VC850M-H-TO46FW-PD v 1.3 15.05.2014 Description VC850M-H-TO46FW-PD is a multi mode infrared VCSEL emitting at typically 850 nm with rated output power of 10 mW cw, mounted into a standard TO-46 package, containing a monitor photo diode and sealed with a flat window cap. The VCSEL works under low forward current and voltage and with 1 Gbps data rate. Maximum Ratings Parameter Forward Current Reverse Voltage (@ 10µA) Operating Temperature Storage Temperature Lead Solder Temperature * Values Symbol Min. IF VF TCASE TSTG TSLD Unit Max. 30 5 + 70 + 100 + 260 0 - 40 mA V °C °C °C * must be completed within 10 seconds Electro-Optical Characteristics Parameter Symbol Emission Wavelength Spectral Width Optical Output Power Threshold Current Operating Current Operating Voltage Breakdown Voltage Slope Efficiency Dynamic Resistance Monitor Current Dark Current PD Reverse Voltage VF=0V,Freq=1MHz PD Capacitance VF=5V,Freq=1MHz λPeak ∆λ PO ITH IF VF VB η RD IPD ID VPDR www.roithner-laser.com CPD (TCASE=25°C) Min. 840 0.2 0.1 Values Typ. 850 8 5 20 2.0 -10 0.4 20 Max. 860 0.85 2.3 30 1 10 40 50 20 Unit nm nm mW mA mA V V mW/mA Ω mA nA V pF 1 Thermal Characteristics Parameter ITH Temperature Variation η Temperature Variation λ Temperature Variation IPD Temperature Variation Symbol ΔITH Δη / ΔT Δλ / ΔT ΔIPD / ΔT Min. Values Typ. 2.5 -0.5 0.06 0.2 Max. Test Conditions Unit TC=0 to 70°C TC=0 to 70°C,20mA TC=0 to 70°C,20mA PO= 8mW mA %/°C nm/°C %/°C Outline Dimensions TO46FW TO-46 with flat window All Dimensions in mm Electrical Connection Lead Pin 1 Pin 2 Pin 3 www.roithner-laser.com Description LD Anode LD Cathode, PD Anode PD Cathode 2 Precautions Static Electricity: VCSELs are sensitive to electrostatic discharge (ESD). Precautions against ESD must be taken when handling or operating these VCSELs. Surge voltage or electrostatic discharge can result in complete failure of the device. Safety Advice: This VCSEL emits concentrated infrared light which can be hazardous to the human eye and skin. This diode is classified as CLASS 3B laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Operation: Do only operate VCSELs with a current source. Running these LEDs from a voltage source will result in complete failure of the device. Current of a LED is an exponential function of the voltage across it. Usage of current regulated drive circuits is mandatory. © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice www.roithner-laser.com 3