200 Series Mounting Base Options System Sensor mounting bases and kits provide a variety of installation options for detectors in any application. Features • Bases enable quick and secure detector plug-in • SEMS screws provide easy wiring connection • Support for 12-24 AWG provides installation flexibility • Multiple accessory options provide mounting flexibility • Sounder bases are compliant with UL 464 and UL 268 To meet local code and application requirements, System Sensor offers relay, isolator, and sounder base options for 200 Series detectors. Relay bases provide one form C contact relay for control of auxiliary functions, such as door closure and elevator recall. Isolator bases allow loops to continue to operate under fault conditions and automatically restore when the fault is removed. Sounder bases are available in a combination temporal 3 and continuous tone model (B200SR) or an addressable model (B200S) that can be activated by the fire alarm control panel based on the event.† 200 Series Bases provide a variety of mounting options to meet your installation challenges. Bases come in flanged or flangless versions for mounting to a variety of junction boxes. See the 200 Series Junction Box Selection Guide on the next page for junction box options. Surface mounting boxes are also available. Agency Listings Model Listings B501 UL, ULC,* FM, CSFM B210LP UL, ULC, FM, CSFM B200S UL, ULC, FM, CSFM B200SR UL, ULC, FM, CSFM B224RB UL, ULC, FM, CSFM B224BI UL, ULC, FM, CSFM * For ULC-listed products, add “A” to the model number (e.g., B501A). Consult your fire alarm control panel manufacturer for compatibility with the addressable model of the sounder base. † Specifications – 200 Series Bases Physical Specifications Diameter Wire Gauge Temperature Range B501: 4.1" (104 mm); B210LP: 6.1" (155 mm); B224BI, B224RB, B200SR, B200S: 6.875" (175 mm) B224BI, B224RB, B200SR, B200S, B210LP, B501: 24 to 12 AWG Refer to applicable sensor Operating Temperature Range using the Base/Sensor Cross Reference Chart at systemsensor.com Humidity Range 10% to 93% RH non-condensing B224RB/B224BI Electrical Ratings B200SR/B200S Electrical Ratings Operating Voltage 15 to 32 VDC (powered by SLC) External Supply Voltage 16 to 33 VDC (VFWR) Standby Current 170/450 µA max. Standby Current 500 µA max. Set Time (B224RB only) Short Delay: 60 to 100 msec Long Delay: 6 to 10 sec Reset Time (B224RB only) 20 msec max. Relay Characteristics 2 coil latching relay Sound Output Greater than 90 dBA measured in anechoic (B224RB only) 1 Form C contact room at 10 feet, 24 volts. 85 dBA minimum UL/ULC Rating: in UL reverberant room 0.5 A @ 125 VAC Alarm Current 35 mA max. 0.9 A @ 125 VDC 3 A @ 30 VDC 200 Series Junction Box Selection Guide Model Single Gang 3.5" Octagonal 4" Octagonal 4" Square 4" Square* 50 mm 60 mm 70 mm 75 mm B501 No Yes No No Yes Yes Yes Yes No B210LP Yes Yes Yes Yes Yes No No Yes No B224RB Yes No Yes Yes Yes No No Yes No B224BI Yes No No Yes Yes No No Yes No B200SR/B200S Yes Yes† Yes Yes Yes† No No Yes No * with 3.0" mud ring † B200SA is not compatitble with this junction box Note: Box depth contingent on base and wire size. Refer to National Electric Code or applicable local codes for appropriate recommendations. Ordering Information, 200 Series Bases Model B501* B501BP* B210LP* B210LPBP* B200SR* Description 4" Flangeless Mounting Base 4" Flangeless Mounting Base Bulk Pack 6" Flanged Mounting Base 6" Flanged Mounting Base Bulk Pack Standard Sounder Base (Compatible with B501BH Series) B200S* Intelligent Addressable Sounder Base B224RB* Relay Base B224BI* Isolator Base 200 Series Accessories SMB600 Surface Mounting Kit (flanged) F110 Accessory Flange Ring for 6" Base F110BP Accessory Flange Ring for 6" Base Bulk Pack F210 Accessory New Smaller Flange Ring for 6” Base RA100Z* Remote LED Annunciator M02-04-00 Detector Test Magnet M02-09-00 Test Magnet with Telescoping Handle XR2B Detector Removal Tool (T55-127-000 included) XP-4 Extension Pole for XR2B (5 to 15 ft.) T55-127-000 Detector Removal Head BCK-200B Black Detector Kit WCK-200B White Detector Kit B200S Addressable Sounder Base Product Overview When used with compatible fire alarm control panels, the B200S sounder base provides unmatched flexibility to configure the output to various events. When combined with System Sensor SpectrAlert® Advance notification appliances, the B200S can serve as a UL464 compliant component of the general evacuation signaling, improving aesthetics and reducing system costs. Features*: • S imple addressing scheme - base adopts the same address as attached sensor • Synchronizable with SpectrAlert Advance notification appliances • Four standard tone patterns at two selectable volumes • Custom tone capability • Support for Temporal-4 CO annunciation * Note: Some features are dependent on Fire Alarm Panel programming. Consult your Fire Alarm Panel manual for more information on the capabilities of your system. * Add “A” to model number for ULC-listed product (e.g., B501A) 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 www.systemsensor.com ©2012 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. SPDS13801 • 09/12