U N I T S P O W E R U N I T S D I S T R I B U T I O N P O W E R U N I T S Reliable rackmount power distribution for high-density, high-availability IT environments Load Meters, Network Interface and Remote Outlet Control Available Models Available with Single-Phase Input or 3-Phase Input Up to 45 Outlets 1U, 2U or 0U (Vertical) Rackmount Installation RELIABLE POWER DISTRIBUTION NETWORK INTERFACE Tripp Lite network-grade PDUs distribute power from a UPS system, generator Monitored and Switched PDUs include or wall outlet to multiple devices, including critical servers, storage and network/ a network interface (RJ45 Ethernet) that telecom equipment. There are four distinct PDU types: Basic, Metered, Monitored enables remote monitoring and remote and Switched. Refer to the chart below to understand the features and benefits condition reporting via SNMP, Web, SSH associated with each type. or telnet. This interface allows you to Tripp Lite PDU TYPES Reliable Power Distribution Local Current Metering Remote Current Monitoring Remote Outlet Power Control prevent downtime by enabling automatic load threshold notification, to monitor ambient temperature and humidity via the optional ENVIROSENSE accessory and SWITCHED PDUs to centralize your power management Models Available: 10/16/32A 16A Single-Phase 3-Phase with Tripp Lite’s free PowerAlert Network Management System. MONITORED PDUs Models Available: 16/32A 16A Single-Phase 3-Phase METERED PDUs Models Available: 16/32A 16A Single-Phase 3-Phase BASIC PDUs Monitored and/or Switched PDUs Models Available: 16A Single-Phase TCP/IP D I S T R I B U T I O N LOAD METER Metered, Monitored and Switched PDUs display the connected P O W E R U N I T S D I S T R I B U T I O N 230V Network-Grade PDUs (Power Distribution Units) P O W E R D I S T R I B U T I O N POWER DISTRIBUTION UNITS enables cycling of unresponsive devices from equipment load (current draw) in amps. Monitored and Switched 3-Phase PDUs include an advanced multimode load meter that can display the PDU’s IP address, the load for each bank/phase and the load for each outlet. Load Meter REMOTE OUTLET CONTROL Switched PDUs allow remote control of individual outlets for remote rebooting, load shedding and more. Individual outlet control any distance, reducing the need for expensive and time-consuming trips to remote sites. PowerAlert’s Remote Outlet Control Interface Remote Workstation with PowerAlert Network Management System (See last page for additional information about PowerAlert.) FEATURE FOCUS E A I PDUMH15HVNET Similar Models: PDUMH20HVNET (16A Version), PDUMNH20HV (16A Version without Remote Individual Outlet Control) B D E C Also includes: H I A A D F A A A PDUMNH32HV C Also includes: E C F E C J Similar Models: PDUMH32HV (Without Network Interface), PDUMH32HVNET (With Remote Individual Outlet Control) H A I E C C D D B PDU12IEC (front and back) Similar Models: PDUH20DV (16A Version with Detachable Cord), PDUNV (With Fixed Input Cord Terminating with C20 Inlet and Adapters Terminating with A C14, 5-15P, 5-20P, L5-20P and L6-20P) A E A I C A E A A B PDUMH20HV E I D C K E D A I I B B I PDUMH20HVATNET (front and back) Similar Model: PDUMH20HVAT (Without Network Interface) B B Also includes: H I PLUG AND OUTLET IDENTIFICATION J PLUG J PDUMV20HV PDU3XVN10G16 PDU3XVSR10G16 Similar Models: PDUMV32HVNET (32A Version), PDUMNV20HV (Without Remote Individual Outlet Control) Also includes: Similar Model: PDU3XVN3G16 (With 1 m Cord) Similar Model: PDU3XVSR3G16 (With 1 m Cord) Also includes: Also includes: Also includes: E G H E G H E G H E G H C14 C20 IEC-309 Blue 32A (2P+E) 32A Blue IEC 60309 2P+E 6H-P 32A Blue IEC 60309 2P+E 6H-P OUTLET PDUMV20HVNET IEC-309 Red 16A (3P+N+E) 32A Blue IEC 60309 2P+E 6H-R C13 C19 IEC-309 Blue 32A (2P+E) 32A Blue IEC 60309 2P+E 6H-R IEC-309 Red 16A (3P+N+E) A AC Outlets G Toolless Mounting Buttons B AC Inlet (C14 or C20) Connects to a user-supplied input power cord with a region-specific plug. Switched Outlet C Load Meter Displays the connected equipment load (current draw) in amps. Monitored and Switched 3-Phase PDUs include an advanced multimode load meter that displays the PDU’s IP address, the load for each bank/phase and the load for each individual outlet. Load Meter E Removable Mounting Brackets Toolless Mounting Button H Removable Cord Retention Brackets Secure power cords, reducing the risk of disconnection. I Metal Housing Cord Retention Bracket Maximizes durability and safety. D Network Interface Enables PDU management over Ethernet LAN or WAN via SNMP, a Web browser, SSH or telnet. Also supports remote monitoring of temperature, humidity and dry contacts via ENVIROSENSE accessory, sold separately. Support toolless 0U (vertical) installation in compatible racks. Detachable 90° rotation brackets allow PDU outlets to face the rear of the rack for improved access and airflow. J Splash-Proof Plug Network Interface Splash-proof plug with IP44 protection rating connects to a compatible outlet. Splash-Proof Plugs K Automatic Transfer Switch (ATS) ENVIROSENSE Support rackmount installation and surface mounting. F Circuit Breakers The PDU includes primary and secondary AC inputs, which allows the PDU to automatically switch to the secondary input if the primary input deviates from the designated safe voltage/frequency range. ATS PDUs can provide power redundancy to single-cord devices or make any online UPS system hot-swappable. Note: If the primary input is plugged into a UPS, it must be an on-line UPS. SPECIFICATIONS NOMINAL VOLTAGE MAXIMUM METERS/ INPUT OUTPUT CURRENT BANKS AC INPUT OUTLETS MODEL (50/60 HZ) CONNECTOR (QUANTITY & TYPE) RACK SPACE 3-PHASE SWITCHED PDUs (3-Phase Input, Single-Phase Output, Network-Grade Power Distribution, Load Meters, Network Interface and Remote Individual Outlet Control) 0U (178 cm long)(2, 3) 24 (21 C13+ 3 C19) Input: 3-Phase 400V 16A 1/3 IEC-309 Red 16A (3P+N+E)(1) PDU3XVSR10G16 (3 m cord) Output: Single-Phase 230V 24 (21 C13+ 3 C19) 0U (178 cm long)(2, 3) Input: 3-Phase 400V 16A 1/3 IEC-309 Red 16A (3P+N+E)(1) PDU3XVSR3G16 (1 m cord) Output: Single-Phase 230V 3-PHASE MONITORED PDUs (3-Phase Input, Single-Phase Output, Network-Grade Power Distribution, Load Meters and Network Interface) 0U (178 cm long)(2, 3) 36 (30 C13 + 6 C19) Input: 3-Phase 400V 16A 1/3 IEC-309 Red 16A (3P+N+E)(1) PDU3XVN10G16 (3 m cord) Output: Single-Phase 230V 36 (30 C13 + 6 C19) 0U (178 cm long)(2, 3) Input: 3-Phase 400V 16A 1/3 IEC-309 Red 16A (3P+N+E)(1) PDU3XVN3G16 (1 m cord) Output: Single-Phase 230V 3-PHASE METERED PDU (3-Phase Input, Single-Phase Output, Network-Grade Power Distribution and Load Meters) 45 (36 C13 + 9 C19) 0U (178 cm long)(2,3) Input: 3-Phase 400V 16A 3/3 IEC-309 Red 16A (3P+N+E)(1) PDU3XMV6G20 (2 m cord) Output: Single-Phase 230V SINGLE-PHASE SWITCHED PDUs (Network-Grade Power Distribution, Load Meters, Network Interface and Remote Outlet Control) 8 (C13) 1U 220/230/240V 10A 1/1 C14 inlet(4,5) PDUMH15HVNET 220/230/240V 16A 1/1 C20 inlet(4,6) 8 (C13) 1U PDUMH20HVNET 220/230/240V 16A 1/1 2 x C20 inlet(4,7) 10 (8 C13 + 2 C19) 1U PDUMH20HVATNET 220/230/240V 32A 1/2 IEC-309 Blue 32A (2P+E)(1) 16 (C13) 2U PDUMH32HVNET 220/230/240V 16A 1/1 C20 inlet(4) 24 (20 C13 + 4 C19) 0U (178 cm long)(2,3) PDUMV20HVNET 16A 1/1 C20 inlet(4) 8 (7 C13 + 1 C19) 0U (99 cm long)(2,3) 220/230/240V PDUMV20HVNET2 24 (20 C13 + 4 C19) 0U (178 cm long)(2,3) 220/230/240V 32A 1/2 IEC-309 Blue 32A (2P+E)(1) PDUMV32HVNET SINGLE-PHASE MONITORED PDUs (Network-Grade Power Distribution, Load Meters and Network Interface) 8 (C13) 1U 220/230/240V 16A 1/1 C20 inlet(4) PDUMNH20HV 220/230/240V 32A 2/2 IEC-309 Blue 32A (2P+E)(1) 16 (12 C13 + 4 C19) 2U PDUMNH32HV 220/230/240V 16A 1/1 C20 inlet(4,2) 24 (20 C13 + 4 C19) 0U (178 cm long)(2,3) PDUMNV20HV 16A 1/1 C20 inlet(4) 20 (18 C13 + 2 C19) 0U (90 cm long)(2,3) 220/230/240V PDUMNV20HV2 SINGLE-PHASE METERED PDUs (Network-Grade Power Distribution and Load Meters) 10 (8 C13 + 2 C19) 1U 220/230/240V 16A 1/1 C20 inlet(4,6) PDUMH20HV 220/230/240V 16A 1/1 2 x C20 inlet(4,7) 10 (8 C13 + 2 C19) 1U PDUMH20HVAT 220/230/240V 32A 2/2 IEC-309 Blue 32A (2P+E)(1) 18 (16 C13 + 2 C19) 2U PDUMH32HV 220/230/240V 16A 1/1 C20 inlet(4) 38 (32 C13 + 6 C19) 0U (162 cm long)(2,3) PDUMV20HV SINGLE-PHASE BASIC PDUs (Network-Grade Power Distribution) 14 (12 C13 + 2 C19) 1U or 0U (44 cm long)(2) 220/230/240V 16A 0/1 C20 inlet(4) PDU12IEC 14 (12 C13 + 2 C19) 1U or 0U (44 cm long)(2) 220/230/240V 16A 0/1 C20 inlet(4,8) PDUNV 14 (12 C13 + 2 C19) 1U or 0U (44 cm long)(2) 220/230/240V 16A 0/1 C20 inlet(4,9) PDUH20DV HOT-SWAP PDUs (Dual Inputs and Manual Transfer Switch Add Hot-Swap Capability to Compatible UPS Systems up to 3 kVA) 8 (C13)(12) 2U(14) 220/230/240V 10A 0/1 2 x C14 inlet(4,10) PDUBHV10 8 (6 C13 + 2 C19)(13) 2U(14) 220/230/240V 16A 0/1 2 x C20 inlet(4,11) PDUBHV20 Certifications vary by model. (1) Splash-proof plug (IP44 protection rating). (2) 0U represents vertical rack installation. (3) Includes toolless mounting buttons. (4) Connect each inlet to a user-supplied input power cord with a region-specific plug if required. (5) Includes detachable 198 cm input cord with C14 plug. (6) Includes detachable 259 cm input cord with C20 plug. (7) Includes primary and secondary AC inputs. Also includes two 366 cm input cords with C20 plugs. (8) Includes 305 cm input cord with C20 plug. (9) Includes 366 cm cord with C20 plug. (10) Includes two 183 cm input cords (one fixed cord for UPS input and one detachable cord for utility input) with C14 plugs. (11) Includes one fixed 183 cm input cord (for UPS input) and one detachable 152 cm input cord (for utility input) with C20 plugs. (12) Also has C13 outlet for UPS connection. (13) Also has C19 outlet for UPS connection. (14) Shallow depth allows the PDU to fit behind select UPS systems without using additional rack space. CENTRALIZED POWER MANAGEMENT WITH POWERALERT NMS PowerAlert NMS (Network Management System) software is included with Monitored and Switched PDUs, allowing IT managers to access all PDU functions from any location. PowerAlert NMS can auto-discover and manage hundreds of Monitored or Switched PDUs and associated environmental sensors (model ENVIROSENSE, sold separately) over the network from a single interface. • Monitor PDUs remotely, including load levels, other power conditions, environmental conditions and more. Receive alerts via e-mail, text-messaging or SNMP if values exceed user-defined alarm thresholds. • Mass-configure PDUs with pre-defined settings or firmware updates. • Log power events and data according to user-defined parameters. • Reboot unresponsive devices from any distance, reducing the need for expensive and time-consuming trips to remote sites. (Switched PDUs) • Shed nonessential loads automatically during power failures to increase the runtime of critical systems. (Switched PDUs) • Prevent unauthorized loads by locking out unused outlets. (Switched PDUs) • Schedule equipment idling to reduce power costs by turning off selected devices during off-hours. (Switched PDUs) PowerAlert Network Management System POWER CORDS & ACCESSORIES Model Plug Outlet Length Rating Description P004-002-5 C14 C13 0,6 m 10A / 100-250V Cord (5-Pack) P004-002-13LA C14 C13 (90° Left) 0,6 m 10A / 100-250V Cord P004-002-13RA C14 C13 (90° Right) 0,6 m 10A / 100-250V Cord P005-002 C14 C13 0,6 m 15A / 100-250V Cord P005-006 C14 C13 1,8 m 15A / 100-250V Cord P005-010 C14 C13 3m 15A / 100-250V Cord P047-002 C14 C19 0,6 m 15A / 100-250V Cord P047-004 C14 C19 1,2 m 15A / 100-250V Cord P047-006 C14 C19 1,8 m 15A / 100-250V Cord P047-010 C14 C19 3m 15A / 100-250V Cord P036-002 C20 C19 0,6 m 20A / 100-250V Cord P036-002-19LA C20 C19 (90° Left) 0,6 m 20A / 100-250V Cord P036-002-19RA C20 C19 (90° Right) 0,6 m 20A / 100-250V Cord P036-006 C20 C19 1,8 m 20A / 100-250V Cord P032-007 C20 C13 2,1 m 20A / 100-250V Cord P056-006 BS1363 C13 1,8 m 5A / 200-250V Cord P052-008 BS1363 C19 2,4 m 13A / 200-250V Cord P054-006 CEE 7/7 C13 1,8 m 10A / 200-250V Cord P050-008 CEE 7/7 C19 2,4 m 16A / 200-250V Cord P070-010 IEC-309 Blue (2P + E) C19 3m 16A / 200-250V Cord C14 Wonpro* 2,5 cm 10A / 100-250V Adapter UNIPLUGINT * The Wonpro universal outlet is compatible with most household plugs worldwide. Model ENVIROSENSE Description Remote environmental sensor for Monitored and Switched PDUs. Monitors ambient temperature and humidity. Also monitors and controls alarm, security and telecom devices through contact closure communications. Can monitor up to three additional environmental sensors. Connects to optional SRSWITCH magnetic switch kit for rack enclosure door entry detection. 3,6 m connection cord. SRSWITCH Magnetic switch kit. Includes two entry detection switches for rack enclosure doors. Requires ENVIROSENSE. P350-10N-10 10-pack of reusable black hook-and-loop cable ties. 25 cm x 1,6 cm. ABOUT TRIPP LITE Since 1922, Tripp Lite has established a global reputation for quality manufacturing, superior value and excellent service. Tripp Lite makes more than 2 500 products to power, protect and connect electronic equipment, including UPS systems, replacement batteries, PDUs, rack systems, cooling solutions, surge suppressors, IP console servers, KVM switches, cables, laptop accessories, power strips and inverters. Learn more at www.tripplite.com. Tripp Lite World Headquarters: 1111 W. 35th Street, Chicago, IL 60609 USA • +1.773.869.1212 Tripp Lite Middle East: +971.4.887.1633 • [email protected] Tripp Lite Asia Pacific: +972.54.2057646 • [email protected] Tripp Lite Eastern Europe: +36.1.203.7941 • [email protected] Tripp Lite East/West Africa: +254.731.137.202 • [email protected] Tripp Lite South Africa: +27.82.8099.043 • [email protected] Copyright © 2013 Tripp Lite. All trademarks are the property of their owners. Photos and illustrations may differ slightly from actual products. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite Western Europe: +33.1.70.61.77.85 • [email protected] Tripp Lite United Kingdom: +44.01635.887396 • [email protected] 13-05-010 95-33D6