4 3 2 1 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING REVISIONS DATE 5/30/13 DESCRIPTION REV B ECN #4652 ENGR L LOCKRIDGE D D 20.32 .80 2.03 .08 16.26 .64 12.70 .50 4.06 .16 7.33 .29 2-56 MOUNTING HARDWARE SUPPLIED. PIN A1 PIN F1 22.86 .90 C 50.04 1.97 C TIER A PIN A10 PIN F10 MICROCOAX/POWER POSITIONS 1 THRU 6 108.20 4.26 18.35 .72 8.32 .33 100.08 3.94 MICROCOAX/POWER POSITIONS 7 THRU 12 #2-56 UNC-2B x .20 DP. PIN F1 PIN A1 33.02 1.30 TIER B B PIN A10 B PIN F10 CAVITY FOR KEYING KIT, TYP. 2 PLCS. ACCESSORY P/N 310113461 (2 KEYS PER KIT) NOT INCLUDED WITH RECEIVER 20.55 .81 4.72 .19 CUSTOMER DRAWING A A VIRGINIA PANEL CORPORATION 2. MATERIALS: HOUSING: BLACK THERMOPLASTIC BUSHING: STAINLESS STEEL LATCH POST: STAINLESS STEEL MOUNTING HARDWARE: STAINLESS STEEL WWW.VPC.COM i2 HYBRID RCV ASM, 120/12 CRIMP DIMENSIONS ARE SHOWN AS: 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 [MILLIMETERS] INCHES 2 SIZE C CAGE CODE DWG.NO. 18117 SCALE: 3:2 REV 310130105 310130105 1 B 7/26/11 SHEET 1 OF 2 4 3 2 25.40 1.000 MIN. D 1 FOR MOUNTING PLATES .09" THICK OR LESS .100 THRU, TYP. 4 PLCS FOR MOUNTING PLATES THICKER THAN .09" .086-56UNC-2B THRU, TYP. 4 PLCS. 16.26 .640 TYP. 1.27 .050 TYP. D 5.7 .23 C C 100.07 3.940 88.6 3.49 B B 4.8 .19 TYP. 9.1 .36 TYP. 2.3 R.09 TYP. 18.8 .74 TOLERANCES ARE: .XX = [.25].01 .XXX = [.13] .005 UNLESS OTHERWISE SPECIFIED A A PANEL MOUNTING DETAIL DO NOT SCALE DRAWING 4 3 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTED FOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. 2 SIZE CAGE CODE DWG.NO. 18117 C SCALE: 3:2 310130105 1 REV 310130105 B 7/26/11 SHEET 2 OF 2