8 7 6 5 4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING D 1 REV D ECN #6084 REVISIONS DESCRIPTION DATE 6/23/15 ENGR JTD D 706.05 27.80 482.60 19.00 97.89 3.85 524.65 20.66 VIEW SHOWS ENGAGEMENT LEVERS IN OPEN POSITION 85.17 3.35 VIEW SHOWS ENGAGEMENT LEVERS IN CLOSED POSITION 111.73 4.40 38.56 1.52 70.87 2.79 C C 415.37 16.35 292.10 11.50 B B 449.58 17.70 16.51 .65 RUBBER FEET ARE REMOVABLE .250-20UNC HOLES CAN BE USED TO MOUNT TO A HORIZONTAL SURFACE. MODULE POSITION A1 MODULE POSITION B1 MODULE POSITION C1 MODULE POSITION A2 MODULE POSITION B2 MODULE POSITION C2 A A CUSTOMER DRAWING VIRGINIA PANEL CORPORATION WWW.VPC.COM 2. 3/23" BALL END ALLEN WRENCH INCLUDED FOR MODULE MOUNTING. RELATIVE CONNECTOR POSITIONS AND WIRE ROUTING ARE GENERIC AND MAY VARY WITH PINOUT 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM DIMENSIONS ARE SHOWN AS: NOTES: 8 7 [MILLIMETERS] INCHES 6 5 4 3 2 SIZE D RCV, S6 TABLE TOP WITH 15" PLATFORM CAGE CODE 18117 DWG.NO. SCALE: 1:2 310122110 310122110 REV D 3/10/11 SHEET 1 OF 1 1