 1 dB Bit Inp ut Out p ut 1.8 2.5 1.6 VSWR Attenuation Error (dB) 2400 Attenuation Error, 32 dB Bit 1.0 Attenuation Error (dB) 1200 Frequency (MHz) Frequency (MHz) Attenuation Error, 16 dB Bit 800 0.5 1.4 1.2 -1.5 1.0 0 -3.5 0 400 800 1200 1600 Fre que ncy (MHz ) 2000 400 800 1200 1600 2000 2400 Frequency (MHz) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2400 MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Rev. V5 Typical Performance Curves VSWR, 4 dB BIt VSWR, 2 dB Bit Inp ut Out put I nput 1.8 Out p ut 1.8 1.6 VSWR VSWR 1.6 1.4 1.4 1.2 1.2 1.0 0 1.0 0 400 800 1200 1600 2000 400 800 1200 1600 2000 2400 Frequency (MHz) 2400 Fre que ncy (MHz ) VSWR, 8 dB Bit VSWR, 16 dB Bit Out p ut Inp ut 1.8 I np ut O ut p ut 1.6 1.4 1.4 VSWR VSWR 1.6 1.2 1.2 1.0 0 400 800 1200 1600 2000 2400 1.0 Frequency (MHz) 0 400 800 1200 1600 2000 2400 Fre que ncy (MHz ) VSWR, 32 dB Bit VSWR, Maximum attenuation Inp ut Out p ut Inp ut 1.60 VSWR VSWR 1.40 1.20 1.4 1.2 1.0 1.00 0 5 Out p ut 1.6 400 800 1200 1600 Fre que ncy (MHz ) 2000 2400 0 400 800 1200 1600 2000 Frequency (MHz) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 2400 MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Rev. V5 Typical Performance Curves Maximum IP3 over Temperature Range and Attenuation @ 950 MHz Maximum IP3 over Temperature Range and Attenuation @ 50 MHz 50 IP3 (dBm) IP3 (dBm) 50 40 30 20 Loss 1 2 4 8 16 32 50 Attenuation (dB) 40 30 20 Loss 1 2 4 8 16 32 Attenuation (dB) Maximum IP3 over Temperature Range and Attenuation @ 1900 MHz IP3 (dBm) 50 40 30 20 Loss 1 2 4 8 16 32 50 Attenuation (dB) 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 50 MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Rev. V5 CSP-1, Lead-Free 4 x 6 mm, 32-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAD-007080 Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.4 GHz Rev. V5 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support