CX11SM CRYSTAL 100 kHz to 180 kHz Low Profile, Ultra-Miniature Surface Mount Quartz Crystal ™ DESCRIPTION Actual Size Designed and manufactured in the USA, Statek’s CX11SM tuning-fork quartz crystal has an extremely small footprint (3.2 mm x 1.5 mm) and a very low profile (under 1 mm). For applications where space or mass are a premium, the small size and low mass of the CX11SM make it the ideal choice. Side View glass lid ceramic lid PACKAGE DIMENSIONS FEATURES Ultra-miniature (3.2 mm x 1.5 mm) Low profile (less than 1 mm) PR EL IM IN AR Y Low mass A Surface mount TOP BOTTOM Available with ceramic or glass lid D High shock and vibration survival Excellent aging characteristics B C Ideal for low power applications Full military testing available Designed and manufactured in the USA APPLICATIONS Medical CRM Infusion pumps Military & Aerospace TYPICAL MAXIMUM DIM inches mm inches mm A 0.127 3.20 0.135 3.43 B 0.060 1.50 0.068 1.73 C - - D 0.027 0.69 see below 0.037 0.94 THICKNESS (DIM C) MAXIMUM Combat identification systems Optical tags Industrial, Computer & Communications Transponder/Animal migration GLASS LID CERAMIC LID MAX inches mm inches mm SM1 0.034 0.87 0.035 0.90 SM2/SM4 0.034 0.87 0.035 0.90 SM3/SM5 0.036 0.91 0.037 0.94 SUGGESTED LAND PATTERN 0.040 (1.02) 0.075 (1.91) 0.086 (2.18) October 2006 - Rev A IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S inches (mm) SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Designation SM1 SM2 SM3 SM4 SM5 Fundamental Frequency Motional Resistance R1 100 kHz 20 kΩ Motional Capacitance C1 1.0 fF Quality Factor Q 70,000 Shunt Capacitance C0 0.8 pF Load Capacitance 9 pF (unless specified otherwise) Mass (SM1, ceramic lid) 12 mg Turnover Temperature1 (T0) 18 OC Termination Gold Plated Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) CONVENTIONAL CMOS PIERCE OSCILLATOR CIRCUIT Rf Frequency BUFFER -0.035 ppm/OC2 Temperature Constant (k) Standard Calibration Tolerance2 + _ Drive Level 30 ppm + _ 100 ppm + _ 100 ppm + _ 1000 ppm + _ 1000 ppm + _ 10000 ppm OSC Freq (fO ) RA AMPLIFIER PR EL IM IN AR Y Glass Lid: Ceramic Lid: 0.5 µW MAX Aging, first year 5 ppm MAX Shock, survival 5,000 g, 0.3 ms, 1/2 sine Vibration, survival 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) -55OC to +125OC 260OC for 20 sec. Storage Temp. Range Max Process Temperature CG CD EQUIVALENT CIRCUIT 1 C0 L1 C1 R1 2 1. Other turnover temperatures available. 2. Tighter tolerances available. R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance Note: The crystal frequency f as a function of temperature T follows the parabolic relationship f (T) = f (T0) [1 + k (T - T0)2], where T0 is the turnover temperature and k is the frequencytemperature constant (both given above). PACKAGING OPTIONS • Tray Pack • 16 mm tape, 7”or 13” reels Per EIA 481 (see Tape and Reel data sheet 10109) HOW TO ORDER CX11SM CRYSTALS CX11 S “S” if special or custom design. Blank if Std. C C = Ceramic Lid Blank = Glass Lid SM1 SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated Lead Free SM5 = Solder Dipped Lead Free – 100K Frequency K = kHz , 100 Calibration Tolerance @ 250C (in ppm) / I Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S October 2006 - Rev. A