MW156 Universal 75 Watt Series Medical / Switch Mode Power Supply •100-240 VAC Universal Input •ENERGY STAR Level IV Compliant •Low Life-Cycle Operation Cost •Desktop Style •Complies with EMI/RFI Regulations •CE Compliant (LVD, EMC, WEEE, RoHS) •Impact Resistant, Non-vented Polycarbonate Enclosure •Modified and Custom Designs also Available International Safety Standard Approvals Specifications General Specifications +/-1% Topology 1% Vp-p max. 3.0ms max. for 50% Load Change Slew Rate of 0.1A/us Cycle-by-Cycle Current Limiting Automatic Recovery for Overload or Short Circuit; Active OVP Output Specifications Line and Load Voltage Regulation Excluding Cord Ripple Transient Response Protection Input Specifications Voltage 100-240VAC Nominal Line Frequency 47-63Hz Input Current 2.0A max. Protection Input Fuse Inrush Limited Environmental Specifications Thermal Performance Operating Temperature 0° C to 40° C with no Derating Cooling Convectional Relative Humidity Non-condensing 5% to 95% Altitude 0-10,000 feet Quasi-resonant Fly-back Current-mode Control Efficiency Energy Star Level IV Hold-up Time @120V 16ms, Typical Storage Temp -20° C to +85° C Approvals and Safety Standards UL60601-1, TUV/EN60601-1 IEC60601-1 MTBF 165,000 Hours Weight 408g (14.8oz) Case and Dimension LP6 5.44L x 2.19W x 1.32H (in) 138.2L x 55.6W x 33.5H (mm) Case Material V-0 Polycarbonate Black Cord and Connectors 6ft. (1.8m) 2-Conductor, 18AWG Standard AULT#3 Connector. Non-ventilated Enclosure SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com MW156 Universal 75 Watt Series Medical / Switch Mode Power Supply For the most current data and application support visit www.slpower.com Output Currents Output Voltage Min Max Ault Part Number MW156RA1203N01 12 V 0.00 A 6.30 A 75.0 W* MW156RA1503N01 15 V 0.00 A 5.00 A 75.0 W MW156RA1803N01 18 V 0.00 A 4.20 A 75.0 W MW156RA2403N01 24 V 0.00 A 3.10 A 75.0 W Ault Part Number Key MW156 R A 12 03 N 01 Product Family Name Manufacturing Location Type Revision Output Voltage Output Connector Style Input Connector Style Standard Item (other numbers for custom) *12V model rated 70W with input voltages rated 100-119V, 75W with input voltages rated 120-240VAC. EMI Compliance FCC Harmonic ESD RFS EFT Surge EN55024 IEC 61000-3-2 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 Class B Conducted and Radiated Class A CD Level 2 AD Level 3, Criterion B Level 2, Criterion A Level 2, Criterion A Level 3, Criterion B Optional Features Various output cord wire gauges and connector styles available. See Ault connector style sheets for connector options “Power-on” LED IEC 61000-3-2 Class D Harmonic Input Cord Active, Auto-recovery Over Temperature Protection Circuit Synchronous Rectification for Output Voltages Lower than 12V Private Label Marking Input Configuration Australian (E) Max Watts Pin Connections Shaver C8 (N) Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.4/2/08