TT Series 10 mm switching solenoid valve FEATURES · 3-way, 2 position (NO, NC & Distributor) · Optional ‘Hit and Hold’ drive electronics using pulse width modulation (PWM) for low power consumption · Minimum flow of 8 lpm @ 6 psi and 22 lpm @ 30 psi · 10 mm single piece body design · Barbed pressure ports allow for direct tubing or manifold assemblies · RoHS compliant · PRO services MEDIA COMPATIBILITY PHYSICAL PROPERTIES Non-reactive gases Operating environment (continuous duty) 0 to 50 °C Storage temperature WETTED MATERIALS Spacing PBT (polybutylene terephthalate) glass filled; 430FR series stainless steel; 302 series stainless steel; silicone, EPDM or Viton (FKM) elastomer Voltage Electrical connections E / 11727 / B 10 mm (centerline) Barbs for 1.98 mm (0.078 in) I.D. tubing or manifold mount with gasket Weight without electronics with electronics ELECTRICAL Power P006C..., P006D... all other Porting 1.0 W 0.5 W -40 to 70 °C Internal volume 10.7 g 12 g 0.131 cm3 (0.0080 in3) 5, 12, 24 VDC PC pins 1/4 www.first-sensor.com www.sensortechnics.com TT Series 10 mm switching solenoid valve PERFORMANCE CHARACTERISTICS Part no. Pressure TT...S... (silicone elastomer) 0...6 psi TT...V... (Viton elastomer), TT...E... (EPDM elastomer) 0...6 psi, 0...20 psi, 0...30 psi Minimum flow 8 lpm @ 6 psi, 22 lpm @ 30 psi Orifice siz es/ Equivalent CV1 0.060" (1.52 mm)/ 0.042 CV Leak rate2 Response ≤0.016 sccm <5 ms cycling ≤0.2 sccm <20 ms cycling FLOW CURVES (typical air flow at 24 °C)3 6 psi devices 20 psi and 30 psi devices Notes: 1 The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2 sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3 slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. E / 11727 / B 2/4 www.first-sensor.com www.sensortechnics.com TT Series 10 mm switching solenoid valve OUTLINE DRAWING AND MANIFOLD MOUNT DIAGRAM 6 psi devices 1.139 (28.93) 0.020 (0.5) sq. pins 0.077 (1.96) 0.575 0.375 (14.61) (9.53) Long pin Short pin 0.475 (12.07) 0.170 (4.32) Normally open port Common port Normally closed port 0.148 (3.75) Ø 0.120 (3.05) 0.030 (0.76) for use with wire hold down for PCB mounting Barb fittings for 0.078 (1.98) I.D. polyurethane tubing Ø 0.093 (2.36) 0.976 (24.79) 0.212 (5.38) 2-56 UNC-2B 0.766 (19.46) dimensions in inches (mm) 0.871 (22.12) 0.197 (5.0) 0.394 (10.01) 0.394 (10.01) 0.390 (9.91) 0.195 (4.95) 0.174 (4.42) 0.236 (6.00) Feature for 2-56 screw for valve mounting 0.870 (22.10) 0.766 (19.46) 0.976 (24.79) 0.207 (5.26) 1.25 (31.78) Ø 0.090 Ø 0.132 ±0.001 x 0.180 Ø 0.154 ±0.003 x 0.055 ±0.002 c'drill 40° to Ø 0.132 (Ø 2.29 Ø 3.35 ±0.025 x 4.57 Ø 3.91 ±0.076 x 1.4 ±0.05 c'drill 40° to Ø 3.35) 20 psi and 30 psi devices with electronics 1.303 (33.10) 0.025 (0.64) sq. pins 1.174 (29.81) 0.212 (5.38) 0.100 (2.54) 0.361 (9.17) 0.619 (15.72) Normally open port Common port Normally closed port 0.170 (4.32) Ø 0.120 (3.05) 0.035 (0.89) Ø 0.093 (2.36) 0.976 (24.79) 0.267 (6.78) 0.766 (19.46) 2-56 UNC-2B 0.871 (22.12) Feature for 2-56 screw for valve mounting 0.870 (22.10) 0.262 (6.65) 0.197 (5.0) 0.394 (10.01) 0.394 (10.01) 0.390 (9.91) 0.195 (4.95) E / 11727 / B dimensions in inches (mm) Barb fittings for 0.078 I.D. polyurethane tubing 0.766 (19.46) 0.976 (24.79) Ø 0.090 Ø 0.132 ±0.001 x 0.180 Ø 0.154 ±0.003 x 0.055 ±0.002 c'drill 40° to Ø 0.132 (Ø 2.29 Ø 3.35 ±0.025 x 4.57 Ø 3.91 ±0.076 x 1.4 ±0.05 c'drill 40° to Ø 3.35) 3/4 www.first-sensor.com www.sensortechnics.com TT Series 10 mm switching solenoid valve ORDERING INFORMATION 6 psi devices Series Options TT Ways Pressure / Function / Elastomer Voltage 2 2 way P 006P S 6 psi, NO, Silicone 05 5 V DC 3 3 way P 006P E 6 psi, NO, EPDM 12 12 V D C 24 24 V D C P006CV* 6 psi, NC, Viton (FKM) Electical S Short pins, without electronics L Long pins, without electronics P006DV* 6 psi, Distributor, Viton (FKM) P006DE* 6 psi, Distributor, EPDM * not available as 2 way version Example: TT 3 P 006P S 05 S 20 psi and 30 psi devices with electronics Series Options TT Ways 3 3 way Pressure / Function Elastomer P020D 20 psi, Distributor V Viton (FKM) 05 5 V DC P030P 30 psi, NO E EPD M 12 12 V D C 24 24 V D C P030C 30 psi, NC Example: TT 3 Voltage P 030C V 12 Electical E Pins, 2.54 mm, integrated electronics E Note: Not all combinations might be available. Please contact First Sensor. Accessories (please order separately using the following order numbers) Order No. Description 191-000112-010 (extra charge) Mounting screws for 6 psi devices (2 screws per valve) 191-000112-012 (extra charge) Mounting screw for 20 psi and 30 psi devices (2 screws per valve) 195-000211-001 (extra charge) Manifold gasket (FKM) (1 gasket per valve) 195-000242-001 (extra charge) Manifold gasket (EPDM) (1 gasket per valve) 590-000073-001 (extra charge) 18 " leads w/ connector (only for devices with integrated electronics) PRO services: · Extended warranty period of 2 years · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11727 / B 4/4 www.first-sensor.com www.sensortechnics.com