VC850M-TO46GL v 2.0 15.05.2014 Description VC850M-H-TO46GL is a multi mode infrared VCSEL emitting at typically 850 nm with rated output power of 10 mW cw, mounted into a standard TO-46 package and sealed with a glass lens cap. The VCSEL works under low forward current and voltage. Maximum Ratings Parameter Values Symbol Min. IF VF Forward Current Reverse Voltage (@ 10µA) Operating Temperature Storage Temperature Lead Solder Temperature * TCASE TSTG TSLD Unit Max. 12 5 + 85 + 100 + 260 0 - 40 mA V °C °C °C * must be completed within 10 seconds Electro-Optical Characteristics Parameter Symbol λPeak ∆λ PO ϴ ITH IF VF VB η RD Emission Wavelength Spectral Width Optical Output Power Beam Divergence Threshold Current Operating Current Operating Voltage Breakdown Voltage Slope Efficiency Dynamic Resistance (TCASE=25°C) Min. Values Typ. 840 850 0.3 20 2 5 1.5 6 1.8 -10 0.4 35 Max. 860 0.85 3 2.2 0.7 55 Unit nm nm mW ° mA mA V V mW/mA Ω Thermal Characteristics Parameter ITH Temperature Variation η Temperature Variation λ Temperature Variation www.roithner-laser.com Symbol ΔITH Δη / ΔT Δλ / ΔT Min. Values Typ. 1 -0.5 0.06 Max. Test Conditions Unit TC=0 to 85°C TC=0 to 85°C,6mA TC=0 to 85°C,6mA mA %/°C nm/°C 1 Outline Dimensions TO46GL TO-46 with glass lens All Dimensions in mm Electrical Connection Lead Pin 1 Pin 2 Description LD Anode LD Cathode Precautions Static Electricity: VCSELs are sensitive to electrostatic discharge (ESD). Precautions against ESD must be taken when handling or operating these VCSELs. Surge voltage or electrostatic discharge can result in complete failure of the device. Safety Advice: This VCSEL emits concentrated infrared light which can be hazardous to the human eye and skin. This diode is classified as CLASS 3B laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Operation: Do only operate VCSELs with a current source. Running these LEDs from a voltage source will result in complete failure of the device. Current of a LED is an exponential function of the voltage across it. Usage of current regulated drive circuits is mandatory. © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice www.roithner-laser.com 2