Part Number: XZMDK46W-9 SUBMINIATURE SOLID STATE LAMP PRELIMINARY SPEC Features SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. Z-BEND LEAD. LONG LIFE-SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MDK (InGaAlP) Unit 1.95 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V 185 mA Reverse Current (Max.) (VR=5V) IR 10 uA PT 75 mW TA -40 ~ +85 Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 650 nm Tstg -40 ~ +85 Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 635 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 35 pF 5 V Forward Current IF 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Operating Temperature XZMDK46W-9 Unit VF VR Part Number MDK (InGaAlP) Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) Emitting Color Red Published Date : JAN 22,2008 Emitting Material InGaAlP °C Lens-color Water Clear Drawing No : XDSA1773 Luminous Intensity (IF=20mA) mcd Wavelength nm λP Viewing Angle 2 θ 1/2 min. typ. 480 1395 650 20° V6 Checked : Shin Chi P.1/4 Part Number: XZMDK46W-9 SUBMINIATURE SOLID STATE LAMP MDK Published Date : JAN 22,2008 Drawing No : XDSA1773 V6 Checked : Shin Chi P.2/4 Part Number: XZMDK46W-9 SUBMINIATURE SOLID STATE LAMP Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : JAN 22,2008 Drawing No : XDSA1773 V6 Checked : Shin Chi P.3/4 Part Number: XZMDK46W-9 SUBMINIATURE SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : JAN 22,2008 Drawing No : XDSA1773 XZMDK46W-9 V6 Checked : Shin Chi P.4/4