RFN10BM3SFH : Diodes

Super Fast Recovery Diode
Datasheet
RFN10BM3SFH
Series
AEC-Q101 Qualified
Land Size Figure (Unit : mm)
Dimensions (Unit : mm)
6.0
6.0
Standard Fast Recovery
1.6
1.6
General rectification
3.0 2.0
Application
1
2.3 2.3
TO-252
Features
Cathode
1) Low switching loss
2) High current overload capacity
Structure
ROHM : TO-252
JEITA : SC-63
1
Construction
: Manufacture Date
Anode
Taping Dimensions (Unit : mm)
Silicon epitaxial planar type
2.0±0.05
φ1.55±0.1
1.550.1
0
8.0±0.1
0.4±0.1
φ3.0±0.1
3.00.1
8.0±0.1
10.1±0.1
10.1±0.1
0~0.5
6.8±0.1
13.5±0.2
TL
16.0±0.2
7.5±0.05
2.5±0.1
4.0±0.1
Anode
2.7±0.2
Absolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits
Unit
Repetitive peak reverse voltage
VRM
Duty≦0.5
350
V
Reverse voltage
VR
Direct voltage
350
V
Average rectified foward current
Io
60Hz half sin wave , Resistive load Tc=34°C
10
A
IFSM
60Hz half sin wave ,Non-repetitive at Tj=25°C()
80
A
Tj
-
150
°C
Tstg
-
55 to 150
°C
Forward current surge peak
Operating junction temperature
Storage temperature
()1-3pin commom circuit
Electrical Characteristics (Tj = 25°C)
Parameter
Symbol
Conditions
Min.
Forward voltage
VF
IF=10A
-
1.25
1.5
V
Reverse current
IR
VR=350V
-
0.05
10
A
Reverse recovery time
trr
IF=0.5A, IR=1A, Irr=0.25×IR
-
22
30
ns
Rth(j-c)
Junction to case
-
-
Thermal resistance
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/4
Typ. Max. Unit
6.0 °C / W
2015.01 - Rev.A
Data Sheet
RFN10BM3SFH
Electrical characteristic curves
100000
100
REVERSE CURRENT : IR(nA)
FORWARD CURRENT : IF(A)
Tj = 150°C
10
Tj = 150°C
1
Tj = 125°C
Tj = 75°C
0.1
Tj = 25°C
10000
1000
Tj = 75°C
100
Tj = 25°C
10
1
1-3pin common
0.1
0.01
0
500
1000
1500
2000
0
2500
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
50
100
150
200
250
300
350
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
1000
1000
f = 1MHz
Ta = 25°C
PEAK SURGE
FORWARD CURRENT : IFSM(A)
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
Tj = 125°C
100
10
Tj = 25°C
1-3pin common
100
10
IFSM
8.3ms
8.3ms
1cyc.
1
1
0
5
10
15
20
25
1
30
100
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
10
2/4
2015.01 - Rev.A
Data Sheet
RFN10BM3SFH
Electrical characteristic curves
100
TRANSIENT
THERMAL IMPEDANCE : Rth (°C/W)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
1000
Tj = 25°C
1-3pin common
100
10
IFSM
time
10
10
Rth(j-c)
1
0.1
0.001
1
1
Rth(j-a)
100
TIME : t(ms)
IFSM-t CHARACTERISTICS
0.01
0.1
1
10
100
1000
TIME : t(s)
Rth-t CHARACTERISTICS
Io
0A
D.C.
5.0
T
D = 0.5
4.5
D=t/T
VR=VRmax
Tj=150°C
half sin wave
4.0
D = 0.2
3.5
3.0
2.5
D = 0.1
2.0
1.5
1.0
18
T
D.C.
16
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
VR
t
5.5
VR
t
0V
6.0
0V
Io
0A
D=t/T
VR=VRmax
Tj=150°C
D = 0.5
14
half sin wave
12
10
8
6
D = 0.2
4
D = 0.1
2
0.5
0
0.0
0
30
60
90
120
0
150
AMBIENT TEMPERATURE : Ta(°C)
DERATING CURVE (Io-Ta)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
30
60
90
120
150
CASE TEMPERATURE : Tc(°C)
DERATING CURVE (Io-Tc)
3/4
2015.01 - Rev.A
Data Sheet
RFN10BM3SFH
Electrical characteristic curves
30
D.C.
FORWARD POWER
DISSIPATION : Pf (W)
25
D = 0.5
20
half sin wave
D = 0.2
15
D = 0.1
10
5
Tj = 150°C
0
0
2
4
6
8
10
12
14
16
18
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-Pf CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
4/4
2015.01 - Rev.A
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A