PRODUCT DATASHEET SL/SLX-6RS-1/4/5 6 PORT INDUSTRIAL ETHERNET RING SWITCH The SL/SLX-6RS is a 6 port industrial Ethernet switch featuring Sixnet’s Real-Time-Ring™ which provides very fast, fault-tolerant network redundancy and prioritized message delivery needed in critical real-time systems. These Rings self-configure and just run, without the complex configuration steps required by alternative solutions. This advanced technology delivers reliability and performance, saves you money, and makes your job easier. PRODUCT HIGHLIGHTS 6 ports including up to 2 fiber optic Super-fast, fault-tolerant ring redundancy Pre-configured for true plug & play simplicity Truly industrial hardened design Slim case for DIN rail or direct panel mounting REAL-TIME FAULT-TOLERANT RINGS Recovery time of 30 mS plus 5 mS per hop! Ideal for deterministic systems and PLCs Real-time Modbus over Ethernet monitoring REAL-TIME TRAFFIC PRIORITIZATION (QoS) Assure delivery of real-time data Improve network utilization User settable priority assignments SL MANAGED SWITCH FEATURES – at a lower costt User configurable port settings Port mirroring for traffic diagnostics Message filtering to prevent broadcast stormss TROUBLE FREE OPERATION Ultra-reliable 1,000,000 + hours MTBF -40 to +85 °C operating range (SLX model) UL/CSA (CUL), CE and Hazloc (Zone 2) rated (PENDING) Dual (redundant) power inputs Industrial surge and spike protection Self-test/alarm output contact SL SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES SLX SLX WWW.SIXNET.COM 6 PORT INDUSTRIAL ETHERNET RING SWITCH ETHERNET PERFORMANCE 6 fast Ethernet ports with up to 2 fiber Managed, store & forward, wire-speed All IEEE 802.3 Ethernet protocols supported RJ45 ports (shielded) 10/100BaseTX RJ45 port speed auto-negotiation RJ45 MDI/MDIX auto-crossover RJ45 TD and RD auto-polarity Fiber optional on port 5 and 6 Fiber optic port speed: 100 Mbps Fiber typical specs (see separate datasheet for details) Multimode, 4 km, 1310 nm, 50-62.5/125 μm Singlemode, 20 km, 1310 nm, 9-10/125 μm Long haul, up to 120 km, 1550 nm, 9-10/125 μm Typical latency (varies on load & settings) @ 10 Mbps: 16 us + frame time @ 100 Mbps: 5 us + frame time Full or half duplex operation configurable per port MAC addresses supported 2048 Memory bandwidth 3.2 Gbps Ethernet isolation 1500 VRMS 1 minute ETHERNET COMPLIANCE IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS) IEEE 802.3x (Full-Duplex with Flow Control) REAL-TIME-RING™ Link loss recovery: 30 mS plus 5 mS per hop Switches in a ring: <50 for best performance Multiple rings supported (configurable) “OK” ALARM OUTPUT Indicates power & operational status Voltage same as switch input voltage Maximum current output 0.5 Amp POWER INPUT Redundant input terminals Reverse polarity protection Input power (typ. with all ports active) 4 W (-1 model w/ no fiber) 6 W (-4/5 model w/ 2 fiber) Power input voltage 10-30 VDC Transient protection 15,000 watts peak Spike protection 5,000 watts (10x for 10 uS) SL/SLX-6RS-1/4/5 ENVIRONMENTAL Operating temperature: SLX: -40 to +85 °C (cold startup at -40 °C) SL: -40 to +60 °C Storage temperature -40 to +85 °C Humidity (non-condensing) 5 to 95% RH (optional conformal coating is available) Vibration and shock – IEC60068-2-6, -27 STANDARDS COMPLIANCE Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE EMC – FCC part 15, ICES-003; EN61000-6-2/4, CE Hazardous locations – UL1604 / CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2, Category 3), CE (ATEX) Maritime – designed for marine and offshore per ABS RoHS and WEEE compliant ISO9001:2000 certified company PHYSICAL DIN rail or direct panel mounting Case – Aluminum (SLX) or Lexan (SL) Ingress protection – IP30 Weight – SLX: 0.23 kg (8 oz.); SL: 0.17 kg (6 oz.) Dimensions – see mechanical diagram ORDER ORDERING GUIDE SLX-6RS-1-D1 6 RJ45 ports, metal case, wide temp. SLX-6RS-4SC-D1 4 RJ45 ports, 2 multimode SC, 4 km SLX-6RS-4ST-D1 4 RJ45 ports, 2 multimode ST, 4 km SLX-6RS-5SC-D1 4 RJ45 ports, 2 singlemode SC, 20 km SLX-6RS-5ST-D1 4 RJ45 ports, 2 singlemode ST, 20 km SLX-6RS-5SCL-D1 4 RJ45 ports, 2 singlemode SC, 40+ km SLX-6RS-5STL-D1 4 RJ45 ports, 2 singlemode ST, 40+ km SL- w/ Lexan case and limited temperature Setup Wizard Free - Windows configuration tool ET-PS-024-02 Power supply – AC to 24VDC, 2A SP-ETH-2 Dual port Ethernet surge & lightning protector for 10/100 ports NOTE: The suffix 1 means it is pre-configured for 1 ring on ports 5 & 6. Contact SIXNET for other pre-configuration options. 3.79" [9.63 cm] 4.50" [11.43 cm] SLX with Metal Case 3.72" [9.45 cm] SLX SL SL with Lexan Case 4.00" [10.16 cm] 3.00" [7.62 cm] 1.50" [3.81 cm) 3.26" [8.28 cm] SIXNET Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES All specifications are subject to change. Consult factory for latest info. Datasheet SL/SLX-6RS-1/4/5 Rev July 2, 2009 WWW.SIXNET.COM