Part Number: LUYR37M T-1 (3mm) SOLID STATE LAMP www.SunLED.com Package Schematics Features ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant D E Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) L n UR (GaAsP/ GaP) UY (GaAsP/ GaP) Unit 30 30 mA Forward Voltage (Typ.) (IF=20mA) 140 mA 75 mW u S Forward Current IF Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 160 75 °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number Emitting Color Red Emitting Material UR (GaAsP/ GaP) UY (GaAsP/ GaP) Unit VF 2 2.1 V Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 627* 590* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=20mA) λD 617* 588* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △ λ 45 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 20 pF Operating Characteristics (TA=25°C) Lens-color GaAsP/GaP LUYR37M White Diffused Yellow GaAsP/GaP Luminous Intensity CIE127-2007* (IF=20mA) mcd Wavelength CIE127-2007* nm λP min. typ. 6 4* 13 9* 627* 4 4* 7 7* 590* Viewing Angle 2θ 1/2 60° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Dec 16,2013 SDSA3151 V6-X Layout: Maggie L. P. 1/3 Part Number: LUYR37M T-1 (3mm) SOLID STATE LAMP www.SunLED.com UR UY u S L n D E Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Dec 16,2013 SDSA3151 V6-X Layout: Maggie L. P. 2/3 Part Number: LUYR37M T-1 (3mm) SOLID STATE LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Dec 16,2013 SDSA3151 V6-X Layout: Maggie L. P. 3/3