PHOBOS-R 2 to 18GHz Threat Warner/RESM System Technical Datasheet QR020-M1 Features 2-18GHz Instantaneous Frequency Range Full 360º Azimuth Coverage Bearing Accuracy <10º rms Extremely small Size & Weight Very Low Power Consumption (<25Watt) Rapid Threat Warning (Emitter ID < 1sec) No External RF Cables Simple to Deploy & Operate Built in auto-positioning (Compass / GPS) Minimal Operator Workload Network enabled connectivity Applications Unmanned Aerial Vehicles Man Portable / Deployable Sensors Remote Sensing (Unmanned) Armoured Fighting Vehicles Fast Patrol Boats – Littoral / EEZ Operations Reconnaissance Vehicles Light Utility Aircraft (FW & RW) Low Cost Combined Sensor Suites Product Description The Phobos-R Threat Warner/RESM is an extremely compact, affordable, end-to-end integrated EW sensor system comprising: Antennas, RF Processing, Digital Processing, De-interleaving & Emitter ID/Library Matching, and Operator Interface. The system design employs a high degree of RF & digital signal processing integration, (based on established Teledyne RR017 and QR020 PHOBOS products), enabling the full 2-18GHz frequency coverage and 360º azimuth coverage to be achieved in a very small and light-weight unit. A key feature of the Phobos-R is that there are no external RF cables and no positional alignment requirements during set-up, making it extremely easy to deploy and operate on a wide variety of small platforms of all types, including those not thought previously feasible for such protection on the grounds of size, weight, power or cost. Only two external cables are required for system operation; DC power (9v–36v) and a network cable for data output/system control. The system includes options for both WiFi & quad band GSM interfaces, enabling either local or remote location of the sensor unit relative to the user interface. The sensor system incorporates established waveform based processing algorithms enabling the creation of a user interface which is both robust in dense signal environments and requires minimal operator workload or training. Simple to use hand-held ruggedised PDA MMI display & full ESM MMI running on a ruggedised laptop or conventional displays are also available. MIL-STD 2525 symbology ensures ease of object recognition. The rapid threat warning response (<1 sec) also facilitates use of the system in conjunction with self-protection measures such as automatically set-on responsive jammers (ECM / EA) and it can also be used in conjunction with CESM as a frequency extension for low cost combined EW sensor suites. Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire UK, BD17 7SW QR020-M1 rev 2.1 August 2012 Page 1 of 4 © Teledyne Defence Ltd, 2012. All rights reserved. Tel: +44 (0) 1274 531 602 Fax:+44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk PHOBOS-R 2 to 18GHz Threat Warner/RESM System Technical Datasheet QR020-M1 Performance Data Frequency Range: Frequency Measurement: Azimuth Coverage: Bearing Measurement: Amplitude Measurement: System Sensitivity: 2.0GHz to 18GHz 25MHz resolution 360 Degrees < 10 Degrees 0.2 dB -57dBm -60dBmi Dynamic Range: 62dB 42dB 75ns 10ns 500ns max > 1 million pulses per sec 5,000 emitter mode lines 500 simultaneous tracks 500 simultaneously displayed Map with emitter LOB overlay / polar LOB mode / 2D Graph mode < 1 second 9 VDC to 36 VDC 24 Watt typical < 10 Watt 320mm x 320mm x 105mm < 8.5 litres < 7.2kg -20 Deg C to + 85 Deg C Minimum Pulse Width: Time Of Arrival : Recovery Time: Environment Pulse Density: Emitter Library Capacity: Track Table: Track Display: Full ESM MMI Display Modes: System Response Time: Operating Voltage Range: Power Consumption: Standby Mode: Size: Volume: Weight: Operating Temperature Range: Operating Altitude: (instantaneous coverage) (accuracy < 10MHz rms) (4 switched 90 degree sectors) (typical rms accuracy with small antennas) (resolution of the measurement process) (minimum sensitivity at Rx I/P) (typical sensitivity performance at Antenna boresight) (Auto attenuation selected) (Auto attenuation off) (Max Pulse Width is 650 µs / CW) (measurement resolution) (from max high power signal) (capable of expansion) (capable of expansion) (30 with a Handheld PDA display) Track Table, Platform data, Weapon data, System Control (antenna to display) (any DC power source in the range) (in full operating mode) (low power standby mode) (inc antennas) (inc antennas) (inc antennas) (optional heating element down to -4O Deg C) 60,000 feet max System Options 8-Port Antenna configuration Raw Pulse Data Capture Higher System Sensitivity MMI Display Extended Frequency Coverage Increased frequency performance RF Front-End interference rejection Solar Power Pack Remote operation for higher bearing accuracy / larger platform distributed antenna fits for off-line ELINT analysis using alternative platform mounted antennas Hand Held PDA, Rugged Laptop (HCI) or conventional display 0.5 to 18GHz achievable with DR063 unit / above 18GHz also available 12.5 MHz resolution and 6.25 MHz resolution custom filtering solutions available to suit requirements For unattended remote operation without local infrastructure WiFi & Quad-Band GSM QR020-M1 rev 2.1 August 2012 Page 2 of 4 © Teledyne Defence Ltd, 2012. All rights reserved. PHOBOS-R 2 to 18GHz Threat Warner/RESM System Technical Datasheet QR020-M1 Phobos-R integrated Sensor mounted on mast-top QR020-M1 rev 2.1 August 2012 Page 3 of 4 © Teledyne Defence Ltd, 2012. All rights reserved. PHOBOS-R 2 to 18GHz Threat Warner/RESM System Technical Datasheet QR020-M1 Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park Charlestown Shipley, West Yorkshire UK, BD17 7SW Tel: +44 (0) 1274 531 602 Fax:+44 (0) 1274 595 724 Email: [email protected] www.teledynedefence.co.uk Datasheet may be subject to change © Teledyne Defence Ltd, 2012. All rights reserved.