Schottky Barrier Diode Datasheet RB070MM-30TF Application AEC-Q101 Qualified Land Size Figure (Unit : mm) Dimensions (Unit : mm) General rectification 0.1±0.1 0.05 1.2 Features 1) Small power mold type 3.05 3.5±0.2 0.12 2.6±0.1 0.85 1.6±0.1 PMDU (PMDU) 2) High reliability 0.8±0.1 ROHM : PMDU JEDEC : SOD-123FL 3) Low VF Cathode Structure 0.9±0.1 : Manufacture Date Anode Taping Dimensions (Unit : mm) 1.81±0.1 4.0±0.1 0.25±0.05 3.71±0.1 φ1.55±0.05 1.550.05 2.0±0.05 3.5±0.05 4.0±0.1 8.0±0.2 Silicon epitaxial planar type 1.75±0.1 Construction φ1.0±0.1 1.00.1 1.5MAX Absolute Maximum Ratings (Tc= 25°C) Symbol Conditions Limits Unit Repetitive Peak Reverse Voltage VRM Duty≦0.5 30 V Reverse Voltage VR Direct Reverse Voltage 30 V Average Forward Rectified Current Io Glass epoxi mounted, 60Hz half sin Wave resistive load,Tc=115°C max. 1.5 A Non-repetitive Forward Current Surge Peak IFSM 60Hz half sin wave ,Non-repetitive at Ta=25°C 30 A Tj - 150 °C Tstg - 40 to 150 °C Parameter Operating Junction Temperature Storage Temperature Electrical Characteristics (Tj = 25°C) Parameter Forward Voltage Reverse Current www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Symbol Conditions Min. VF1 IF=0.5A - 0.37 0.43 V VF2 IF=1.5A - 0.44 0.49 V IR VR=30V - 9.0 A 1/5 Typ. Max. Unit 50 2015.07 - Rev.A Data Sheet RB070MM-30TF Electrical Characteristic Curves 100000 Tj = 150°C REVERSE CURRENT : IR(A) FORWARD CURRENT : IF(A) 10 Tj = 125°C 1 Tj = 75°C 0.1 Tj = 25°C 0.01 Tj = 25°C 1000 Tj = 125°C 100 Tj = 75°C 10 Tj = 25°C 1 0.1 Tj = 25°C 0.01 0.001 0 100 200 300 400 500 0 600 FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS 10 20 30 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 1000 470 Tj = 25°C f = 1MHz FORWARD VOLTAGE : VF(mV) CAPACITANCE BETWEEN TERMINALS : Ct(pF) Tj = 150°C 10000 100 10 0 10 20 460 455 450 AVE. : 441.5mV 445 440 435 430 30 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Tj=25°C IF=1.5A n=30pcs 465 VF DISPERSION MAP 2/5 2015.07 - Rev.A Data Sheet RB070MM-30TF Electrical Characteristic Curves 360 Tj=25°C VR=30V n=30pcs 35 30 25 20 AVE. : 9A 15 10 350 345 340 330 325 0 320 IR DISPERSION MAP Ct DISPERSION MAP 35 IFSM 300 1cyc 8.3ms Ta=25°C 250 200 AVE. : 96A 100 50 REVERSE RECOVERY TIME : trr(ns) PEAK SURGE FORWARD CURRENT : IFSM(A) 400 150 AVE. : 333pF 335 5 350 Tj=25°C f=1MHz VR=0V n=10pcs 355 CAPACITANCE BETWEEN TERMINALS : Ct(pF) REVERSE CURRENT : IR(A) 40 Tj=25°C IF=0.5A IR=1A Irr / IR=0.25 n=10pcs 30 25 20 15 AVE. : 9.3ns 10 5 0 0 IFSM DISPERSION MAP www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. trr DISPERSION MAP 3/5 2015.07 - Rev.A Data Sheet RB070MM-30TF Electrical Characteristic Curves 1000 IFSM PEAK SURGE FORWARD CURRENT : IFSM(A) PEAK SURGE FORWARD CURRENT : IFSM(A) 1000 8.3 8.3 ms ms 1cyc Ta=25°C 100 10 1cyc IFSM time Ta=25°C 100 10 1 10 100 1 NUMBER OF CYCLES IFSM-CYCLE 10 100 TIME : t(ms) IFSM-t CHARACTERISTICS 1.5 1 1 Tj = 150°C REVERSE POWER DISPERSION : PR (W) FORWARD POWER DISPERSION : PF (W) Tj = 150°C D = 1/2 Sin(θ=180) 0.5 DC 0.5 Sin(θ=180) D = 1/2 DC 0 0 0 1 2 0 3 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-PF CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 10 20 30 REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS 4/5 2015.07 - Rev.A Data Sheet RB070MM-30TF Electrical Characteristic Curves 4 Rth(j-a) 100 Rth(j-c) 10 Mounted on glass epoxy board IM=100mA IF=1A 1 time AVERAGE RECTIFIED FORWARD CURRENT : Io(A) TRANSIENT THERMAL IMPEDANCE : Rth (°C/W) 1000 IO 0A 0V 3 D=t/T VR=VRM/2 Tj=150°C T D = 1/2 2 Sin(θ=180) 1 1ms 300s 0.1 0.001 0 0.01 0.1 1 10 100 0 1000 TIME : t(s) Rth-t CHARACTERISTICS 4 VR T D=t/T VR=VRM/2 Tj=150°C D = 1/2 1 Sin(θ=180) 0 25 50 75 100 125 150 CASE TEMPERATURE : Tc(°C) DERATING CURVE (Io-Tc) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 100 125 150 25 20 15 AVE. : 8.7kV 10 5 0 0 75 No destruction at 30kV t DC 2 50 30 IO 0A 0V 3 25 AMBIENT TEMPERATURE : Ta(°C) DERATING CURVE (Io-Ta) ELECTROSTATIC DISCHARGE TEST : ESD(kV) AVERAGE RECTIFIED FORWARD CURRENT : Io(A) t VR DC C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP 5/5 2015.07 - Rev.A Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1102A