ROHM RB050L-40TF

Data Sheet
Shottky barrier diode
RB050L-40
Applications
General rectification
Dimensions (Unit : mm)
Land size figure (Unit : mm)
2.0
5
①
②
0.1±0.02
0.1
4.2
PMDS
2.0±0.2
1.5±0.2
Construction
Silicon epitaxial planar
5.0±0.3
3
4.5±0.2
Features
1) Small power mold type. (PMDS)
2) Low IR
3) High reliability.
1.2±0.3
2.0
2.6±0.2
Structure
ROHM : PMDS
JEDEC : SOD-106
①
②
Manufacture Date
Taping specifications(Unit : mm)
2.0±0.05
4.0±0.1
0.3
12±0.2
5.5±0.05
5.3±0.1
0.05
9.5±0.1
1.75±0.1
φ1.55±0.05
φ1.55
2.9±0.1
4.0±0.1
2.8MAX
Absolute maximum ratings(Ta=25°C)
Parameter
Reverse voltage (repetitive peak)
Reverse voltage (DC)
Average rectified forward current
Forward current surge peak (60Hz・1cyc)
Junction temperature
Storage temperature
Limits
40
40
3
70
125
Symbol
VRM
VR
Io
IFSM
Tj
Tstg
Unit
V
V
A
A
°C
°C
40 to 125
(*1)Mounted on epoxy board. 180°Half sine wave
Electrical characteristics (Ta=25°C)
Parameter
Forward voltage
Reverse current
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
Symbol
VF1
Min.
Typ.
Max.
Unit
-
-
0.55
V
IF=3.0A
VF2
-
-
0.50
V
IF=1.5A
IR
-
-
1
mA
VR=40V
1/3
Conditions
2013.06 - Rev.E
DataSheet
RB050L-40
Electrical characteristic curves (Ta=25°C)
Ta=25℃
Ta=-25℃
0.1
Ta=125℃
10000
1000
Ta=75℃
100
Ta=25℃
10
1
Ta=-25℃
0.1
100
10
0.01
0.01
0
100
200
300
400
500
FORWARD VOLTAGE:VF(mV)
VF-IF CHARACTERISTICS
0
600
5
10
15
20
25
30
35
1
40
0
REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS
510
500
AVE:503.8mV
490
480
80
70
60
50
40
30
20
AVE:9.069uA
580
570
560
AVE:579.1pF
550
540
530
520
10
510
0
500
VF DISPERSION MAP
IR DISPERSION MAP
200
Ct DISPERSION MAP
20
150
100
1cyc
Ifsm
50
8.3ms
0
200
Ifsm
Ta=25℃
IF=0.5A
IR=1A
Irr=0.25*IR
n=10pcs
15
PEAK SURGE
FORWARD CURRENT:IFSM(A)
REVERSE RECOVERY TIME:trr(ns)
AVE:157.0A
10
5
AVE:9.3ns
8.3ms 8.3ms
1cyc
150
100
50
0
0
1
trr DISPERSION MAP
IFSM DISRESION MAP
Ifsm
t
200
150
100
50
0
0.1
1
10
TIME:t(ms)
IFSM-t CHARACTERISTICS
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
100
10
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
100
5
1000
Mounted on epoxy board
Rth(j-a)
100
Rth(j-c)
10
IM=100mA
IF=1A
1
1ms
4
FORWARD POWER
DISSIPATION:Pf(W)
250
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
PEAK SURGE
FORWARD CURRENT:IFSM(A)
300
30
Ta=25℃
f=1MHz
VR=0V
n=10pcs
590
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
REVERSE CURRENT:IR(uA)
520
Ta=25℃
VR=40V
n=30pcs
90
Ta=25℃
IF=3A
n=30pcs
5
10
15
20
25
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
600
100
530
PEAK SURGE
FORWARD CURRENT:IFSM(A)
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ta=125℃
REVERSE CURRENT:IR(uA)
FORWARD CURRENT:IF(A)
1
f=1MHz
100000
Ta=75℃
FORWARD VOLTAGE:VF(mV)
1000
1000000
10
D=1/2
DC
3
Sin(θ=180)
2
1
time
300us
0.1
0.001
0
0.1
10
TIME:t(s)
Rth-t CHARACTERISTICS
2/3
1000
0
1
2
3
4
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
Io-Pf CHARACTERISTICS
5
2013.06 - Rev.E
DataSheet
RB050L-40
7
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
REVERSE POWER
DISSIPATION:PR (W)
8
6
D=1/2
4
DC
2
t
5
T
4
DC
VR
D=t/T
VR=20V
Tj=125℃
D=1/2
3
2
1
Sin(θ=180)
Sin(θ=180)
0
0
10
20
30
REVERSE VOLTAGE:VR(V)
VR-PR CHARACTERISTICS
40
7
Io
0A
0V
6
0
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
10
6
0A
0V
DC
5
t
T
D=1/2
4
Io
VR
D=t/T
VR=20V
Tj=125℃
3
2
Sin(θ=180)
1
0
0
25
50
75
100
AMBIENT TEMPERATURE:Ta(℃)
Derating Curve゙(Io-Ta)
125
0
25
50
75
100
125
CASE TEMPARATURE:Tc(℃)
Derating Curve゙(Io-Tc)
30
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
No break at 30kV
25
20
15
AVE:17.6kV
10
5
0
C=200pF
R=0Ω
C=100pF
R=1.5kΩ
ESD DISPERSION MAP
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
3/3
2013.06 - Rev.E
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
R1102A