SunLED

Part Number: ZMYLA92S-4
3.5x3.5 mm SMD CHIP LED LAMP
www.SunLED.com
Features
3.5mm X 3.5mm X 1.15mm SMD LED
Applications
Zener diode provided for ESD Protection
IR-reflow compatible
Signal and symbol luminaire for orientation.
Ideal for accent lighting
Marker lights (e.g. steps, exit ways, etc).
Standard Package: 2,000pcs / Reel
Decorative and entertainment lighting.
MSL (Moisture Sensitivity Level): 2a
Commercial and residential lighting.
RoHS compliant
Automotive interior lighting.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
D
E
L
n
Package Schematics
u
S
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Dec 16, 2013
SDSA9173 V1-Z
Layout: Maggie L.
P. 1/6
Part Number: ZMYLA92S-4
3.5x3.5 mm SMD CHIP LED LAMP
www.SunLED.com
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
D
E
L
n
u
S
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise
pickup and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
Dec 16, 2013
SDSA9173 V1-Z
Layout: Maggie L.
P. 2/6
Part Number: ZMYLA92S-4
3.5x3.5 mm SMD CHIP LED LAMP
www.SunLED.com
Selection Guide
Part
Number
ZMYLA92S-4
Emitting
Color
Emitting
Material
Yellow
Lens-color
AlGaInP
Luminous Intensity
CIE127-2007*
(IF=150mA)[2]
cd
Luminous Flux
CIE127-2007*
(IF=150mA)[2]
lm
min.
typ.
min.
typ.
1.6*
2.69*
10*
13.7*
Water Clear
Viewing
Angle
2 θ 1/2 [1]
120°
Notes:
1. θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. LEDs are binned according to their luminous flux.
* Luminous intensity / luminous flux value is in accordance with CIE127-2007 standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Value
Unit
Power Dissipation
PD
495
mW
Junction Temperature [1]
TJ
110
°C
Operating Temperature
Top
-40 ~ +85
°C
Storage Temperature
Tstg
Reverse Voltage
L
n
DC Forward Current [1]
IF
Peak Forward Current [2]
Thermal Resistance [1]
(Junction/ambient)
Thermal Resistance [1]
(Junction/solder point)
D
E
VR
IFM
u
S
Rth j-a
Rth j-S
Electrostatic Discharge Threshold (HBM)
-40 ~ +85
°C
5
V
150
mA
270
mA
210
°C/W
70
°C/W
8000
V
Notes:
1.Results from mounting on PC board FR4(pad size ≥ 70mm 2 ), mounted on pc board-metal core PCB is recommend for lowest thermal Resistance.
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA = 25°C
Parameter
Wavelength at peak emission CIE127-2007* IF=150mA
Dominant Wavelength CIE127-2007*
IF=150mA
[Typ.]
[Typ.]
Spectral Line Half-width IF=150mA [Typ.]
Symbol
Value
Unit
λpeak
590*
nm
λdom [1]
590*
nm
Δλ
20
nm
Forward Voltage IF=150mA [Min.]
Forward Voltage IF=150mA [Typ.]
2.2
VF [2]
Forward Voltage IF=150mA [Max.]
2.7
V
3.3
Allowable Reverse Current [Max.]
IR
85
mA
Temperature coefficient of λpeak
IF=150mA, -10°C≤ T≤100°C
[Typ.]
TCλpeak
0.13
nm/ °C
Temperature coefficient of λdom
IF=150mA, -10°C≤ T≤100°C
[Typ.]
TCλdom
0.10
nm/ °C
Temperature coefficient of VF
IF=150mA, -10°C≤ T≤100°C [Typ.]
TCV
-1.9
mV/ °C
SDSA9173 V1-Z
Layout: Maggie L.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
* Wavelength is in accordance with CIE127-2007 standards.
Dec 16, 2013
P. 3/6
Part Number: ZMYLA92S-4
3.5x3.5 mm SMD CHIP LED LAMP
www.SunLED.com
YELLOW
MYLA
u
S
Dec 16, 2013
L
n
D
E
SDSA9173 V1-Z
Layout: Maggie L.
P. 4/6
Part Number: ZMYLA92S-4
3.5x3.5 mm SMD CHIP LED LAMP
www.SunLED.com
LED is recommended for reflow soldering and
soldering profile is shown below.
The device has a single mounting surface.
The device must be mounted according to
the specifications.
D
E
L
n
u
S
Reel Dimension
Recommended Soldering Pattern
Tape Specification (Units : mm)
Dec 16, 2013
SDSA9173 V1-Z
Layout: Maggie L.
P. 5/6
Part Number: ZMYLA92S-4
3.5x3.5 mm SMD CHIP LED LAMP
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
D
E
L
n
u
S
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes
Dec 16, 2013
SDSA9173 V1-Z
Layout: Maggie L.
P. 6/6