Product Data Sheet Legacy - ET-9RG Legacy - 9 Port Industrial Ethernet Ring Switch with Gigabit Overview The ET-9RG is a 9 port industrial Ethernet Real-time Ring™ switch that provides super-fast, fault-tolerant network redundancy using rings to ensure your critical real-time system stays running. The Real-time rings self-configure and work right out of the box, without the need for complex configuration steps making them truly plug and play. The ET-9RG is also designed to be rugged and ultra-reliable. The ruggedness comes from its wide operating temperature range, industrial ratings (UL, CE, marine, hazloc, etc.) plus Sixnet's 25+ years of expertise in designing truly industrial rated products. The reliability is field proven with over 1,000,000 service-free hours (MTBF) based on real-world data of thousands of switches currently in the field. SIXNET industrial Ethernet switches are the toughest and most reliable with a unique 20-year support and service promise! PRODUCT HIGHLIGHTS Truly rugged design with -40 to 85°C operation Pre-configured for plug and play simplicity Link loss recovery of 30 mS + 5 mS per hop! Compact, low-profile packaging that fits in tight spaces and shallow enclosures Features ADVANCED HARDWARE FEATURES Nine Ethernet Ports that are fully IEEE 802.3 compliant Six 10/100 RJ45 ports that are auto-detecting, auto-crossover and auto-polarity Up to three 10/100/1000 RJ45 ports that are auto-detecting, auto-crossover and auto-polarity Up to two 1000 Mbps fiber optic ports for distances up to 80 km Self-test / alarm output for reporting errors Dual redundant power inputs with industrial surge and spike protection DIN rail or direct panel mounting (no extra kits required) REAL-TIME PERFORMANCE Real-time Ring™ for ultra-fast fault-tolerant loops Link loss recovery of 30 mS + 5 mS per hop! Priority Queuing (QoS/CoS) for real-time operation Modbus over Ethernet monitoring - use Modbus to monitor power and ring status Free and easy to use Windows configuration utility (Optional: only needed for advanced operation; the switch and rings are plug & play and work right out of the box!) Message filtering to prevent broadcast storms Store and forward wire speed switching - no delays! TRUE INDUSTRIAL DESIGN FOR LONG-TERM RELIABILITY TRUE INDUSTRIAL DESIGN FOR LONG-TERM RELIABILITY Ultra-reliable with 1,000,000+ service-free hours (MTBF) Free field-installable upgrades forever Unique 20-year support and service policy Industrial -40 to +85°C operating range UL, CSA (CUL), & CE certified DNV marine & offshore rated Hazardous locations rated for Class I, Div. 2 (Zone 2) areas Specs GENERAL Operation: Store and forward wire speed switching, non-blocking Modes: Full or half duplex operation with flow control supported on all ports Memory Bandwidth: 32 Gbps Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time) Ethernet Isolation: 1500 Vrms 1 minute RJ45 COPPER PORTS RJ45 Ports: Up to nine RJ45 ports that are fully IEEE 802.3 compliant RJ45 Speed & Duplex: Configurable or auto-detecting for speed & duplex (full or half), ports 1-6 are 10/100, port 7 and optionally 8 & 9 are 10/100/1000 RJ45 MDI/MDIX: Auto-mdi/mdix-crossover automatically supports either straight or crossed cables RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs FIBER OPTIC PORTS Fiber Optic Ports: Up to two 1000 Mbps fiber optic ports for distances up to 80 km> Transceivers: SFP (mini-gbic pluggable) with LC style connectors Multimode: Links up to 550 m typical; 850 nm; use with 50-62.5/125 um fiber Standard "M" option Transmitter power (dB): -9 min, -3 max Receiver sensitivity (dB): -18 max Multimode Long Haul: Links up to 2 km typical; 1310 nm; use with 50-62.5/125 um fiber Special Order Transmitter power (dB): -9 min, -3 max Receiver sensitivity (dB): -20 max Singlemode: Links up to 10 km typical; 1310 nm; use with 9/125 um fiber Standard "S" option Transmitter power (dB): -9 min, -3 max Receiver sensitivity (dB): -20 max Singlemode LongHaul: Links up to 30 km typical; 1310 nm; use with 9/125 um fiber Special Order Transmitter power (dB): -4 min, -2 max Receiver sensitivity (dB): -23 max Singlemode LongHaul = Links up to 50 km typical; 1550 nm; use with 9/125 um fiber Special Order Transmitter power (dB): -4 min, -2 max Receiver sensitivity (dB): -23 max Singlemode LongHaul Links up to 80 km typical; 1550 nm; use with 9/125 um fiber Special Order Transmitter power (dB): 0 min, +5 max Receiver sensitivity (dB): -23 max Other transceivers - Contact SIXNET for special application transceivers Eye safety - IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11 NETWORKING FEATURES Devices Supported: All IEEE 802.3 compliant devices are supported Protocols & Features: All IEEE 803.2, Real-time Ring™, QoS/CoS/ToS/DS, port mirroring, broadcast storm protection, Modbus monitoring Real-time Ring™: Maximum recommended switches in a ring: 50 for best performance but more is possible Dual ring support: Yes Link loss recovery time: 30 mS plus 5 mS per hop Industrial Protocols Supported: Modbus/TCP, EtherNet/IP, PROFInet, Foundation Fieldbus HSE and others Standards: IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3z Management Interfaces: Free Windows configuration utility (only needed to configure advanced capabilities such as QoS, port mirrioring, Modbus monitoring POWER AND ALARM OUTPUT Power Input: Dual redundant power inputs for redundant power supplies Input Voltage Range: 10 to 30 VDC Power Consumption: 8.0 W typical with all ports linked and active Industrial surge and spike protection: 15 kW peak, 5 kW (10 times for 10 us) Self-test / Alarm Output: Same voltage as power input; 0.5 Amps max. ENVIRONMENTAL Operating Temperature: -40 to 85°C (cold startup at -40°C) Storage Temperature: -40 to 85°C Humidity: 5 to 95% RH (non-condensing) Vibration: IEC68-2-6 Shock: IEC68-2-27 Freefall: IEC68-2-32 STANDARDS AND CERTIFICATIONS Electrical Safety: UL508 & CSA C22.2/14 per CUL, EN61010-1 EMC: FCC part 15, ICES-003, EN55022, IEC61326-1 Hazardous Locations: UL1604, CSA22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); EN50021/EN60079-15 (Zone 2), ATEX Group II, Cat 3 (Zone 2), EEx nA II T4 X Marine and Off-shore: DNV (Det Norske Veritas) No. 2.4 MTBF: Mean Time Between Failure: >1,000,000 hours RoHS and WEEE: RoHS (Pb free) and WEEE compliant ISO9001:2000: Certified "Total Quality" company Industrial Warranty: 3 years with product registration MECHANICAL Case: Low profile, ideal for shallow enclosures and tight spaces Material: Rust-proof Lexan and aluminum with clear protective coating Protection: IP30 protection from dust and debris Mounting: DIN rail or direct to panel (no optional kits or accessories required) Dimensions: 3.8" x 6.25" x 2.3" (9.6 cm x 15.9 cm x 5.8 cm) Weight : 12 oz. (0.34 kg) Specifications are subject to change. Consult factory for latest information. Order Guide PART NUMBER 10/100 Gigabit DESCRIPTION FIBER PORTS RJ45 RJ45 ET-9RG-1-D1 6 3 - ET-9RG-CM-D1 6 2 1 mm gigabit fiber transceivers - up to 550 m typ. ET-9RG-MX-D1 6 1 1 mm gigabit fiber transceivers - up to 550 m typ. ET-9RG-MM-D1 6 1 2 mm gigabit fiber transceivers - up to 550 m typ. ET-9RG-CS-D1 6 2 1 sm gigabit fiber transceivers - up to 10 km typ. ET-9RG-SX-D1 6 1 1 sm gigabit fiber transceivers - up to 10 km typ. ET-9RG-SS-D1 6 1 2 sm gigabit fiber transceivers - up to 10 km typ. Longer Distances - Contact SIXNET for special use and long haul transceivers MODELS ET-9RG-1 Six 10/100 RJ45 Ports Three 10/100/1000 RJ45 Ports ET-9RG-MM Six 10/100 RJ45 Ports One 10/100/1000 RJ45 Port Two Multimode Fiber Ports - 1000 Mbps ET-9RG-SS Six 10/100 RJ45 Ports One 10/100/1000 RJ45 Ports Two Singlemode Fiber Ports - 1000 Mbps