RB060MM-40TF : Diodes

Schottky Barrier Diode
Datasheet
RB060MM-40TF
Application
AEC-Q101 Qualified
Land Size Figure (Unit : mm)
Dimensions (Unit : mm)
General rectification
1.2
0.1±0.1
0.05
3.5±0.12
2.6±0.1
Features
3.05
0.85
1.6±0.1
1) Small power mold type
PMDU
(PMDU)
0.9±0.1
2) High reliability
Cathode
Structure
0.8±0.1
ROHM : PMDU
JEDEC : SOD-123FL
3) Low VF
: Manufacture Date
Anode
Taping Dimensions (Unit : mm)
1.81±0.1
4.0±0.1
0.25±0.05
3.71±0.1
φ1.55±0.05
1.550.05
2.0±0.05
3.5±0.05
4.0±0.1
8.0±0.2
Silicon epitaxial planar type
1.75±0.1
Construction
φ1.0±0.1
1.00.1
1.5MAX
Absolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits
Unit
Repetitive Peak Reverse Voltage
VRM
Duty≦0.5
40
V
Reverse Voltage
VR
Direct Reverse Voltage
40
V
Average Forward Rectified Current
Io
2
A
Non-repetitive Forward Current Surge Peak
IFSM
Glass epoxi mounted, 60Hz half sin Wave
resistive load, Tc=78°C max.
60Hz half sin wave,
Non-repetitive at Ta=25°C,1cycle
30
A
Tj
-
150
°C
Tstg
-
55 to 150
°C
Operating Junction Temperature
Storage Temperature
Electrical Characteristics (Tj = 25°C)
Parameter
Symbol
Conditions
Min.
Forward Voltage
VF
IF=2.0A
-
-
0.56
V
Reverse Current
IR
VR=40V
-
-
500
A
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/5
Typ. Max. Unit
2015.07 - Rev.A
Data Sheet
RB060MM-40TF
Electrical Characteristic Curves
10000
Tj = 150°C
REVERSE CURRENT : IR(A)
FORWARD CURRENT : IF(A)
10
Tj = 125°C
1
Tj = 75°C
0.1
Tj = 25°C
0.01
Tj = 25°C
1000
Tj = 125°C
Tj = 150°C
100
Tj = 75°C
10
1
Tj = 25°C
0.1
Tj = 25°C
0.001
0.01
0
100
200
300
400
500
600
0
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
20
30
40
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
530
1000
Tj = 25°C
f = 1MHz
FORWARD VOLTAGE : VF(mV)
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
10
100
10
Tj=25°C
IF=2.0A
n=30pcs
525
520
515
510
505
Ave. : 497.1mV
500
495
490
485
0
5
10
15
20
25
30
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
VF DISPERSION MAP
2/5
2015.07 - Rev.A
Data Sheet
RB060MM-40TF
Electrical Characteristic Curves
500
45
REVERSE CURRENT : IR(A)
40
35
30
25
20
15
Ave. : 6.7A
10
460
440
420
400
380
360
320
300
0
280
IR DISPERSION MAP
Ct DISPERSION MAP
40
IFSM
300
1cyc
8.3ms
Ta=25°C
250
200
Ave. : 122A
150
100
50
REVERSE RECOVERY TIME : trr(ns)
400
PEAK SURGE
FORWARD CURRENT : IFSM(A)
Ave. : 333pF
340
5
350
Tj=25°C
f=1MHz
VR=0V
n=10pcs
480
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
Tj=25°C
VR=40V
n=30pcs
0
Tj=25°C
IF=0.5A
IR=1.0A
Irr / IR=0.25
n=10pcs
35
30
25
20
15
Ave. : 8.2ns
10
5
0
IFSM DISPERSION MAP
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
trr DISPERSION MAP
3/5
2015.07 - Rev.A
Data Sheet
RB060MM-40TF
Electrical Characteristic Curves
1000
IFSM
PEAK SURGE
FORWARD CURRENT : IFSM(A)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
1000
8.3 8.3
ms ms
1cyc
Ta=25°C
100
10
time
Ta=25°C
100
10
1
10
100
1
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
10
100
TIME : t(ms)
IFSM-t CHARACTERISTICS
1.0
3.0
Tj = 150°C
Tj = 150°C
2.5
0.8
REVERSE POWER
DISPERSION : PR (W)
FORWARD POWER
DISPERSION : PF (W)
1cyc
IFSM
2.0
D = 1/2
1.5
Sin(θ=180)
1.0
DC
0.5
0.6
Sin(θ=180)
0.4
D = 1/2
DC
0.2
0.0
0.0
0
1
2
3
0
4
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-PF CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
10
20
30
40
REVERSE VOLTAGE : VR(V)
VR-PR CHARACTERISTICS
4/5
2015.07 - Rev.A
Data Sheet
RB060MM-40TF
Electrical Characteristic Curves
6
Rth(j-a)
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
TRANSIENT
THERMAL IMPEDANCE : Rth (°C/W)
1000
100
Rth(j-c)
10
Glass epoxi mounted
IF=2A
IM=100mA
1
time
5
VR
4
t
T
D=t/T
VR=VRM/2
Tj=150°C
DC
3
D = 1/2
2
1
Sin(θ=180)
1ms 300s
0.1
0.001
0
0.01
0.1
1
10
100
0
1000
TIME : t(s)
Rth-t CHARACTERISTICS
25
50
75
100
125
150
AMBIENT TEMPERATURE : Ta(°C)
DERATING CURVE (Io-Ta)
30
6
No destruction at 30kV
IO
0A
0V
5
VR
4
t
DC
3
ELECTROSTATIC
DISCHARGE TEST : ESD(kV)
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
IO
0A
0V
T
D=t/T
VR=VRM/2
Tj=150°C
D = 1/2
2
Sin(θ=180)
1
0
25
20
15
10
5
0
0
25
50
75
100
125
C=200pF
R=0
C=100pF
R=1.5k
150
CASE TEMPERATURE : Tc(°C)
DERATING CURVE (Io-Tc)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
AVE. : 11.8kV
ESD DISPERSION MAP
5/5
2015.07 - Rev.A
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A