EBS101 ~ EBS107 Voltage 50V ~ 1000V 1.0 Amp Silicon Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES EBS Ideal for printed circuit board Lead tin plated copper Reliable low cost construction utilizing molded plastic technique results in inexpensive product MECHANICAL DATA Polarity:Symbol molded on body Mounting position :Any PACKAGE INFORMATION Package MPQ Leader Size EBS 5K 13 inch REF. A B C D Millimeter Min. Max. 4.9 5.1 6.0 6.4 3.9 4.1 3.2 3.5 REF. E F G H Millimeter Min. Max. 0.6 0.7 5.3 5.5 1.15 1.27 0.15 0.25 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol EBS 101 EBS 102 EBS 103 EBS 104 EBS 105 EBS 106 EBS 107 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Output Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 1A Maximum DC Reverse Current at Rated DC Blocking Voltage TJ=25°C Typical Thermal resistance junction to case 1 1 Typical Thermal resistance junction to Ambient Operating and Storage temperature range 1 A IFSM 30 A VF 1.1 V IR TJ=100°C Typical Thermal resistance junction to Lead IF 1 5 200 μA RθJC 20 °C / W RθJL 22 °C / W RθJA 42 °C / W TJ,TSTG -55~150 °C Note: 1. Thermal Resistance test performed in accordance with JESD-51. Unit mounted on Aluminum substrate _ 15 x 15 x 1.6mm. http://www.SeCoSGmbH.com/ 23-Dec-2014 Rev. B Any changes of specification will not be informed individually. Page 1 of 2 EBS101 ~ EBS107 Elektronische Bauelemente Voltage 50V ~ 1000V 1.0 Amp Silicon Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 23-Dec-2014 Rev. B Any changes of specification will not be informed individually. Page 2 of 2