ELECTRICAL GROUP PANDUCT ® Wiring Duct THE ORIGINAL WIRING DUCT T A E R G Accessory for Panel Fabrication! 1” Bend Radius Corner Strip for PANDUIT ® Wiring Duct Eases Routing of Wiring During Panel Fabrication ■ Creates strong, rigid corner at wiring duct junctions preventing duct finger or sidewall deflection and saving panel assembly time ■ Large 1” bend radius on inside corner to protect sensitive wiring or data cabling from being kinked or stressed ■ Available in pre-cut pieces for 1.0” – 4.0” duct height and in six foot lengths that can be cut to size to meet any size requirement ■ Easy to install, two piece snap-fit design ■ Compatible with PANDUIT Type G, F, E and D Wiring Duct Features, advantages and benefits: Creates a strong, rigid corner Prevents deflection of wiring duct fingers at corners due to stress applied during wiring installation. Duct cover can easily and quickly be installed after panel wiring is completed. Prevents wires from “jumping” out of duct channel when being pulled through panel during fabrication. 1" radius on inside corner Bend radius control for sensitive fiber optic and other high performance data cables. Reduces risk of damaging sensitive data or fiber optic cables routed through control panels. Five pre-cut sizes Pre-cut pieces already sized and ready to install for 1.0" – 4.0" high duct. No special cutting for all styles of PANDUIT wiring duct. Sturdy two-piece design Easily snaps or slides together at duct junction. Can easily be removed during panel modifications. Quick, easy installation and removal – no tools required. Compatible with PANDUIT Type G, F, E and D Wiring Duct Flexibility to use 1" Bend Radius Corner Strip with PANDUIT broad offerings of wiring duct. Consistency of workmanship and panel fabrication regardless of job. Sold exclusively through distribution to the Electrical OEM and Construction Markets Everywhere y ou need us! 1" Bend Radius Corner Strip for PANDUIT ® Wiring Duct Installation 1" Bend Radius Corner Strips should be installed before panel wiring is routed through duct. B The inside corner is secured in the assembled position by pushing or sliding the arrow shaped probe (A) into latch (B). A Dimensions 1.00 (25.40) 0.24 (6.10) 1.35 (34.36) Typ. H 0.12 (2.98) 0.07 (1.78) 0.48 (12.19) Tangent Dimensions in parenthesis are metric. Description Use with PANDUI T Type G, F, E and D Wiring Duct with Nominal Wall Height Strip Height H Cut-to-size 6 foot corner strip with a 1" bend radius All Sizes (Cut to duct height) 72" (1829) 1" Pre-cut corner strips with a 1" bend radius 1.5" Pre-cut corner strips with a 1" bend radius 2" Pre-cut corner strips with a 1" bend radius 3" Pre-cut corner strips with a 1" bend radius 4" Pre-cut corner strips with a 1" bend radius 1.00" 1.50" 2.00" 3.00" 4.00" 0.53" (13) 1.08" (27) 1.52" (39) 2.46" (63) 3.44" (87) Part Numbers CSC1LG6 CSPC1LG-Q CSPC1.5LG-Q CSPC2LG-Q CSPC3LG-Q CSPC4LG-Q Standard Standard Package Carton Qty. Qty. 6 ft. 25 25 25 25 25 pcs. pcs. pcs. pcs. pcs. 120 ft. 250 250 250 250 250 pcs. pcs. pcs. pcs. pcs. ORDERING INFORMATION: Order number of pieces required, in multiples of Standard Package Quantity. MATERIAL: Lead-free PVC. Colors 1" Bend Radius Corner Strips Standard Colors: LG Light Gray BL Black WH White All PANDUIT electrical products are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to the replacement of any product proved to be defective within 6 months (for product) or 90 days (for tools) from the date of delivery. Tool warranty is void if PANDUIT tools are modified, altered or misused in any way. Use of PANDUIT tooling with any product other than the specified PANDUIT products for which the tool was designed, constitutes misuse. Before using, user shall determine the suitability of the product for his intended use and user assumes all risk and liability whatsoever in connection therewith. This warranty is made in lieu of and excludes all other warranties, expressed or implied. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE SPECIFICALLY Substitute LG in part number with BL (Black) or WH (White) for desired color. CSPC available in LG (Light Gray) only. Colors shown are approximate. EXCLUDED. Neither seller nor manufacturer shall be liable for any other injury, loss or damage, whether direct or consequential, arising out of the use of, or the inability to use, the product. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements consult the factory. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. ELECTRICAL GROUP PANDUIT CORP. PANDUIT CANADA Tinley Park, Illinois, USA 140 Amber Street Markham, Ontario L3R 3J8 For Customer Service, contact Phone: 800-777-3300 Fax: 708-532-1811 For Technical Support, contact Phone: 866-405-6654 Email: [email protected] Website: www.panduit.com/eg WORLDWIDE SUBSIDIARIES AND SALES OFFICES For Pricing and Further Information — Contact your local PANDUIT Distributor or Sales Office © PANDUIT Corp. 2002 ALL RIGHTS RESERVED SA-EL02CB02C Printed in U.S.A.