Product Data Sheet Legacy - ET-9RS Legacy - 9 Port Industrial Ethernet Ring® Switch Overview The ET-9RS is a 9 port industrial Ethernet Real-time Ring™ switch that provides super-fast, fault-tolerant network redundancy using rings to ensure your critical real-time system stays running. The Real-time rings self-configure and work right out of the box, without the need for complex configuration steps making them truly plug and play. The ET-9RS is also designed to be rugged and ultra-reliable. The ruggedness comes from its wide operating temperature range, industrial ratings (UL, CE, marine, hazloc, etc.) plus SIXNET’s 25+ years of expertise in designing truly industrial rated products. The reliability is field proven with over 1,000,000 service-free hours (MTBF) based on real-world data of thousands of switches currently in the field. SIXNET industrial Ethernet switches are the toughest and most reliable with a unique 20-year support and service promise! PRODUCT HIGHLIGHTS 9 ports with up to two fiber optic ports Super-fast, fault tolerant ring redundancy Pre-configured for true plug and play simplicity Truly rugged design with -40 to 85°C operation MIL-STD-1275 power protection Compact, low-profile packaging that fits in tight spaces and shallow enclosures Features ADVANCED HARDWARE FEATURES Nine Ethernet Ports that are fully IEEE 802.3 compliant All 10/100 RJ45 ports are auto-detecting, auto-crossover and auto-polarity Up to two 100Mbps fiber optic ports for distances up to 120km Self-test / alarm output for reporting errors Dual redundant power inputs with MIL-STD-1275 surge and spike protection DIN rail or direct panel mounting (no extra kits required) REAL-TIME PERFORMANCE Real-time Ring™ for ultra-fast fault-tolerant loops Link loss recovery of 30 mS + 5 mS per hop! Priority Queuing (QoS/CoS) for real-time operation Modbus over Ethernet monitoring - use Modbus to monitor power and ring status Free and easy to use Windows configuration utility (Optional: only needed for advanced operation; the switch and rings are plug & play and work right out of the box!) Message filtering to prevent broadcast storms Store and forward wire speed switching - no delays! TRUE INDUSTRIAL DESIGN FOR LONG-TERM RELIABILITY Ultra-reliable with 1,000,000+ service-free hours (MTBF) Free field-installable upgrades forever Unique 20-year support and service policy Industrial -40 to +85°C operating range UL, CSA (CUL), & CE certified Hazardous locations rated for Class I, Div. 2 (Zone 2) areas Specs GENERAL Operation: Store and forward wire speed switching, non-blocking Modes: Full or half duplex operation with flow control supported on all ports MAC addresses: 2048 Memory bandwidth: 3.2 Gbps Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time) Ethernet isolation: 1500 Vrms 1 minute RJ45 COPPER PORTS RJ45 ports: Up to nine RJ45 ports that are fully IEEE 802.3 compliant RJ45 speed & duplex: Configurable or 10/100 auto-detecting for speed & duplex (full or half) RJ45 MDI/MDIX: Auto-mdi/mdix-crossover automatically supports either straight or crossed cables RJ45 polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs FIBER OPTIC PORTS Fiber optic ports: Up to two 100 Mbps fiber optic ports for distances up to 120km Transceivers: SC or ST style Multimode: Links up to 4 km typical; 1310 nm; use with 62.5/125 um fiber Transmitter power (dB): -19 min, -17 typ, -14 max Receiver sensitivity (dB): -34 typ, -32 max Singlemode: Links up to 20 km typical; 1310 nm; use with 9/125 um fiber Transmitter power (dB): -15 min, -11 typ, -7 max Receiver sensitivity (dB): -34 typ, -31 max Singlemode LongHaul: Links up to 40 km typical; 1310 nm; use with 9/125 um fiber Transmitter power (dB): -5 min, -3 typ, -0 max (special order) Receiver sensitivity (dB): -36 typ, -34 max (special order) Longer Distances: Contact SIXNET for distances up to 120 km Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11 NETWORKING FEATURES Devices supported: All IEEE 802.3 compliant devices are supported Protocols & features: All IEEE 803.2, Real-time Ring™, QoS/CoS/ToS/DS, port mirroring, broadcast storm protection, Modbus monitoring Real-time Ring™ Maximum recommended switches in a ring: <50 for best performance but more is possible (Contact SIXNET for more details) Dual ring support: Yes Link loss recovery time: 30 mS plus 5 mS per hop Industrial protocols supported: Modbus/TCP, EtherNet/IP, PROFInet, Foundation Fieldbus HSE and others Standards: IEEE 802.3, 802.3u, 802.3x, 802.1p Management interfaces: Free Windows configuration utility (only needed to configure advanced capabilities such as QoS, port mirrioring, Modbus monitoring ...) POWER & ALARM OUTPUT Power input: Dual redundant power inputs for redundant power supplies Input voltage range: 10 to 50 VDC (derate operating temperature 1.8°C per volt above 30V) Power consumption typical with all ports linked and active 6.0 W (ET-9RS-1 with all copper ports) 7.0 W (ET-9RS-2/3 with 1 fiber port) 8.0 W (ET-9RS-4/5 with 2 fiber ports) Industrial surge and spike protection: 15 kW peak, 5 kW (10 times for 10 us) MIL-STD-1275 surge and spike protection (All models) Surge: 100V for 1 second ... More Info Transient: 15,000 watts peak Spike: 250 volts (50 times for 100 uS) Self-test / Alarm Output: Same voltage as power input; 0.5 Amps max. ENVIRONMENTAL Operating temperature: -40 to 85°C (cold startup at -40°C) (derate 1.8°C per volt above 30 VDC input) Storage temperature: -40 to 85°C Humidity: 5 to 95% RH (non-condensing) Vibration: IEC68-2-6 Shock: IEC68-2-27 Freefall: IEC68-2-32 STANDARDS & CERTIFICATIONS Electrical safety: UL508 & CSA C22.2/14 per CUL, EN61010-1 EMC: FCC part 15, ICES-003, EN55022, IEC61326-1 Hazardous locations: UL1604, CSA22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); EN50021/EN60079-15 (Zone 2), ATEX Group II, Cat 3 (Zone 2), EEx nA II T4 X MTBF Mean Time Between Failure: >1,000,000 hours RoHS and WEEE: RoHS (Pb free) and WEEE compliant ISO9001:2000: Certified "Total Quality" company Industrial warranty: 3 years with product registration MECHANICAL Case: Low profile, ideal for shallow enclosures and tight spaces Material: rust-proof Lexan and aluminum with clear protective coating Protection: IP30 protection from dust and debris DIN rail mounting or direct to panel (no optional kits or accessories required) Dimensions: 3.8" x 6.25" x 2.3" (9.6 cm x 15.9 cm x 5.8 cm) Weight: 12 oz. (0.34 kg) Specifications are subject to change. Consult factory for latest information. Order Guide PART NUMBER RJ45 DESCRIPTION OF FIBER PORT ET-9RS-1-E1 9 - ET-9RS-2SC-E1 8 1 multimode SC for links up to 4 km ET-9RS-2ST-E1 8 1 multimode ST for links up to 4 km ET-9RS-3SC-E1 8 1 singlemode SC for links up to 20 km ET-9RS-3ST-E1 8 1 singlemode ST for links up to 20 km ET-9RS-3SCL-E1 8 1 singlemode long haul SC for links up to 40 km ET-9RS-3STL-E1 8 1 singlemode long haul ST for links up to 40 km ET-9RS-4SC-E1 7 2 multimode SC for links up to 4 km ET-9RS-4ST-E1 7 2 multimode ST for links up to 4 km ET-9RS-5SC-E1 7 2 singlemode SC for links up to 20 km ET-9RS-5ST-E1 7 2 singlemode ST for links up to 20 km ET-9RS-5SCL-E1 7 2 singlemode long haul SC for links up to 40 km ET-9RS-5STL-E1 7 2 singlemode long haul ST for links up to 40 km Longer Distances -contact SIXNET for fiber distances up to 120 km. MODELS ET-9RS-1 9 RJ45 Ports ET-9RS-2SC or -3SC 8 RJ45 & 1 Fiber (SC Style) ET-9RS-2ST or -3ST 8 RJ45 & 1 Fiber (ST Style) ET-9RS-4SC or -5SC 7 RJ45 & 2 Fiber (SC Style) ET-9RS-4ST or -5ST 7 RJ45 & 2 Fiber (ST Style)