DATA SHEET SKY13445-000: Dual-Band SP3T and SP2T Switch Applications Features TX2 RX2 BT SP3T (2 GHz) and SP2T (5 GHz) switches with Bluetooth® capability Positive voltage control: 2.7 to 3.6 V IP0.5dB: +29.5 dBm typical @ 2.5 GHz and 3 V Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. 1 ANT5 13 11 12 VC1 ANT2 VC3 2 VC4 BT 3 VC5 10 4 RX5 TX5 5 GND 6 ANT2 VC1 VC2 Bare, 13-pin pHEMT die: 806 x 496 x 127 μm ANT5 VC2 TX2 RX2 7 8 9 S3530 Figure 2. SKY13445-000 Pinout – 13-Pin Bare Die (Top View) VC5 TX5 RX5 VC3 VC4 WLAN 802.11 a/b/g/n/ac wire bond modules Embedded modules S3392 Figure 1. SKY13445-000 Block Diagram Description The SKY13445-000 is a pHEMT GaAs die. The device includes a Single-Pole, Triple-Throw (SP3T) switch for 2 GHz WLAN transmit, receive, and Bluetooth functions, and a Single-Pole, DoubleThrow (SP2T) switch for 5 GHz transmit and receive functions. Any of the RF ports can be used for any RF function regardless of the port name. The SKY13445-000 requires external DC blocking capacitors on all RF ports. Both the SP3T and SP2T switches are fabricated on the same substrate. The active path is selected with five positive voltage control lines (V1, V2, and V3 for low band switching, and V4 and V5 for high band switching). In low band mode, the high band paths are in isolation by applying a low voltage to the two control lines, V4 and V5. The switch is manufactured in a compact, 13-pin 806 x 496 μm die. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202907B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2013 1 DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH Table 1. SKY13445-000 Signal Descriptions Pin # Description Pin # Name Description 1 ANT5 4.9 to 6.0 GHz antenna port. Must be DC blocked for proper operation. 8 TX2 2.4 to 2.5 GHz transmit port. Must be DC blocked for proper operation. 2 VC4 Control line 4 for ANT5 to RX5 path 9 RX2 2.4 to 2.5 GHz receive port. Must be DC blocked for proper operation. 3 VC5 Control line 5 for ANT5 to TX5 path 10 BT Bluetooth RF port. Must be DC blocked for proper operation. 4 RX5 4.9 to 6.0 GHz receive port. Must be DC blocked for proper operation. 11 VC3 Control line 3 for ANT2 to RX2 path 5 GND Ground 12 ANT2 2.4 to 2.5 GHz antenna port. Must be DC blocked for proper operation. 6 TX5 4.9 to 6.0 GHz transmit port. Must be DC blocked for proper operation. 13 VC1 Control line 1 for ANT2 to BT path VC2 Control line 2 for ANT2 to TX2 path 7 Note: Name Bottom of chip is electrically isolated and may be connected with conductive or non-conductive epoxy. Table 2. SKY13445-000 Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units –0.5 +5.0 V +31 +29 dBm dBm Control voltage (room temperature, normal operating power) VCTL RF input power (OFDM modulated): 2.5 GHz, SP3T switch 5 GHz, SP2T switch PIN2G PIN5G Storage temperature TSTG –55 +150 C Operating temperature TOP –30 +90 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13445-000 are provided in Table 2. Electrical specifications are provided in Tables 3 and 4. The state of the SKY13445-000 is determined by the logic provided in Table 5. Typical performance characteristics of the SKY13445-000 are illustrated in Figures 3 to 10. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 September 24, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202907B DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH Table 3. SKY13445-000 Electrical Specifications (Note 1) (VCTL = 0 V [Low] and 3 V [High], TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 0.7 0.9 dB 2 GHz SP3T Insertion loss, 2 GHz IL ANT2 to RX2, TX2, and BT; f = 2.4 to 2.5 GHz Return loss (insertion loss state), 2 GHz RL ANT2 to RX2, TX2, and BT; f = 2.4 to 2.5 GHz 14 18 dB Isolation, 2 GHz Iso ANT2 to RX2, TX2, and BT; one path closed; f = 2.4 to 2.5 GHz 18 24 dB Antenna isolation, 2 GHz Iso One 2 GHz path closed, f = 2.4 to 2.5 GHz 20 22 dB TX2 path closed, f = 4.8 to 5.0 GHz 20 22 dB 50 ns +20 +22 dBm +27.0 +29.5 dBm Switching speed ANT2 to ANT5: 50% control to 90/10% RF steady state power Error Vector Magnitude EVM Input power for 2.5% error, WLAN 2.45 GHz, 802.11g, OFDM, 54 Mbps, 64 QAM 0.5 dB Input Compression Point IP0.5dB f = 2.5 GHz Insertion loss, 5 GHz IL ANT5 to RX5 and TX5, f = 4.9 to 5.9 GHz 1.20 Return loss (insertion loss state), 5 GHz RL ANT5 to RX2 and TX2, f = 4.9 to 5.9 GHz 13 dB Isolation, 5 GHz Iso ANT5 to RX5, or ANT2 to TX5; one path closed; f = 4.9 to 5.9 GHz 15.0 20.5 dB Antenna isolation, 5 GHz Iso ANT2 to ANT5, one 5 GHz path closed, f = 4.8 to 5.9 GHz 15 20 dB 50 ns +17.5 +19.0 dBm +26 +28 dBm 5 GHz SP2T Switching speed 50% control to 90/10% RF steady state power Error Vector Magnitude EVM Input power for 2.5% error, WLAN 4.9 to 6.0 GHz, 802.11g, OFDM, 54 Mbps, 64 QAM 0.5 dB Input Compression Point IP0.5dB f = 5.0 GHz 1.35 dB Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202907B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2013 3 DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH Table 4. SKY13445-000 Electrical Specifications (Note 1) (VCTL = 3 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Control voltage: Low High VCTL_L VCTL_H Leakage current ILEAK Test Condition Min Typical Max Units 0 2.7 3.0 0.2 5.0 V V 15 30 μA VC1/2/3/4/5 = 3 V Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 5. SKY13445-000 Truth Table (Note 1) Control Signal Logic Function Insertion Loss/Isolation State VC1 (Pin 13) VC2 (Pin 7) VC3 (Pin 11) VC4 (Pin 2) VC5 (Pin 3) ANT2 to BT ANT2 to TX2 ANT2 to RX2 ANT5 to Rx5 ANT5 to TX5 ANT2 to BT 1 0 0 0 0 Insertion Loss Isolation Isolation Isolation Isolation ANT2 to TX2 0 1 0 0 0 Isolation Insertion Loss Isolation Isolation Isolation ANT2 to RX2 0 0 1 0 0 Isolation Isolation Insertion Loss Isolation Isolation ANT5 to RX5 0 0 0 1 0 Isolation Isolation Isolation Insertion Loss Isolation ANT5 to TX5 0 0 0 0 1 Isolation Isolation Isolation Isolation Insertion Loss ANT2 to BT, ANT5 to RX5 1 0 0 1 0 Insertion Loss Isolation Isolation Insertion Loss Isolation ANT2 to BT, ANT5 to TX5 1 0 0 0 1 Insertion Loss Isolation Isolation Isolation Insertion Loss ANT2 to TX2, ANT5 to RX5 0 1 0 1 0 Isolation Insertion Loss Isolation Insertion Loss Isolation ANT2 to TX2, ANT5 to TX5 0 1 0 0 1 Isolation Insertion Loss Isolation Isolation Insertion Loss ANT2 to RX2, ANT5 to RX5 0 0 1 1 0 Isolation Isolation Insertion Loss Insertion Loss Isolation ANT2 to RX2, ANT5 to TX5 0 0 1 0 1 Isolation Isolation Insertion Loss Isolation Insertion Loss Note: Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 September 24, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202907B DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH Typical Performance Characteristics (VCTL = 0 V [Low] and 3 V [High], TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) –10 0 –0.2 –15 –0.6 Return Loss (dB) Insertion Loss (dB) –0.4 –0.8 –1.0 –1.2 –1.4 –1.6 ANT2 to BT ANT2 to RX2 ANT2 to TX2 –1.8 –2.0 2.0 2.5 3.0 3.5 –20 –25 –30 ANT2 to RX2 ANT2 to BT ANT2 to TX2 –35 –40 2.0 4.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (GHz) Frequency (GHz) Figure 4. Typical Input Return Loss vs Frequency (2 GHz, SP3T) Figure 3. Typical Insertion Loss vs Frequency (2 GHz, SP3T) –10 0 –0.2 –0.4 Insertion Loss (dB) Isolation (dB) –15 –20 –25 –30 ANT2 to RX2 ANT2 to TX2 ANT2 to BT ANT2 to ANT5 –35 –40 2.0 2.5 3.0 3.5 4.0 4.5 –0.6 –0.8 –1.0 –1.2 –1.4 –1.6 ANT5 to RX5 ANT5 to TX5 –1.8 –2.0 4.0 5.0 4.5 0 0 –5 –5 –10 –10 Isolation (dB) Return Loss (dB) 5.5 6.0 Figure 6. Typical Insertion Loss vs Frequency (5 GHz, SP2T) Figure 5. Typical Isolation vs Frequency (2 GHz, SP3T) –15 –20 –25 –15 –20 –25 –30 –30 ANT5 to RX5 ANT5 to TX5 –35 –40 4.0 5.0 Frequency (GHz) Frequency (GHz) –40 4.5 5.0 5.5 Frequency (GHz) Figure 7. Typical Input Return Loss vs Frequency (5 GHz, SP2T) ANT5 to RX5 ANT5 to TX5 –35 6.0 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) Figure 8. Typical Isolation vs Frequency (5 GHz, SP2T) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202907B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2013 5 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 EVM (%) EVM (%) DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH 3.0 2.5 2.0 1.5 2.5 2.0 1.5 BT RX2 TX2 1.0 0.5 0 +10 3.0 +12 +14 +16 +18 +20 +22 RX5 TX5 1.0 0.5 +24 Burst Power (dBm) Figure 9. Typical EVM vs Burst Power @ 2500 MHz 0 +10 +12 +14 +16 +18 +20 +22 Burst Power (dBm) Figure 10. Typical EVM vs Burst Power @ 5500 MHz Evaluation Board Description Package and Handling Information The SKY13445-000 Evaluation Board is used to test the performance of the SKY13445-000 Dual-Band Switch. An Evaluation Board schematic diagram is provided in Figure 11. An assembly drawing for the Evaluation Board is shown in Figure 12. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions Typical case markings are shown in Figure 13. Package dimensions for the bare die are shown in Figure 14, and group ring dimensions are provided in Figure 15. The SKY13445-000 can be mounted with either conductive or non-conductive epoxy. Care must be taken when attaching this product, whether it is done manually or in a production environment. Production quantities of this product are shipped on a grip ring with exposed UV tape. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 September 24, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202907B DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH C8 47 pF C6 22 pF 4.9-6.0 GHz Antenna 2.4-2.5 GHz Antenna C5 22 pF C10 47 pF 1 ANT5 to RX5 Control Line C11 47 pF ANT5 to TX5 Control Line ANT5 2 VC4 3 VC5 13 12 11 VC1 ANT2 VC3 BT 4 C4 22 pF ANT2 to RX2 Control Line C7 22 pF C12 47 pF 4.9-6.0 GHz Receive ANT2 to BT Control Line RX5 GND 5 TX5 Bluetooth RF 10 VC2 TX2 RX2 7 8 9 6 C1 22 pF 2.4-2.5 GHz Receive C2 22 pF 2.4-2.5 GHz Transmit C9 47 pF ANT2 to TX2 Control Line C3 22 pF 4.9-6.0 GHz Transmit S3528 Figure 11. SKY13445-000 Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 7 September 24, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202907B DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH 1 2 3 4 5 6 S3395 Figure 12. SKY13445-000 Evaluation Board Assembly Diagram Figure 13. Typical Case Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 September 24, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202907B 0.323 0 0.062 0.164 0.052 Sq. Pins (13X) 3X 0.327 DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH 0.248 0.171 0.072 0.012 0.096 0.172 0.248 0.127 ± 0.010 0.012 0.100 0.197 0.295 0.324 0.403 0.192 0.403 0.326 2X 0.175 0.170 0 0.042 0.154 3X 0.175 Side View Top View All measurements are in millimeters S3529 Figure 14. SKY13445-000 13-Pin Die Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202907B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2013 9 DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH 202.5 210.3 195.0 202.6 6.0 Wafer Flat 6.0 Label Inner Ring Notes: 1. All dimensions in millimeters. 2. Tape material: exposed UV tape. 3. Tape adhesion: ≤30 gm/in. Outer Ring Grip Ring Number: GRP-2620-6 S2347 Figure 15. SKY13445-000 Grip Ring Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 September 24, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202907B DATA SHEET • SKY13445-000 DUAL-BAND, SP3T AND SP2T WLAN SWITCH Ordering Information Model Name SKY13445-000 Dual-Band SP3T and SP2T Switch Manufacturing Part Number SKY13445-000 Evaluation Board Part Number SKY13445-000-EVB Copyright © 2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202907B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2013 11