RDH Series-Radial Dipped Ultra High Voltage Capacitor Holy Stone Radial Dipped Ceramic Capacitors [Ultra High Voltage Radial Capacitor – 2KV-5KV] RDH Series Features Applications Advanced process technology produces thinner layers of ceramic dielectric and offers higher voltage rating and capacitance values Provides good frequency response High reliability RoHS compliant Halogen free available Summary of Specification ℃ Operation Temperature -55~+125 Rated Voltage 2KV to 5KV Temperature Coefficient NPO : ≤ ± 30ppm/ X7R : ≤ ± 15% Capacitance Range Suitable for Power supplies , Surge protection Industrial control circuits , Voltage multipliers , Data isolation ℃ ℃ (EIA Class Ι ) , -55~+125 ℃ (EIA Class Ⅱ ) , -55~+125 NPO :2pF to 56nF X7R :100pF to 390nF Dissipation Factor : NPO : Q≥ 1000 X7R : D.F.≤2.5% Ω or 500/C Ω whichever is smaller Insulation Resistance 10G Aging NPO:0% ; X7R: 2.5 % Dielectric Strength 1000 ≤ V :120% Rated Voltage How To Order RDH RDH Product Code RDH: Radial Dipped Ultra High Voltage Capacitor XX Dielectric Ex.: N: NPO X: X7R 102 102 Capacitance Unit : pF Ex.: 100:10×100 471:47×101 102:10×102 KK 202 202 HK HK TT NN Tolerance Rated Voltage Leader Style Packaging Optional Suffix Ex.: C:+/-0.25pF D:+/-0.50pF J :+/- 5% K :+/-10% M:+/-20% Ex.: 102:1000Vdc 202:2000Vdc 302:3000Vdc 402:4000Vdc 502:5000Vdc EX: Size GD:5.5x4.0 HD:5.5x4.5 I D:5.5x4.0 T: Taping &Reel B: Bulk Ex.: N :Halogen Free Indicator - 103 - RDH Series-Radial Dipped Ultra High Voltage Capacitor Holy Stone Structure & Dimension Epoxy MLCC Solder Lead Wire Unit : mm [inches] TYPE ED L (max) 5.5 W (max) 7.0 T (max) 4.0 FD 7.5 8.0 4.0 GD HD ID D.Type L W T KD 223 2KV LD Φd ℓ JD MD F (Max.) 5.0 1 ℓ 25.0+3/-1 [0.294] [0.314] [0.157] ± [0.196] 5.0±1 [0.196] 7.6 9.4 6.9 6.54 25.0+3/-1 [0.216] [0.275] [0.157] [0.984] 25.0+3/-1 [0.984] [0.299] [0.370] [0.272] [0.257] [0.984] 9.40 7.62 6.86 7.55 25.0+3/-1 [0.370] [0.300] [0.270] [0.296] [0.984] 12.0 10.2 8.13 10.2 25.0+3/-1 [0.470] [0.400] [0.320] [0.400] [0.984] 14.5 12.7 8.13 12.8 25.0+3/-1 [0.570] [0.500] [0.320] [0.503] [0.984] 17.0 15.2 8.13 15.36 25.0+3/-1 [0.670] [0.600] [0.320] [0.603] [0.984] 19.6 18.3 8.13 17.86 25.0+3/-1 [0.770] [0.720] [0.320] [0.701] [0.984] 22.1 19.1 8.13 20.46 25.0+3/-1 [0.870] [0.750] [0.320] [0.804] [0.984] F Capacitance Range NPO(N) Series Type ED FD GD HD ID WVDC 2KV 3KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV Cap Min. 100 2R0 2R0 2R0 2R0 2R0 100 100 100 2R0 100 100 100 100 100 100 100 100 Cap Max. 391 390 102 102 151 101 681 331 221 151 152 681 331 221 332 152 102 471 Type JD KD LD MD WVDC 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV Cap Min. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Cap Max. 682 332 222 102 103 472 393 182 153 682 472 332 563 333 223 682 X7R(R) Series Type ED FD GD HD ID WVDC 2KV 2KV 3KV 4KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV Cap Min. 101 101 101 101 151 151 151 151 221 221 221 221 221 221 221 221 Cap Max. 152 472 272 102 103 332 272 102 153 682 222 102 473 333 103 682 Type JD KD LD MD WVDC 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV 2KV 3KV 4KV 5KV Cap Min. 331 331 331 331 331 331 331 331 331 331 331 331 331 331 331 331 Cap Max. 104 683 223 103 154 683 223 103 224 154 473 333 394 184 563 393 Other dimensions, capacitance values and voltages rating are available. Please contact HEC. - 104 - Φ ± [0.196] 0.6±0.1 [0.196] 0.6±0.1 [0.196] 0.6±0.1 [0.196] 0.6±0.1 [0.196] 0.6±0.1 [0.196] 0.6±0.1 [0.196] 0.6±0.1 [0.196] 0.6±0.1 [0.196] d 0.6 0.1 RDH Series-Radial Dipped Ultra High Voltage Capacitor Holy Stone RDH Series Specification & Test Condition Item Operation Temperature Specification -55 to +125 Test Condition ℃ Visual Inspection Visual No abnormal exterior appearance Capacitance Within The Specified Tolerance Class Quality Factor Class (NPO): More Than 30pF : Q ≥1000 30pF & Below: Q ≥ 400+20C (C:Cap., pF) NPO C≤100pF C>100pF Dissipation Factor Class (X7R): Maximum 0.025 Insulation Resistance 10,000MΩ or 500/C Ω whichever is smaller. (C in Farad) Withstanding Voltage No dielectric breakdown or mechanical breakdown Temperature Capacitance Coefficient Ⅰ Ⅱ Char. NPO(N) X7R (X) Temp. Range -55 ~ +125 -55 ~ +125 Cap. Change ℃ ± 30ppm/℃ ℃ ± 15% ℃ ℃ Frequency ± ± 1KHz±10% Voltage ± X7R 1.0±0.2Vrms Perform a heat treatment at 150±5℃ for 30min. then place room temp. for 24 ±2hr. 1MHz 10% 1KHz 10% 1.0 0.2Vrms V> 500V, Applied 500Vdc Charge Time : 60sec. Is applied less than 50mA current. ≦ ClassΙ: [C2-C1/C1(T2-T1)] × 100% ClassⅡ: (C2-C1)/C1 × 100% T1:Standard Temperature(25℃) 1000 V :120% Rated Voltage for 1~5 sec. Current is limited to less than 50mA. T2:Test Temperature C1:Capacitance At Standard Temperature C2:Capacitance At Test Temperature Lead Strength Tensile No mechanical damage such as lead Strength breakage and loosing. Holding the body of the part, apply the pulling force to the lead as indicated below. Pulling strength: 5N Holding time: 10 1s ± Bending No mechanical damage such as lead Strength . breakage and loosing. Hold the capacitors to keep the axis vertical, bend it 90 degrees as shown below and bend back to the original position. This operation shall be done for 2~3s. and repeated for the following times. Bending force: 5N(weight :0.51kg) Test time : 2 times Solderability Leads shall be covered by new solder more than 75% of its surface Completely immerse both terminations in solder at 235 5 for 2 0.5s Solder : H63A Flux :Rosin Dipping :By 1.5~2.0mm from the root of lead Resistance to Soldering Heat Appearance No mechanical damage shall Completely immerse both terminations in occur solder at 250 5 for 5 1s Capacitance Class (NPO): Within 2.5% or 0.25pF whichever Solder : H63A Flux :Rosin is larger of initial value Dipping :By 1.5~2.0mm from the root of lead Class (X7R): Within 10% of initial value Ⅰ ± ℃ ± ± ℃ ± Ⅱ ± Q / Tanδ To satisfy the specified initial value Insulation Resistance To satisfy the specified initial value - 105 - ± RDH Series-Radial Dipped Ultra High Voltage Capacitor Holy Stone RDH Series Specification & Test Condition Item Temperature Cycle Specification Appearance No mechanical damage shall occur Ⅰ ℃ ± Appearance No mechanical damage shall occur Ⅰ Ⅱ ± Class (X7R): Within 15% of initial value Q / Tanδ Ⅰ ± Class (NPO): More Than 30pF : Q 350 30pF & Below: Q 275+2.5C Class (X7R): Maximum 5.0% ≧ Ⅱ Appearance No mechanical damage shall occur Class (NPO): Within 3% or 0.3pF whichever is larger of initial value Class (X7R): Within 15% of initial value Q / Tanδ Ⅰ Ⅰ Insulation Resistance ± ± Class (NPO): More Than 30pF : Q 350 30pF & Below: Q 275+2.5C Class (X7R): Maximum 5% Ⅱ ≧ ≧ ± 1,000MΩ or 50/C Ω whichever is smaller. (C in Farad) Appearance No mechanical damage shall occur Capacitance Within the specified tolerance Q / Tanδ Ⅰ ± Ⅱ ± ClassⅡ capacitor shall be set for 48±4 hours at room temperature after one hour heat treatment at 150 +0/-10 ℃before initial measurement. Temperature : 40 ± 2 ℃ Relative Humidity : 90 ~95%RH Test Time : 500 +12/-0 hr Measure at room temperature after cooling for Class : 24 2 Hours Class : 48 4 Hours Ⅰ ± Ⅱ ± ± 1,000MΩ or 50/C Ω whichever is smaller. (C in Farad) Ⅱ Vibration ≧ Insulation Resistance Capacitance ℃ ± Capacitance Class (NPO): Within 5% or 0.5pF whichever is larger of initial value High Temperature Load (Life Test) ± Class capacitor shall be set for 48 4 hours at room temperature after one hour heat treatment at 150 +0/-10 before initial Capacitance Class (NPO): measurement. Within 2.5% or 0.25pF whichever Capacitor shall be subjected to five cycles of is larger of initial value the temperature cycle as following: Class (X7R): Time(min) Step Temp.( ) Within 7.5% of initial value 1 Min Rated Temp.+0/-3 (-55) 30 Q / Tanδ To satisfy the specified initial 2 25 3 value 3 Max Rated Temp.+3/-0 (125) 30 Insulation To satisfy the specified initial 4 25 3 Resistance value Measure at room temperature after cooling for Class : 24 2 Hours Class : 48 4 Hours Ⅱ Humidity Ⅱ Test Condition To satisfy the specified initial value - 106 - Solder the capacitor on P.C. board shown in Fig 2. before testing. Apply the voltage below at 125 2 C for 1000 +48/-0h Applied Voltage : ±˚ Rated Voltage V≤250Vdc 250Vdc < V< 1KVdc More Than 1KVdc(include 1KV) Applied Voltage 150%Rated Voltage 120%Rated Voltage 100%Rated Voltage Temperature : max. operating temperature Test Time : 1000 +12/-0Hr Current Applied : 50 mA Max. Measure at room temperature after cooling for Class : 24 2 Hours Class : 48 4 Hours Ⅰ ± Ⅱ ± Solder the capacitor on P.C. Board shown in Fig 2. before testing. Vibrate the capacitor with amplitude of 1.5mm P-P changing the frequencies from 10Hz to 55Hz and back to 10Hz in about 1 min. Repeat this for 2 hours each in 3perpendicular directions.