EMX2 / EMX3 / UMX2N / UMX3N / IMX2 / IMX3 Transistors General purpose (dual transistors) EMX2 / EMX3 / UMX2N / UMX3N / IMX2 / IMX3 !Features 1) Two 2SC2412AK chips in a EMT or UMT or SMT package. !Equivalent circuits EMX2 / UMX2N IMX2 (3) (4) (2) (1) (4) (5) (6) EMX3 / UMX3N (5) (6) (3) (2) (1) (3) (2) (5) (4) IMX3 (1) (4) (6) (5) (6) (2) (3) (1) !Absolute maximum ratings (Ta=25°C) Symbol Limits Unit Collector-base voltage Parameter VCBO 60 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 7 V IC 150 mA Collector current EMX2 / EMX3 / UMX2N / UMX3N Collector power dissipation 150(TOTAL) PC IMX2 / IMX3 Junction temperature Storage temperature mW 300(TOTAL) Tj 150 °C Tstg −55~+150 °C ∗1 ∗2 ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. !Electrical characteristics (Ta=25°C) Symbol Min. Typ. Max. Unit Collector-base breakdown voltage Parameter BVCBO 60 − − V IC=50µA Collector-emitter breakdown voltage BVCEO 50 − − V IC=1mA Emitter-base breakdown voltage Collector cutoff current BVEBO ICBO 7 − − − − 0.1 V µA IE=50µA VCB=60V IEBO − − 0.1 µA VEB=7V VCE(sat) − − 0.4 V IC/IB=50mA/5mA Emitter cutoff current Collector-emitter saturation voltage Conditions hFE 120 − 560 − Transition frequency fT − 180 − MHz Output capacitance Cob − 2 3.5 pF DC current transfer ratio ∗Transition frequency of the device. !Package, marking, and packaging specifications Type EMX2 EMX3 UMX2N UMX3N IMX2 IMX3 Package EMT6 EMT6 UMT6 UMT6 SMT6 SMT6 Marking Code X2 T2R X3 T2R X2 TR X3 TR X2 T108 X3 T108 Basic ordering unit (pieces) 8000 8000 3000 3000 3000 3000 VCE=6V, IC=1mA VCE=12V, IE=−2mA, f=100MHz VCB=12V, IE=0mA, f=1kHz ∗ EMX2 / EMX3 / UMX2N / UMX3N / IMX2 / IMX3 Transistors !External dimensions (Units : mm) EMX2 / EMX3 (2) (3) (4) 0.95 0.95 1.9 2.9 (1) (6) (5) 0.3 IMX2 / IMX3 1.6 ROHM : SMT6 EIAJ : SC-74 1.1 0~0.1 0.8 0.15 2.8 Each lead has same dimensions ROHM : UMT6 EIAJ : SC-88 1.3 2.0 0.65 (3) 0.9 0.7 0~0.1 0.15 0.5 Each lead has same dimensions 0.3Min. (2) 2.1 0.1Min. ROHM : EMT6 (1) 1.25 0.65 (1) 0.13 1.2 1.6 (5) (2) (6) (6) (3) (5) 0.2 (4) 0.5 0.5 1.0 1.6 0.22 (4) UMX2N / UMX3N Each lead has same dimensions Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0