4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS DATE 5/16/13 DESCRIPTION REV C ECN #4629 ENGR L LOCKRIDGE D D 66.55 2.62 384.87 15.15 C C 15 LB. GAS SPRING 5 17.85 B B 177.80 7.00 15° 165.10 6.50 79.34 3.12 4 5 A THE ENCLOSURE HOUSING AND COVER INCLUDE THE NECESSARY MOUNTING HOLES TO INSTALL THE GAS SPRING ON EITHER SIDE OF THE ENCLOSURE. REMOVE THE SPRING AND MOUNTING HARDWARE AND RE-INSTALL ON THE OPPOSITE SIDE IF DESIRED. CUSTOMER DRAWING AS AN ALTERNATIVE TO THE SPRING PLUNGER LATCH, THE INCLUDED M3 X 10 SOCKET HEAD CAP SCREW CAN BE USED TO LOCK THE ENCLOSURE COVER IN THE CLOSED POSITION. 3. MATERIAL SPECIFICATIONS: ENCLOSRE - POWDER COATED & ANODIZED ALUMINUM ALLOY HARDWARE - STAINILESS STEEL HANDLES - BLACK THERMOPLASTIC 2. ITA MOUNTING HARDWARE INCLUDED. QTY 8, M4 X 45 SHC SCREWS A 4 VIRGINIA PANEL CORPORATION WWW.VPC.COM RELATIVE CONNECTOR POSITIONS AND WIRE ROUTING ARE GENERIC AND MAY VARY WITH PINOUT DIMENSIONS ARE SHOWN AS: SIZE 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 SLOPED ENCLOSURE, G12X ITA [MILLIMETERS] INCHES 2 C CAGE CODE DWG.NO. 18117 SCALE: 1:3 REV 410114003 410114003 1 C 5/29/12 SHEET 1 OF 2 4 3 2 1 D D 10.66 .42 365 14.37 C C SHADED REGION REPRESENTS RECOMMENDED MACHINABLE AREA ON COVER. FEATURES OUTSIDE OF THIS REGION MAY INTERFERE WITH EXISTING COMPONENTS OR FEATURES. 273.45 10.77 201.10 7.92 B B 32.40 1.28 33.53 1.32 386.33 15.21 A A CUSTOMER DRAWING - CUSTOMER DRAWING - CUSTOMER DRAWING DO NOT SCALE DRAWING 4 3 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTED FOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. 2 SIZE C CAGE CODE DWG.NO. SCALE: REV 410114003 18117 1:2 410114003 1 C 6/14/12 SHEET 2 OF 2