Product Data Sheet SlimLine Plus PoE Industrial Connectivity Industrial Power over Ethernet (PoE) Injectors The EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors add 48 VDC power into 1 or 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. The 24V-1 model steps up your 24 VDC for sourcing 1 PoE port so no separate DC/DC converter is required. The 48V-2 model is two injectors in one to save space and money. Both are ultra-rugged, reliable and easy to use. Product Highlights Overview Industrial Connectivity Product Highlights Fully IEEE 802.3af compliant Power Sourcing Equipment (PSE) operation Model 1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port Model 2 saves you space and money by powering 2 PoE (48 VDC) ports Plug and play saves you time and money Industrial rated for any application To learn more about our Industrial Connectivity Accessories, simply contact [email protected] or call +1 518 877 5173. Features IEEE 802.3af Compliant PoE Ports Power Sourcing Equipment (PSE) operation Auto-detection of PD (powered devices) Supplies up to 15.4 watts per channel Over-temperature and over-current detection Over and under-voltage protection Plug & Play Simplicity No user settings Ready to use right out of the box Industrial Tough Truly industrial -40 to 75°C operation (derated) Slim package for DIN-rail or panel mounting To learn more about our Industrial Connectivity Accessories, simply contact [email protected] or call +1 518 877 5173. Specs Ethernet Performance Ethernet protocols supported all IEEE 802.3 Ethernet connectors per channel 2 (1 for Ethernet in, 1 for PoE out) Ethernet port standards 10/100BaseTX IEEE 802.3/802.3u PoE Output Fully IEEE 802.3af compliant IEEE 802.3af PoE operation Power Sourcing Equipment (PSE) PoE power output 48 VDC @ 15.4 Watts per channel 24V model: Derate 1W per 2°C over 60°C RJ45 PoE pin assignments (A=unused pair; B=signal pair) A: TX(3,6); RX(1,2); V-(7,8); V+(4,5) B: TX/V- (3, 6); RX/V+ (1, 2) PoE operation auto-detection and power management PoE disconnect mode AC for 24V-1 and DC for 48V-2 PoE protection over-temp, over-current, over/under-voltage and transient Power input fully IEEE 802.3af PoE compliant Power input for 48V-2 models 45-56 VDC @ 31 Watts max. Power input for 24V-1 models 18-30 VDC @ 20 Watts max. PoE transient protection 15,000 watts peak PoE spike protection 5,000 watts (10 times for 10 uS) Environmental Operating temperature range -40 to 75°C (cold startup @ -40) 24V model: Derate 1W per 2°C over 60°C Storage temperature range -40 to 85°C Humidity (non-condensing) 5 to 95% RH Vibration, shock and freefall IEC68-2-6, -27 and -32 Electrical safety UL508/CSA C22.2/14 (CUL); EN61010-1 EMC emissions and immunity FCC Part 15 / ICES-003; EN55022/IEC61326-1 Hazardous locations UL1604/CSA C22.2/213 (CUL), C1, D2; ATEX/Cenelec Zone 2 Mechanical DIN-rail or direct to panel mounting Packaging material and protection Lexan with IP30 protection Dimensions (H x W x D) 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm) Weight approximate 0.17 Kg (0.25 lbs) MTBF estimated >1,000,000 hours Specifications are subject to change. Contact Sixnet to learn more. To learn more about our Industrial Connectivity Accessories, simply contact [email protected] or call +1 518 877 5173. Order Guide Part Number Description EB-PSE-24V-1A PoE injector for 1 PoE port (uses unused pairs), 24V input EB-PSE-48V-2A PoE injector for 2 PoE port (uses unused pairs), 48V input EB-PSE-24V-1B uses signal pairs for PoE, ideal for 4 wire cables (special order) EB-PSE-48V-2B uses signal pairs for PoE, ideal for 4 wire cables (special order) To learn more about our Industrial Connectivity Accessories, simply contact [email protected] or call +1 518 877 5173. Models EB-PSE-24V-1A EB-PSE-48V-2A EB-PSE-24V-1A 1 PoE Port EB-PSE-48V-2A 2 PoE Ports To learn more about our Industrial Connectivity Accessories, simply contact [email protected] or call +1 518 877 5173.